Commit 3dabec71 authored by adam radford's avatar adam radford Committed by James Bottomley

[SCSI] 3w-9xxx: add MSI support and misc fixes

This patch for the 3w-9xxx scsi driver applies on top of the
BKL-pushdown changes in -git9.

This patch does the following:

- Increase max AENs drained to 256.
- Add MSI support and "use_msi" module parameter.
- Fix bug in twa_get_param() on 4GB+.
- Use pci_resource_len() for ioremap().
Signed-off-by: default avatarJames Bottomley <[email protected]>
parent 6bd522f6
......@@ -4,7 +4,7 @@
Written By: Adam Radford <[email protected]>
Modifications By: Tom Couch <[email protected]>
Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
Copyright (C) 2004-2008 Applied Micro Circuits Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......@@ -71,6 +71,10 @@
Add support for 9650SE controllers.
2.26.02.009 - Fix dma mask setting to fallback to 32-bit if 64-bit fails.
2.26.02.010 - Add support for 9690SA controllers.
2.26.02.011 - Increase max AENs drained to 256.
Add MSI support and "use_msi" module parameter.
Fix bug in twa_get_param() on 4GB+.
Use pci_resource_len() for ioremap().
*/
#include <linux/module.h>
......@@ -95,7 +99,7 @@
#include "3w-9xxx.h"
/* Globals */
#define TW_DRIVER_VERSION "2.26.02.010"
#define TW_DRIVER_VERSION "2.26.02.011"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
......@@ -107,6 +111,10 @@ MODULE_DESCRIPTION ("3ware 9000 Storage Controller Linux Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(TW_DRIVER_VERSION);
static int use_msi = 0;
module_param(use_msi, int, S_IRUGO);
MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0");
/* Function prototypes */
static void twa_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header);
static int twa_aen_read_queue(TW_Device_Extension *tw_dev, int request_id);
......@@ -1038,7 +1046,6 @@ static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int tabl
TW_Command_Full *full_command_packet;
TW_Command *command_packet;
TW_Param_Apache *param;
unsigned long param_value;
void *retval = NULL;
/* Setup the command packet */
......@@ -1057,9 +1064,8 @@ static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int tabl
param->table_id = cpu_to_le16(table_id | 0x8000);
param->parameter_id = cpu_to_le16(parameter_id);
param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes);
param_value = tw_dev->generic_buffer_phys[request_id];
command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(param_value);
command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
command_packet->byte8_offset.param.sgl[0].length = cpu_to_le32(TW_SECTOR_SIZE);
/* Post the command packet to the board */
......@@ -2000,7 +2006,7 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
{
struct Scsi_Host *host = NULL;
TW_Device_Extension *tw_dev;
u32 mem_addr;
unsigned long mem_addr, mem_len;
int retval = -ENODEV;
retval = pci_enable_device(pdev);
......@@ -2045,13 +2051,16 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
goto out_free_device_extension;
}
if (pdev->device == PCI_DEVICE_ID_3WARE_9000)
if (pdev->device == PCI_DEVICE_ID_3WARE_9000) {
mem_addr = pci_resource_start(pdev, 1);
else
mem_len = pci_resource_len(pdev, 1);
} else {
mem_addr = pci_resource_start(pdev, 2);
mem_len = pci_resource_len(pdev, 2);
}
/* Save base address */
tw_dev->base_addr = ioremap(mem_addr, PAGE_SIZE);
tw_dev->base_addr = ioremap(mem_addr, mem_len);
if (!tw_dev->base_addr) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x35, "Failed to ioremap");
goto out_release_mem_region;
......@@ -2086,7 +2095,7 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
pci_set_drvdata(pdev, host);
printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%x, IRQ: %d.\n",
printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%lx, IRQ: %d.\n",
host->host_no, mem_addr, pdev->irq);
printk(KERN_WARNING "3w-9xxx: scsi%d: Firmware %s, BIOS %s, Ports: %d.\n",
host->host_no,
......@@ -2097,6 +2106,11 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
le32_to_cpu(*(int *)twa_get_param(tw_dev, 2, TW_INFORMATION_TABLE,
TW_PARAM_PORTCOUNT, TW_PARAM_PORTCOUNT_LENGTH)));
/* Try to enable MSI */
if (use_msi && (pdev->device != PCI_DEVICE_ID_3WARE_9000) &&
!pci_enable_msi(pdev))
set_bit(TW_USING_MSI, &tw_dev->flags);
/* Now setup the interrupt handler */
retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev);
if (retval) {
......@@ -2120,6 +2134,8 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
return 0;
out_remove_host:
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_disable_msi(pdev);
scsi_remove_host(host);
out_iounmap:
iounmap(tw_dev->base_addr);
......@@ -2151,6 +2167,10 @@ static void twa_remove(struct pci_dev *pdev)
/* Shutdown the card */
__twa_shutdown(tw_dev);
/* Disable MSI if enabled */
if (test_bit(TW_USING_MSI, &tw_dev->flags))
pci_disable_msi(pdev);
/* Free IO remapping */
iounmap(tw_dev->base_addr);
......
......@@ -4,7 +4,7 @@
Written By: Adam Radford <[email protected]>
Modifications By: Tom Couch <[email protected]>
Copyright (C) 2004-2007 Applied Micro Circuits Corporation.
Copyright (C) 2004-2008 Applied Micro Circuits Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......@@ -319,8 +319,8 @@ static twa_message_type twa_error_table[] = {
/* Compatibility defines */
#define TW_9000_ARCH_ID 0x5
#define TW_CURRENT_DRIVER_SRL 30
#define TW_CURRENT_DRIVER_BUILD 80
#define TW_CURRENT_DRIVER_SRL 35
#define TW_CURRENT_DRIVER_BUILD 0
#define TW_CURRENT_DRIVER_BRANCH 0
/* Phase defines */
......@@ -352,8 +352,9 @@ static twa_message_type twa_error_table[] = {
#define TW_MAX_RESET_TRIES 2
#define TW_MAX_CMDS_PER_LUN 254
#define TW_MAX_RESPONSE_DRAIN 256
#define TW_MAX_AEN_DRAIN 40
#define TW_MAX_AEN_DRAIN 255
#define TW_IN_RESET 2
#define TW_USING_MSI 3
#define TW_IN_ATTENTION_LOOP 4
#define TW_MAX_SECTORS 256
#define TW_AEN_WAIT_TIME 1000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment