Commit 2231ef87 authored by Finn Thain's avatar Finn Thain Committed by Christoph Hellwig

sun3_scsi: Move macro definitions

The #defines in sun3_scsi.h are intended to influence subsequent #includes
in sun3_scsi.c. IMHO, that's too convoluted.

Move sun3_scsi.h macro definitions to sun3_scsi.c, consistent with other
NCR5380 drivers.

Omit the unused NCR5380_local_declare() and NCR5380_setup() macros.
Signed-off-by: default avatarFinn Thain <[email protected]>
Reviewed-by: Hannes Reinecke's avatarHannes Reinecke <[email protected]>
Signed-off-by: default avatarChristoph Hellwig <[email protected]>
parent 0d31f875
......@@ -33,18 +33,42 @@
#include <asm/io.h>
#include <asm/dvma.h>
/* dma on! */
#define REAL_DMA
#include <scsi/scsi_host.h>
#include "sun3_scsi.h"
#include "NCR5380.h"
extern int sun3_map_test(unsigned long, char *);
/* Definitions for the core NCR5380 driver. */
/*#define RESET_BOOT */
#define REAL_DMA
#define RESET_RUN_DONE
/* #define SUPPORT_TAGS */
/* #define MAX_TAGS 32 */
#define NCR5380_implementation_fields /* none */
#define NCR5380_read(reg) sun3scsi_read(reg)
#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
#define NCR5380_show_info sun3scsi_show_info
#define NCR5380_info sun3scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
sun3scsi_dma_setup(data, count, 0)
#define NCR5380_dma_write_setup(instance, data, count) \
sun3scsi_dma_setup(data, count, 1)
#define NCR5380_dma_residual(instance) \
sun3scsi_dma_residual(instance)
#define NCR5380_dma_xfer_len(instance, cmd, phase) \
sun3scsi_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
#include "NCR5380.h"
extern int sun3_map_test(unsigned long, char *);
#ifdef SUN3_SCSI_VME
#define ENABLE_IRQ()
#else
......@@ -65,9 +89,7 @@ module_param(setup_use_tagged_queuing, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
static struct scsi_cmnd *sun3_dma_setup_done = NULL;
#define RESET_RUN_DONE
/* #define RESET_BOOT */
#define AFTER_RESET_DELAY (HZ/2)
......@@ -80,6 +102,7 @@ static struct scsi_cmnd *sun3_dma_setup_done = NULL;
/* minimum number of bytes to do dma on */
#define SUN3_DMA_MINSIZE 128
static struct scsi_cmnd *sun3_dma_setup_done;
static unsigned char *sun3_scsi_regp;
static volatile struct sun3_dma_regs *dregs;
static struct sun3_udc_regs *udc_regs;
......@@ -131,9 +154,6 @@ static inline void sun3_udc_write(unsigned short val, unsigned char reg)
static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
{
unsigned long end;
NCR5380_local_declare();
NCR5380_setup(instance);
/*
* Do a SCSI reset to clean up the bus during initialization. No
......@@ -210,7 +230,6 @@ static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
void sun3_sun3_debug (void)
{
unsigned long flags;
NCR5380_local_declare();
if (default_instance) {
local_irq_save(flags);
......
......@@ -18,31 +18,6 @@
#ifndef SUN3_SCSI_H
#define SUN3_SCSI_H
#define MAX_TAGS 32
#define NCR5380_implementation_fields /* none */
#define NCR5380_local_declare() \
struct Scsi_Host *_instance
#define NCR5380_setup(instance) \
_instance = instance
#define NCR5380_read(reg) sun3scsi_read(reg)
#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
#define NCR5380_show_info sun3scsi_show_info
#define NCR5380_info sun3scsi_info
#define NCR5380_dma_xfer_len(i, cmd, phase) \
sun3scsi_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
#define NCR5380_dma_write_setup(instance, data, count) sun3scsi_dma_setup(data, count, 1)
#define NCR5380_dma_read_setup(instance, data, count) sun3scsi_dma_setup(data, count, 0)
#define NCR5380_dma_residual sun3scsi_dma_residual
/* additional registers - mainly DMA control regs */
/* these start at regbase + 8 -- directly after the NCR regs */
struct sun3_dma_regs {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment