Commit 0be8ce73 authored by Axel Lin's avatar Axel Lin Committed by Samuel Ortiz

NFC: st21nfca: Convert to use devm_gpio_request_one

This simplifies the code a bit.
Acked-by: default avatarChristophe RICARD <[email protected]>
Signed-off-by: default avatarAxel Lin <[email protected]>
Signed-off-by: default avatarSamuel Ortiz <[email protected]>
parent ce3a5de7
......@@ -525,17 +525,13 @@ static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
}
/* GPIO request and configuration */
r = devm_gpio_request(&client->dev, gpio, "clf_enable");
r = devm_gpio_request_one(&client->dev, gpio, GPIOF_OUT_INIT_HIGH,
"clf_enable");
if (r) {
nfc_err(&client->dev, "Failed to request enable pin\n");
return -ENODEV;
}
r = gpio_direction_output(gpio, 1);
if (r) {
nfc_err(&client->dev, "Failed to set enable pin direction as output\n");
return -ENODEV;
}
phy->gpio_ena = gpio;
/* IRQ */
......@@ -576,32 +572,20 @@ static int st21nfca_hci_i2c_request_resources(struct i2c_client *client)
phy->gpio_ena = pdata->gpio_ena;
phy->irq_polarity = pdata->irq_polarity;
r = devm_gpio_request(&client->dev, phy->gpio_irq, "wake_up");
r = devm_gpio_request_one(&client->dev, phy->gpio_irq, GPIOF_IN,
"wake_up");
if (r) {
pr_err("%s : gpio_request failed\n", __FILE__);
return -ENODEV;
}
r = gpio_direction_input(phy->gpio_irq);
if (r) {
pr_err("%s : gpio_direction_input failed\n", __FILE__);
return -ENODEV;
}
if (phy->gpio_ena > 0) {
r = devm_gpio_request(&client->dev,
phy->gpio_ena, "clf_enable");
r = devm_gpio_request_one(&client->dev, phy->gpio_ena,
GPIOF_OUT_INIT_HIGH, "clf_enable");
if (r) {
pr_err("%s : ena gpio_request failed\n", __FILE__);
return -ENODEV;
}
r = gpio_direction_output(phy->gpio_ena, 1);
if (r) {
pr_err("%s : ena gpio_direction_output failed\n",
__FILE__);
return -ENODEV;
}
}
/* IRQ */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment