Commit 0590ff26 authored by Eric Sunshine's avatar Eric Sunshine Committed by Junio C Hamano

t: use test_write_lines() instead of series of 'echo' commands

These tests employ a noisy subshell (with missing &&-chain) to feed
input into Git commands or files:

    (echo a; echo b; echo c) | git some-command ...

Simplify by taking advantage of test_write_lines():

    test_write_lines a b c | git some-command ...
Signed-off-by: Eric Sunshine's avatarEric Sunshine <sunshine@sunshineco.com>
Signed-off-by: default avatarJunio C Hamano <gitster@pobox.com>
parent 83279748
......@@ -156,7 +156,7 @@ test_expect_success PERL 'commit --interactive gives cache-tree on partial commi
return 44;
}
EOT
(echo p; echo 1; echo; echo s; echo n; echo y; echo q) |
test_write_lines p 1 "" s n y q |
git commit --interactive -m foo &&
test_cache_tree
'
......
......@@ -23,7 +23,7 @@ test_expect_success setup '
test_expect_success 'multi-read' '
read_tree_must_succeed initial master side &&
(echo a; echo b/c) >expect &&
test_write_lines a b/c >expect &&
git ls-files >actual &&
test_cmp expect actual
'
......
......@@ -20,33 +20,33 @@ test_expect_success PERL 'setup' '
test_expect_success PERL 'saying "n" does nothing' '
set_and_save_state dir/foo work head &&
(echo n; echo n) | git checkout -p &&
test_write_lines n n | git checkout -p &&
verify_saved_state bar &&
verify_saved_state dir/foo
'
test_expect_success PERL 'git checkout -p' '
(echo n; echo y) | git checkout -p &&
test_write_lines n y | git checkout -p &&
verify_saved_state bar &&
verify_state dir/foo head head
'
test_expect_success PERL 'git checkout -p with staged changes' '
set_state dir/foo work index &&
(echo n; echo y) | git checkout -p &&
test_write_lines n y | git checkout -p &&
verify_saved_state bar &&
verify_state dir/foo index index
'
test_expect_success PERL 'git checkout -p HEAD with NO staged changes: abort' '
set_and_save_state dir/foo work head &&
(echo n; echo y; echo n) | git checkout -p HEAD &&
test_write_lines n y n | git checkout -p HEAD &&
verify_saved_state bar &&
verify_saved_state dir/foo
'
test_expect_success PERL 'git checkout -p HEAD with NO staged changes: apply' '
(echo n; echo y; echo y) | git checkout -p HEAD &&
test_write_lines n y y | git checkout -p HEAD &&
verify_saved_state bar &&
verify_state dir/foo head head
'
......@@ -54,14 +54,14 @@ test_expect_success PERL 'git checkout -p HEAD with NO staged changes: apply' '
test_expect_success PERL 'git checkout -p HEAD with change already staged' '
set_state dir/foo index index &&
# the third n is to get out in case it mistakenly does not apply
(echo n; echo y; echo n) | git checkout -p HEAD &&
test_write_lines n y n | git checkout -p HEAD &&
verify_saved_state bar &&
verify_state dir/foo head head
'
test_expect_success PERL 'git checkout -p HEAD^' '
# the third n is to get out in case it mistakenly does not apply
(echo n; echo y; echo n) | git checkout -p HEAD^ &&
test_write_lines n y n | git checkout -p HEAD^ &&
verify_saved_state bar &&
verify_state dir/foo parent parent
'
......@@ -69,7 +69,7 @@ test_expect_success PERL 'git checkout -p HEAD^' '
test_expect_success PERL 'git checkout -p handles deletion' '
set_state dir/foo work index &&
rm dir/foo &&
(echo n; echo y) | git checkout -p &&
test_write_lines n y | git checkout -p &&
verify_saved_state bar &&
verify_state dir/foo index index
'
......@@ -81,21 +81,21 @@ test_expect_success PERL 'git checkout -p handles deletion' '
test_expect_success PERL 'path limiting works: dir' '
set_state dir/foo work head &&
(echo y; echo n) | git checkout -p dir &&
test_write_lines y n | git checkout -p dir &&
verify_saved_state bar &&
verify_state dir/foo head head
'
test_expect_success PERL 'path limiting works: -- dir' '
set_state dir/foo work head &&
(echo y; echo n) | git checkout -p -- dir &&
test_write_lines y n | git checkout -p -- dir &&
verify_saved_state bar &&
verify_state dir/foo head head
'
test_expect_success PERL 'path limiting works: HEAD^ -- dir' '
# the third n is to get out in case it mistakenly does not apply
(echo y; echo n; echo n) | git checkout -p HEAD^ -- dir &&
test_write_lines y n n | git checkout -p HEAD^ -- dir &&
verify_saved_state bar &&
verify_state dir/foo parent parent
'
......@@ -103,7 +103,7 @@ test_expect_success PERL 'path limiting works: HEAD^ -- dir' '
test_expect_success PERL 'path limiting works: foo inside dir' '
set_state dir/foo work head &&
# the third n is to get out in case it mistakenly does not apply
(echo y; echo n; echo n) | (cd dir && git checkout -p foo) &&
test_write_lines y n n | (cd dir && git checkout -p foo) &&
verify_saved_state bar &&
verify_state dir/foo head head
'
......
......@@ -509,7 +509,7 @@ test_expect_success 'interrupted squash works as expected' '
one=$(git rev-parse HEAD~3) &&
set_fake_editor &&
test_must_fail env FAKE_LINES="1 squash 3 2" git rebase -i HEAD~3 &&
(echo one; echo two; echo four) > conflict &&
test_write_lines one two four > conflict &&
git add conflict &&
test_must_fail git rebase --continue &&
echo resolved > conflict &&
......@@ -523,10 +523,10 @@ test_expect_success 'interrupted squash works as expected (case 2)' '
one=$(git rev-parse HEAD~3) &&
set_fake_editor &&
test_must_fail env FAKE_LINES="3 squash 1 2" git rebase -i HEAD~3 &&
(echo one; echo four) > conflict &&
test_write_lines one four > conflict &&
git add conflict &&
test_must_fail git rebase --continue &&
(echo one; echo two; echo four) > conflict &&
test_write_lines one two four > conflict &&
git add conflict &&
test_must_fail git rebase --continue &&
echo resolved > conflict &&
......
......@@ -46,13 +46,13 @@ test_expect_success 'setup expected' '
'
test_expect_success 'diff works (initial)' '
(echo d; echo 1) | git add -i >output &&
test_write_lines d 1 | git add -i >output &&
sed -ne "/new file/,/content/p" <output >diff &&
diff_cmp expected diff
'
test_expect_success 'revert works (initial)' '
git add file &&
(echo r; echo 1) | git add -i &&
test_write_lines r 1 | git add -i &&
git ls-files >output &&
! grep . output
'
......@@ -83,13 +83,13 @@ test_expect_success 'setup expected' '
'
test_expect_success 'diff works (commit)' '
(echo d; echo 1) | git add -i >output &&
test_write_lines d 1 | git add -i >output &&
sed -ne "/^index/,/content/p" <output >diff &&
diff_cmp expected diff
'
test_expect_success 'revert works (commit)' '
git add file &&
(echo r; echo 1) | git add -i &&
test_write_lines r 1 | git add -i &&
git add -i </dev/null >output &&
grep "unchanged *+3/-0 file" output
'
......@@ -102,7 +102,7 @@ test_expect_success 'setup expected' '
test_expect_success 'dummy edit works' '
test_set_editor : &&
(echo e; echo a) | git add -p &&
test_write_lines e a | git add -p &&
git diff > diff &&
diff_cmp expected diff
'
......@@ -127,7 +127,7 @@ test_expect_success 'setup fake editor' '
test_expect_success 'bad edit rejected' '
git reset &&
(echo e; echo n; echo d) | git add -p >output &&
test_write_lines e n d | git add -p >output &&
grep "hunk does not apply" output
'
......@@ -140,7 +140,7 @@ test_expect_success 'setup patch' '
test_expect_success 'garbage edit rejected' '
git reset &&
(echo e; echo n; echo d) | git add -p >output &&
test_write_lines e n d | git add -p >output &&
grep "hunk does not apply" output
'
......@@ -170,7 +170,7 @@ test_expect_success 'setup expected' '
'
test_expect_success 'real edit works' '
(echo e; echo n; echo d) | git add -p &&
test_write_lines e n d | git add -p &&
git diff >output &&
diff_cmp expected output
'
......
......@@ -29,14 +29,14 @@ test_expect_success 'setup' '
test_expect_success 'saying "n" does nothing' '
set_state HEAD HEADfile_work HEADfile_index &&
set_state dir/foo work index &&
(echo n; echo n; echo n) | test_must_fail git stash save -p &&
test_write_lines n n n | test_must_fail git stash save -p &&
verify_state HEAD HEADfile_work HEADfile_index &&
verify_saved_state bar &&
verify_state dir/foo work index
'
test_expect_success 'git stash -p' '
(echo y; echo n; echo y) | git stash save -p &&
test_write_lines y n y | git stash save -p &&
verify_state HEAD committed HEADfile_index &&
verify_saved_state bar &&
verify_state dir/foo head index &&
......@@ -51,7 +51,7 @@ test_expect_success 'git stash -p --no-keep-index' '
set_state HEAD HEADfile_work HEADfile_index &&
set_state bar bar_work bar_index &&
set_state dir/foo work index &&
(echo y; echo n; echo y) | git stash save -p --no-keep-index &&
test_write_lines y n y | git stash save -p --no-keep-index &&
verify_state HEAD committed committed &&
verify_state bar bar_work dummy &&
verify_state dir/foo head head &&
......@@ -66,7 +66,7 @@ test_expect_success 'git stash --no-keep-index -p' '
set_state HEAD HEADfile_work HEADfile_index &&
set_state bar bar_work bar_index &&
set_state dir/foo work index &&
(echo y; echo n; echo y) | git stash save --no-keep-index -p &&
test_write_lines y n y | git stash save --no-keep-index -p &&
verify_state HEAD committed committed &&
verify_state dir/foo head head &&
verify_state bar bar_work dummy &&
......
......@@ -19,20 +19,20 @@ test_expect_success PERL 'setup' '
test_expect_success PERL 'saying "n" does nothing' '
set_and_save_state dir/foo work work &&
(echo n; echo n) | git reset -p &&
test_write_lines n n | git reset -p &&
verify_saved_state dir/foo &&
verify_saved_state bar
'
test_expect_success PERL 'git reset -p' '
(echo n; echo y) | git reset -p >output &&
test_write_lines n y | git reset -p >output &&
verify_state dir/foo work head &&
verify_saved_state bar &&
test_i18ngrep "Unstage" output
'
test_expect_success PERL 'git reset -p HEAD^' '
(echo n; echo y) | git reset -p HEAD^ >output &&
test_write_lines n y | git reset -p HEAD^ >output &&
verify_state dir/foo work parent &&
verify_saved_state bar &&
test_i18ngrep "Apply" output
......@@ -45,20 +45,20 @@ test_expect_success PERL 'git reset -p HEAD^' '
test_expect_success PERL 'git reset -p dir' '
set_state dir/foo work work &&
(echo y; echo n) | git reset -p dir &&
test_write_lines y n | git reset -p dir &&
verify_state dir/foo work head &&
verify_saved_state bar
'
test_expect_success PERL 'git reset -p -- foo (inside dir)' '
set_state dir/foo work work &&
(echo y; echo n) | (cd dir && git reset -p -- foo) &&
test_write_lines y n | (cd dir && git reset -p -- foo) &&
verify_state dir/foo work head &&
verify_saved_state bar
'
test_expect_success PERL 'git reset -p HEAD^ -- dir' '
(echo y; echo n) | git reset -p HEAD^ -- dir &&
test_write_lines y n | git reset -p HEAD^ -- dir &&
verify_state dir/foo work parent &&
verify_saved_state bar
'
......
......@@ -107,7 +107,7 @@ test_expect_success 'git clean -id (filter all)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo f; echo "*"; echo; echo c) | \
test_write_lines f "*" "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -129,7 +129,7 @@ test_expect_success 'git clean -id (filter patterns)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo f; echo "part3.* *.out"; echo; echo c) | \
test_write_lines f "part3.* *.out" "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -151,7 +151,7 @@ test_expect_success 'git clean -id (filter patterns 2)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo f; echo "* !*.out"; echo; echo c) | \
test_write_lines f "* !*.out" "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -173,7 +173,7 @@ test_expect_success 'git clean -id (select - all)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo s; echo "*"; echo; echo c) | \
test_write_lines s "*" "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -195,7 +195,7 @@ test_expect_success 'git clean -id (select - none)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo s; echo; echo c) | \
test_write_lines s "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -217,7 +217,7 @@ test_expect_success 'git clean -id (select - number)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo s; echo 3; echo; echo c) | \
test_write_lines s 3 "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -239,7 +239,7 @@ test_expect_success 'git clean -id (select - number 2)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo s; echo 2 3; echo 5; echo; echo c) | \
test_write_lines s "2 3" 5 "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -261,7 +261,7 @@ test_expect_success 'git clean -id (select - number 3)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo s; echo 3,4 5; echo; echo c) | \
test_write_lines s "3,4 5" "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -282,7 +282,7 @@ test_expect_success 'git clean -id (select - filenames)' '
mkdir -p build docs &&
touch a.out foo.txt bar.txt baz.txt &&
(echo s; echo a.out fo ba bar; echo; echo c) | \
test_write_lines s "a.out fo ba bar" "" c |
git clean -id &&
test -f Makefile &&
test ! -f a.out &&
......@@ -298,7 +298,7 @@ test_expect_success 'git clean -id (select - range)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo s; echo 1,3-4; echo 2; echo; echo c) | \
test_write_lines s "1,3-4" 2 "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -320,7 +320,7 @@ test_expect_success 'git clean -id (select - range 2)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo s; echo 4- 1; echo; echo c) | \
test_write_lines s "4- 1" "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -342,7 +342,7 @@ test_expect_success 'git clean -id (inverse select)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo s; echo "*"; echo -5- 1 -2; echo; echo c) | \
test_write_lines s "*" "-5- 1 -2" "" c |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -364,7 +364,7 @@ test_expect_success 'git clean -id (ask)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo a; echo Y; echo y; echo no; echo yes; echo bad; echo) | \
test_write_lines a Y y no yes bad "" |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -386,7 +386,7 @@ test_expect_success 'git clean -id (ask - Ctrl+D)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(echo a; echo Y; echo no; echo yes; echo "\04") | \
test_write_lines a Y no yes "\04" |
git clean -id &&
test -f Makefile &&
test -f README &&
......@@ -408,8 +408,8 @@ test_expect_success 'git clean -id with prefix and path (filter)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(cd build/ && \
(echo f; echo "docs"; echo "*.h"; echo ; echo c) | \
(cd build/ &&
test_write_lines f docs "*.h" "" c |
git clean -id ..) &&
test -f Makefile &&
test -f README &&
......@@ -431,9 +431,8 @@ test_expect_success 'git clean -id with prefix and path (select by name)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(cd build/ && \
(echo s; echo "../docs/"; echo "../src/part3.c"; \
echo "../src/part4.c"; echo; echo c) | \
(cd build/ &&
test_write_lines s ../docs/ ../src/part3.c ../src/part4.c "" c |
git clean -id ..) &&
test -f Makefile &&
test -f README &&
......@@ -455,8 +454,8 @@ test_expect_success 'git clean -id with prefix and path (ask)' '
mkdir -p build docs &&
touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
docs/manual.txt obj.o build/lib.so &&
(cd build/ && \
(echo a; echo Y; echo y; echo no; echo yes; echo bad; echo) | \
(cd build/ &&
test_write_lines a Y y no yes bad "" |
git clean -id ..) &&
test -f Makefile &&
test -f README &&
......
......@@ -47,7 +47,7 @@ test_expect_success 'paths and -a do not mix' '
test_expect_success PERL 'can use paths with --interactive' '
echo bong-o-bong >file &&
# 2: update, 1:st path, that is all, 7: quit
( echo 2; echo 1; echo; echo 7 ) |
test_write_lines 2 1 "" 7 |
git commit -m foo --interactive file &&
git reset --hard HEAD^
'
......@@ -293,7 +293,7 @@ test_expect_success PERL 'interactive add' '
test_expect_success PERL "commit --interactive doesn't change index if editor aborts" '
echo zoo >file &&
test_must_fail git diff --exit-code >diff1 &&
(echo u ; echo "*" ; echo q) |
test_write_lines u "*" q |
(
EDITOR=: &&
export EDITOR &&
......
......@@ -57,18 +57,18 @@ test_expect_success 'setup' '
git checkout -b delete-base branch1 &&
mkdir -p a/a &&
(echo one; echo two; echo 3; echo 4) >a/a/file.txt &&
test_write_lines one two 3 4 >a/a/file.txt &&
git add a/a/file.txt &&
git commit -m"base file" &&
git checkout -b move-to-b delete-base &&
mkdir -p b/b &&
git mv a/a/file.txt b/b/file.txt &&
(echo one; echo two; echo 4) >b/b/file.txt &&
test_write_lines one two 4 >b/b/file.txt &&
git commit -a -m"move to b" &&
git checkout -b move-to-c delete-base &&
mkdir -p c/c &&
git mv a/a/file.txt c/c/file.txt &&
(echo one; echo two; echo 3) >c/c/file.txt &&
test_write_lines one two 3 >c/c/file.txt &&
git commit -a -m"move to c" &&
git checkout -b stash1 master &&
......@@ -349,7 +349,7 @@ test_expect_success 'mergetool keeps tempfiles when aborting delete/delete' '
git checkout -b test$test_count move-to-c &&
test_config mergetool.keepTemporaries true &&
test_must_fail git merge move-to-b &&
! (echo a; echo n) | git mergetool a/a/file.txt &&
! test_write_lines a n | git mergetool a/a/file.txt &&
test -d a/a &&
cat >expect <<-\EOF &&
file_BASE_.txt
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment