Commit 039df7a7 authored by Mark Brown's avatar Mark Brown
Browse files

Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/s2m'...

Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/s2m' and 'regulator/fix/s5m8767' into regulator-linus
......@@ -123,6 +123,7 @@ struct bcm590xx_info {
#define BCM590XX_REG_RANGES(_name, _ranges) \
{ \
.name = #_name, \
.n_voltages = 64, \
.n_linear_ranges = ARRAY_SIZE(_ranges), \
.linear_ranges = _ranges, \
}
......
......@@ -192,13 +192,11 @@ static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
if (!ramp_enable)
goto ramp_disable;
if (enable_shift) {
ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
1 << enable_shift, 1 << enable_shift);
if (ret) {
dev_err(&rdev->dev, "failed to enable ramp rate\n");
return ret;
}
ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
1 << enable_shift, 1 << enable_shift);
if (ret) {
dev_err(&rdev->dev, "failed to enable ramp rate\n");
return ret;
}
ramp_val = get_ramp_delay(ramp_delay);
......
......@@ -202,13 +202,11 @@ static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
if (!ramp_enable)
goto ramp_disable;
if (enable_shift) {
ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
1 << enable_shift, 1 << enable_shift);
if (ret) {
dev_err(&rdev->dev, "failed to enable ramp rate\n");
return ret;
}
ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
1 << enable_shift, 1 << enable_shift);
if (ret) {
dev_err(&rdev->dev, "failed to enable ramp rate\n");
return ret;
}
ramp_val = get_ramp_delay(ramp_delay);
......
......@@ -964,6 +964,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
config.driver_data = s5m8767;
config.regmap = iodev->regmap_pmic;
config.of_node = pdata->regulators[i].reg_node;
config.ena_gpio = config.ena_gpio_flags = 0;
if (pdata->regulators[i].ext_control_gpio)
s5m8767_regulator_config_ext_control(s5m8767,
&pdata->regulators[i], &config);
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment