Commit 6e42a3f5 authored by Joel Stanley's avatar Joel Stanley Committed by David S. Miller

net/ncsi: Use netdev_dbg for debug messages

This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to
netdev_dbg.

As Joe explains:

> netdev_dbg is not included in object code unless
> DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set.
> And then, it is not emitted into the log unless
> DEBUG is set or this specific netdev_dbg is enabled
> via the dynamic debug control file.

Which is what we're after in this case.
Acked-by: default avatarSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley's avatarJoel Stanley <joel@jms.id.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5d3b1467
......@@ -148,9 +148,9 @@ static int ncsi_aen_handler_hncdsc(struct ncsi_dev_priv *ndp,
hncdsc = (struct ncsi_aen_hncdsc_pkt *)h;
ncm->data[3] = ntohl(hncdsc->status);
spin_unlock_irqrestore(&nc->lock, flags);
netdev_printk(KERN_DEBUG, ndp->ndev.dev,
"NCSI: host driver %srunning on channel %u\n",
ncm->data[3] & 0x1 ? "" : "not ", nc->id);
netdev_dbg(ndp->ndev.dev,
"NCSI: host driver %srunning on channel %u\n",
ncm->data[3] & 0x1 ? "" : "not ", nc->id);
return 0;
}
......
......@@ -788,8 +788,8 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
}
break;
case ncsi_dev_state_config_done:
netdev_printk(KERN_DEBUG, ndp->ndev.dev,
"NCSI: channel %u config done\n", nc->id);
netdev_dbg(ndp->ndev.dev, "NCSI: channel %u config done\n",
nc->id);
spin_lock_irqsave(&nc->lock, flags);
if (nc->reconfigure_needed) {
/* This channel's configuration has been updated
......@@ -804,8 +804,7 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
list_add_tail_rcu(&nc->link, &ndp->channel_queue);
spin_unlock_irqrestore(&ndp->lock, flags);
netdev_printk(KERN_DEBUG, dev,
"Dirty NCSI channel state reset\n");
netdev_dbg(dev, "Dirty NCSI channel state reset\n");
ncsi_process_next_channel(ndp);
break;
}
......@@ -908,9 +907,9 @@ static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)
}
ncm = &found->modes[NCSI_MODE_LINK];
netdev_printk(KERN_DEBUG, ndp->ndev.dev,
"NCSI: Channel %u added to queue (link %s)\n",
found->id, ncm->data[2] & 0x1 ? "up" : "down");
netdev_dbg(ndp->ndev.dev,
"NCSI: Channel %u added to queue (link %s)\n",
found->id, ncm->data[2] & 0x1 ? "up" : "down");
out:
spin_lock_irqsave(&ndp->lock, flags);
......@@ -1316,9 +1315,9 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)
if ((ndp->ndev.state & 0xff00) ==
ncsi_dev_state_config ||
!list_empty(&nc->link)) {
netdev_printk(KERN_DEBUG, nd->dev,
"NCSI: channel %p marked dirty\n",
nc);
netdev_dbg(nd->dev,
"NCSI: channel %p marked dirty\n",
nc);
nc->reconfigure_needed = true;
}
spin_unlock_irqrestore(&nc->lock, flags);
......@@ -1336,8 +1335,7 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)
list_add_tail_rcu(&nc->link, &ndp->channel_queue);
spin_unlock_irqrestore(&ndp->lock, flags);
netdev_printk(KERN_DEBUG, nd->dev,
"NCSI: kicked channel %p\n", nc);
netdev_dbg(nd->dev, "NCSI: kicked channel %p\n", nc);
n++;
}
}
......@@ -1368,8 +1366,8 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
list_for_each_entry_rcu(vlan, &ndp->vlan_vids, list) {
n_vids++;
if (vlan->vid == vid) {
netdev_printk(KERN_DEBUG, dev,
"NCSI: vid %u already registered\n", vid);
netdev_dbg(dev, "NCSI: vid %u already registered\n",
vid);
return 0;
}
}
......@@ -1388,7 +1386,7 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
vlan->vid = vid;
list_add_rcu(&vlan->list, &ndp->vlan_vids);
netdev_printk(KERN_DEBUG, dev, "NCSI: Added new vid %u\n", vid);
netdev_dbg(dev, "NCSI: Added new vid %u\n", vid);
found = ncsi_kick_channels(ndp) != 0;
......@@ -1417,8 +1415,7 @@ int ncsi_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
/* Remove the VLAN id from our internal list */
list_for_each_entry_safe(vlan, tmp, &ndp->vlan_vids, list)
if (vlan->vid == vid) {
netdev_printk(KERN_DEBUG, dev,
"NCSI: vid %u found, removing\n", vid);
netdev_dbg(dev, "NCSI: vid %u found, removing\n", vid);
list_del_rcu(&vlan->list);
found = true;
kfree(vlan);
......@@ -1545,7 +1542,7 @@ void ncsi_stop_dev(struct ncsi_dev *nd)
}
}
netdev_printk(KERN_DEBUG, ndp->ndev.dev, "NCSI: Stopping device\n");
netdev_dbg(ndp->ndev.dev, "NCSI: Stopping device\n");
ncsi_report_link(ndp, true);
}
EXPORT_SYMBOL_GPL(ncsi_stop_dev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment