Commit 1a214ae5 authored by Srinivas Pandruvada's avatar Srinivas Pandruvada Committed by Jiri Kosina

iio: hid-sensor-hub: Remove hard coded indexes

Remove the hard coded indexes, instead search for usage id and
use the index to set the power and report state.
This will fix issue, where the report descriptor doesn't contain
the full list of possible selector for power and report state.
Signed-off-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan's avatarJonathan Cameron <jic23@kernel.org>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent e02cee48
......@@ -38,29 +38,40 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
if (state) {
if (sensor_hub_device_open(st->hsdev))
return -EIO;
state_val =
HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
report_val =
HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
state_val = hid_sensor_get_usage_index(st->hsdev,
st->power_state.report_id,
st->power_state.index,
HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM);
report_val = hid_sensor_get_usage_index(st->hsdev,
st->report_state.report_id,
st->report_state.index,
HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM);
} else {
sensor_hub_device_close(st->hsdev);
state_val =
HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
report_val =
HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
state_val = hid_sensor_get_usage_index(st->hsdev,
st->power_state.report_id,
st->power_state.index,
HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM);
report_val = hid_sensor_get_usage_index(st->hsdev,
st->report_state.report_id,
st->report_state.index,
HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM);
}
st->data_ready = state;
state_val += st->power_state.logical_minimum;
report_val += st->report_state.logical_minimum;
sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
if (state_val >= 0) {
state_val += st->power_state.logical_minimum;
sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
st->power_state.index,
(s32)state_val);
}
sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
if (report_val >= 0) {
report_val += st->report_state.logical_minimum;
sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
st->report_state.index,
(s32)report_val);
}
return 0;
}
......
......@@ -130,15 +130,15 @@
#define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS 0x1000
/* Power state enumerations */
#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x00
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x01
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x02
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x03
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x04
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x05
#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x200850
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x200851
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x200852
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x200853
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x200854
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x200855
/* Report State enumerations */
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x00
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x01
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x200840
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x200841
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment