Commit 1877d2c5 authored by Mark Greer's avatar Mark Greer Committed by Samuel Ortiz

NFC: trf7970a: Enable pins are active high not active low

The example DTS code for the trf7970a sets the GPIOs for the EN
and EN2 pins to active low when they are really active high so
correct the error.
Acked-by: Rob Herring's avatarRob Herring <[email protected]>
Signed-off-by: default avatarMark Greer <[email protected]>
Signed-off-by: default avatarSamuel Ortiz <[email protected]>
parent a34631c2
......@@ -36,8 +36,8 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
spi-max-frequency = <2000000>;
interrupt-parent = <&gpio2>;
interrupts = <14 0>;
ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
<&gpio2 5 GPIO_ACTIVE_LOW>;
ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
<&gpio2 5 GPIO_ACTIVE_HIGH>;
vin-supply = <&ldo3_reg>;
vdd-io-supply = <&ldo2_reg>;
autosuspend-delay = <30000>;
Markdown is supported
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment