Commit bb06b737 authored by Hartley Sweeten's avatar Hartley Sweeten Committed by Russell King

ARM: 5881/1: vic.c: reorganize code

This reorganizes the vic.c code in anticipation of a second patch
to use struct vic_device as the data stored in set_irq_chip_data().

The code now has the following flow:

1) struct vic_device definition, static variables, and to_vic()
   moved to the start of the code.
2) common code (vic_init2)
3) vic power management callbacks
4) vic power management initialization/registration
5) irq_chip callbacks
6) vendor specific vic initialization
7) vic initialization

In addition the typo vik_init_st is fixed (vic_init_st).

There is no functional change with this patch.
Tested-by: default avatarLinus Walleij <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Alessandro Rubini <[email protected]>

Comments from Hartley Sweeten:

 Please change from Cc to:
Tested-by: default avatarAlessandro Rubini <[email protected]>
Signed-off-by: default avatarH Hartley Sweeten <[email protected]>
Signed-off-by: default avatarRussell King <[email protected]>
parent 346e34ab
......@@ -18,6 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
......@@ -28,48 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
static void vic_ack_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
/* moreover, clear the soft-triggered, in case it was the reason */
writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
}
static void vic_mask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE);
}
/**
* vic_init2 - common initialisation code
* @base: Base of the VIC.
*
* Common initialisation code for registeration
* and resume.
*/
static void vic_init2(void __iomem *base)
{
int i;
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
#if defined(CONFIG_PM)
/**
* struct vic_device - VIC PM device
......@@ -99,13 +58,34 @@ struct vic_device {
/* we cannot allocate memory when VICs are initially registered */
static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
static int vic_id;
static inline struct vic_device *to_vic(struct sys_device *sys)
{
return container_of(sys, struct vic_device, sysdev);
}
#endif /* CONFIG_PM */
static int vic_id;
/**
* vic_init2 - common initialisation code
* @base: Base of the VIC.
*
* Common initialisation code for registeration
* and resume.
*/
static void vic_init2(void __iomem *base)
{
int i;
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
#if defined(CONFIG_PM)
static int vic_class_resume(struct sys_device *dev)
{
struct vic_device *vic = to_vic(dev);
......@@ -158,31 +138,6 @@ struct sysdev_class vic_class = {
.resume = vic_class_resume,
};
/**
* vic_pm_register - Register a VIC for later power management control
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
*/
static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
{
struct vic_device *v;
if (vic_id >= ARRAY_SIZE(vic_devices))
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
else {
v = &vic_devices[vic_id];
v->base = base;
v->resume_sources = resume_sources;
v->irq = irq;
vic_id++;
}
}
/**
* vic_pm_init - initicall to register VIC pm
*
......@@ -219,9 +174,60 @@ static int __init vic_pm_init(void)
return 0;
}
late_initcall(vic_pm_init);
/**
* vic_pm_register - Register a VIC for later power management control
* @base: The base address of the VIC.
* @irq: The base IRQ for the VIC.
* @resume_sources: bitmask of interrupts allowed for resume sources.
*
* Register the VIC with the system device tree so that it can be notified
* of suspend and resume requests and ensure that the correct actions are
* taken to re-instate the settings on resume.
*/
static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
{
struct vic_device *v;
if (vic_id >= ARRAY_SIZE(vic_devices))
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
else {
v = &vic_devices[vic_id];
v->base = base;
v->resume_sources = resume_sources;
v->irq = irq;
vic_id++;
}
}
#else
static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
#endif /* CONFIG_PM */
static void vic_ack_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
/* moreover, clear the soft-triggered, in case it was the reason */
writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
}
static void vic_mask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(unsigned int irq)
{
void __iomem *base = get_irq_chip_data(irq);
irq &= 31;
writel(1 << irq, base + VIC_INT_ENABLE);
}
#if defined(CONFIG_PM)
static struct vic_device *vic_from_irq(unsigned int irq)
{
struct vic_device *v = vic_devices;
......@@ -255,10 +261,7 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
return 0;
}
#else
static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
#define vic_set_wake NULL
#endif /* CONFIG_PM */
......@@ -270,9 +273,62 @@ static struct irq_chip vic_chip = {
.set_wake = vic_set_wake,
};
/* The PL190 cell from ARM has been modified by ST, so handle both here */
static void vik_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources);
/*
* The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
* The original cell has 32 interrupts, while the modified one has 64,
* replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
* the probe function is called twice, with base set to offset 000
* and 020 within the page. We call this "second block".
*/
static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
{
unsigned int i;
int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
/* Disable all interrupts initially. */
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
/*
* Make sure we clear all existing interrupts. The vector registers
* in this cell are after the second block of general registers,
* so we can address them using standard offsets, but only from
* the second base address, which is 0x20 in the page
*/
if (vic_2nd_block) {
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
/* ST has 16 vectors as well, but we don't enable them by now */
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(0, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
}
/**
* vic_init - initialise a vectored interrupt controller
......@@ -299,7 +355,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
switch(vendor) {
case AMBA_VENDOR_ST:
vik_init_st(base, irq_start, vic_sources);
vic_init_st(base, irq_start, vic_sources);
return;
default:
printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
......@@ -343,60 +399,3 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
vic_pm_register(base, irq_start, resume_sources);
}
/*
* The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
* The original cell has 32 interrupts, while the modified one has 64,
* replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
* the probe function is called twice, with base set to offset 000
* and 020 within the page. We call this "second block".
*/
static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
u32 vic_sources)
{
unsigned int i;
int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
/* Disable all interrupts initially. */
writel(0, base + VIC_INT_SELECT);
writel(0, base + VIC_INT_ENABLE);
writel(~0, base + VIC_INT_ENABLE_CLEAR);
writel(0, base + VIC_IRQ_STATUS);
writel(0, base + VIC_ITCR);
writel(~0, base + VIC_INT_SOFT_CLEAR);
/*
* Make sure we clear all existing interrupts. The vector registers
* in this cell are after the second block of general registers,
* so we can address them using standard offsets, but only from
* the second base address, which is 0x20 in the page
*/
if (vic_2nd_block) {
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
/* ST has 16 vectors as well, but we don't enable them by now */
for (i = 0; i < 16; i++) {
void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(0, reg);
}
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment