Commit f5275902 authored by Finn Thain's avatar Finn Thain Committed by Christoph Hellwig

ncr5380: Remove ENABLE_IRQ/DISABLE_IRQ macros

atari_NCR5380.c enables its IRQ when it is already enabled. Sun3 doesn't
use the ENABLE_IRQ/DISABLE_IRQ cruft. Remove it.
Signed-off-by: default avatarFinn Thain <[email protected]>
Reviewed-by: Hannes Reinecke's avatarHannes Reinecke <[email protected]>
Tested-by: default avatarMichael Schmitz <[email protected]>
Signed-off-by: default avatarChristoph Hellwig <[email protected]>
parent 2231ef87
......@@ -1227,7 +1227,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
NCR5380_dprint(NDEBUG_INTR, instance);
if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
done = 0;
ENABLE_IRQ();
dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
NCR5380_reselect(instance);
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
......@@ -1257,7 +1256,6 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id)
dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
NCR5380_dma_complete( instance );
done = 0;
ENABLE_IRQ();
} else
#endif /* REAL_DMA */
{
......
......@@ -157,23 +157,6 @@ static inline unsigned long SCSI_DMA_GETADR(void)
return adr;
}
static inline void ENABLE_IRQ(void)
{
if (IS_A_TT())
atari_enable_irq(IRQ_TT_MFP_SCSI);
else
atari_enable_irq(IRQ_MFP_FSCSI);
}
static inline void DISABLE_IRQ(void)
{
if (IS_A_TT())
atari_disable_irq(IRQ_TT_MFP_SCSI);
else
atari_disable_irq(IRQ_MFP_FSCSI);
}
#define HOSTDATA_DMALEN (((struct NCR5380_hostdata *) \
(atari_scsi_host->hostdata))->dma_len)
......@@ -373,10 +356,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy)
NCR5380_intr(irq, dummy);
#if 0
/* To be sure the int is not masked */
atari_enable_irq(IRQ_TT_MFP_SCSI);
#endif
return IRQ_HANDLED;
}
......
......@@ -1155,7 +1155,6 @@ static irqreturn_t NCR5380_intr (int irq, void *dev_id)
NCR5380_dprint(NDEBUG_INTR, instance);
if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
done = 0;
// ENABLE_IRQ();
dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
NCR5380_reselect(instance);
(void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
......@@ -1188,7 +1187,6 @@ static irqreturn_t NCR5380_intr (int irq, void *dev_id)
dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
NCR5380_dma_complete( instance );
done = 0;
// ENABLE_IRQ();
} else
#endif /* REAL_DMA */
{
......
......@@ -69,13 +69,6 @@
extern int sun3_map_test(unsigned long, char *);
#ifdef SUN3_SCSI_VME
#define ENABLE_IRQ()
#else
#define ENABLE_IRQ() enable_irq( IRQ_SUN3_SCSI );
#endif
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
static int setup_cmd_per_lun = -1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment