Former-commit-id: 548432486384477e8b03d819f254e55869e442cd [formerly 8b66d07c08327fd4401af77651b60215b52ef587]
Former-commit-id: 417d70521adfde445d8fa45b3b739d366c0dff68
Former-commit-id: 750ba7ce

Former-commit-id: dc346a49e05613d6f185678459f3f7daec4a109c [formerly 72b6e51865f9e214b33b9beceb6d894a5d12e03d]
Former-commit-id: 4de8b10073a3512d7c511a673ee83dbcb42f1977
Former-commit-id: c42c06b0

Former-commit-id: 16d3b1717d2b0c7c7b906938ea1d6fab5bf657ad [formerly 59d39e7f3bc391d7123caf1909cb2f64d2e6138f]
Former-commit-id: 6ad4a47ad5a9faa5134fca930b003e4e1652955a
Former-commit-id: 6d2b907f

Currently it will only work with the LS65, but it should be possible to
squeeze it in to the standard-size one I hope.  Just need a couple of
mm on the dovetail position.


Former-commit-id: 994cf2521c50dd68a1632e3b2c7516e2021ec072 [formerly dd4974f7101defdd9b4d391436bc6f536de0f26c]
Former-commit-id: a1b30005babbe6aec611259693cb073920b785da
Former-commit-id: d249722b

Former-commit-id: b03667f2babce4065acfb3f14461053d62846054 [formerly 230d8190565f42439c44c8eed97469438b690c1e]
Former-commit-id: 16a396387060055db8ca665aacd134584ce4e8ad
Former-commit-id: 77f639a8

Former-commit-id: dbaf395ce45430a10b96da161f61f7fc539b57e2 [formerly 5713696ae23191474ff31c09ac5de204b5c89c05]
Former-commit-id: e73d3e8a2e0beb26cdd1fe82c7f02f6a4bfff2d0
Former-commit-id: be0c0653

Former-commit-id: 87837c0f5045037dbc7b6462becebce19dcf6696 [formerly a67f305b5dd9c691b1f2094f1f957e72c19b9bda]
Former-commit-id: 64dd2829ecd107904d3c61e45599774af451050b
Former-commit-id: 5c2e3738

Former-commit-id: b329bc7d031d7305ad739c0cd4647d5df70575d3 [formerly 783996c445ba7b1775ffc5c2d5213aba0e299b08]
Former-commit-id: 95fc84f1c1589693df80d418719dd66d82b4a3dd
Former-commit-id: 43e7b4c7

Former-commit-id: 92be3ed52e6cfbab932628eb1ace98d9f304d845 [formerly 0b97b9c0dda9e550663c05f674af21ea38f7f01a]
Former-commit-id: c469793e9e591d9c98848a4cc745fd14529690a1
Former-commit-id: cdc48ee2

Former-commit-id: 1a9349ff07b78bdde0d59ac6a5f2118f8c98da61 [formerly cbfb9f21ba47e1def920a03de82e3ec66e06b373]
Former-commit-id: c50cf287d025e7b38766bbd5dda9a9404c43c1fb
Former-commit-id: 57670f20

Former-commit-id: 7426281736dfb9a8f7b2567468bbc2ce2e8df5a6 [formerly 451c99507f9304fee53ac5c0abb3d11dd637af58]
Former-commit-id: af7069a97aff3e0b53feaf686938af82bcddcd5f
Former-commit-id: 4a844058

Former-commit-id: e3615e10a4e9e26fd3c58c1db0895f12f7e544a4 [formerly f59c09f43175fa9df0db429da5e23c650ab1cb40]
Former-commit-id: d3e7868ecff14ab3eb1e72c605dd4e3a40bb31e9
Former-commit-id: 5e726b50

Former-commit-id: 5c9853d87d66862811f70aaa49a0a010b9f876a4 [formerly 979969b5180f9294e515977394f416debcd6fbca]
Former-commit-id: 237cf029f4259f2a445a24e1a9544e7de6029203
Former-commit-id: 37449aa9

I'd inadvertently added 0.5+d to the thickness of the dovetail clip for
the objective.  That made it hard to clip in, and caused trouble when it
broke, as it often did.  The new, thinner bottom should be stretchier
and easier to snip off if desired.  Need to recompile the STL


Former-commit-id: d24e4cb2d818f6d2939ec7c31072d783ede38d02 [formerly 08bdb968db6f8ca238cc5b7fff314c61c924a456]
Former-commit-id: 92791c45440b9167f8f45c9cfe4e8433fdeda35e
Former-commit-id: fa2cd80f

Former-commit-id: f7dfd73cb348df58b17bee9bb3c2f1ef12c8d6d2 [formerly d56824700873fbced91cf2f192be171e72f4100d]
Former-commit-id: ade56922f11ee1fa38ddd0e502f2fd3ff4081bf3
Former-commit-id: 5130fcc9

Former-commit-id: a0cbb1b5ecb57eec55d413f60de78e6c0fedaf55 [formerly c03f94c94a8bf2b26f5b436f7b666c166aa2263d]
Former-commit-id: 6fc980763fd10f0c9bfacbfa76129f611800fde7
Former-commit-id: efae10a1

Former-commit-id: 28fbbf052e02aa4139b4de10cdbdd62ab6137456 [formerly d809d8c4848010eb105b194851f8de550e44da9e]
Former-commit-id: 7bf51a43e4a0a487759ef8aa2a0fe006fedd5a4b
Former-commit-id: 8a233edc

Former-commit-id: 00c2e3a703e63708edddfb0ebc00c0964c3937d4 [formerly e18baa605282a515dfefb7ec8b17b09c54bc91d7]
Former-commit-id: e05ec53eb5986ebd9fcd698ceb3014ff7873daa0
Former-commit-id: b706eb57

Also now able to cater for 5mm LEDs better


Former-commit-id: 276dcdd433b4120feec9567634424e8bf616568b [formerly 5d46bbc958fbf29c2955b0da8b63fdb22669231c]
Former-commit-id: 57f5f6279497888c06d14b171d19df36f8b16844
Former-commit-id: 803a6c54

at the top of the file, the variable led_r did not, as labeled, change
the diameter of the LED holder. Also, while labeled ‘r’ it actually
required a diameter-based input.

I changed the variable to led_d and inserted it into the equations on
lines 93 and 94.


Former-commit-id: cedd3aa709b7bba48145f8515a480a8d6b18a5cd [formerly 8e11f01e634dad1a4ceefe077ebe4a0fdc0accfb]
Former-commit-id: 4ee238e04a67dbefcbaf35f5a58ab4e7d14d3288
Former-commit-id: 2aa9a992

fixed parametric functions for LED size in illumination_and_rear_foot.scad

Former-commit-id: 3cc9558b8437a1e68cec8b7bf43f52b88315ed73 [formerly 64ba1cef9185a554f48719b168d48972020d8f0d]
Former-commit-id: 331dea4ca34ab72a4244304dc5215d1eedce03d9
Former-commit-id: 0b73651d

I can nicely mount a 5mm LED - but annoyingly it seems that I've
inadvertently imaged the emitter onto the camera.  Need to either shift
it axially or roughen the end of the LED to diffuse the light.


Former-commit-id: f08aac65fd2e8e272907fd05509dc77aa60ed395 [formerly 56e94104ff1f32e373edb85b5c5ee8fe9db7e7a0]
Former-commit-id: 6838c5ef4b7b8cce29772bdbf6c293cf22ba4685
Former-commit-id: 200293bd

Former-commit-id: 3c8d7dfedfb45f56f0e994471d83122e8656badd [formerly 677c03c3924b71ff5e4fcd9b96b769f85c41f909]
Former-commit-id: cf01d211311fb55ba3bba530412d2a2b3c35cb38
Former-commit-id: 6baa4f2e

# Conflicts:
#	openscad/illumination_and_rear_foot.scad


Former-commit-id: ef18a82d5fb3080779e4caa44063c9d3ddc4d85c [formerly ddfb7e586ab85cc53567833fcc38216b9365f46e]
Former-commit-id: b4968f421bc2c8f1c848652d8559d2b997017d2e
Former-commit-id: a2c1940b

Former-commit-id: a4cf38f8e0d6c68790f8fdbbdf38c38468013287 [formerly 7b63f8d9ff7e5d84a433fdb88f84abbda05c5d2d]
Former-commit-id: be31b4d3646f30ad4e9abf14e01efd6fe8062995
Former-commit-id: 847c8fff

Split the camera mounts more neatly.  It works currently for picamera2
and usbcam - need to do logitech soon.


Former-commit-id: 03cc7ccc0b61186ca5d8f9eb7344bc9807417215 [formerly 78738161b21e281d384d23b32498db5bd3d57154]
Former-commit-id: ff893d04bbcf9ae5ef38d90586d98156f52cdac9
Former-commit-id: c851da10

Former-commit-id: bb1ea8ffdc46e2a4e4acce28e4fa2bf96eed221c [formerly 4e1edd3b2937bbedb041d04e78e662907325a0ff]
Former-commit-id: 629ea5a68a51f5b9759e957a543d47299249b294
Former-commit-id: b8097ef9

Worked with Paul to get the basis of a baseplate together.  Hopefully
it'll be finished soon...


Former-commit-id: 16de98bfa6f923b6a39bf14adbd640c141025afe [formerly b16d88035f52421adeb6a2b7209545d4eafcd20c]
Former-commit-id: 878b2373b94afdbe6e06c76f59697e1dde543939
Former-commit-id: 523e51f3

Former-commit-id: de659f567468277dc3777ef1ff1f8b2a33acecf0 [formerly 3e1af3476e0b2cf11f2b4f1f5e972edbae3ecd65]
Former-commit-id: 7f201c28929a534661eba4e5ff0969fcfb466b6e
Former-commit-id: ee0e0b11

Former-commit-id: 035a4176e9ad4b36a22dbc03687b39ed401984c8 [formerly ef18da449a52c7f2f5e4ecf57b7f3e4155648e52]
Former-commit-id: b81c1e1610ee90352c26279e13c55337d86f66ac
Former-commit-id: 69dd9491

With everything in the "perfect" position, the condenser seemed to be
about 2mm too far towards the Z nut.  I've shifted it back, but I'm
worried that's a tolerance issue rather than a static shift...


Former-commit-id: 868f3dd5f9a8b008b756a6e4e2d285765effb4f4 [formerly 1cf1d4dc79fd138f2949d67c97ce738503dbe5f8]
Former-commit-id: 1c5df89f3ba7a539a67ef4ea0a99c280c1e4798e
Former-commit-id: db92ff87

Former-commit-id: b637b2a263c5500b2601f1c1473349355ad167df [formerly 21ea46f65445f43abdc190a8091d355a5af9ccde]
Former-commit-id: dcb46d23e46c52f6c0ac90c346c35f42ec4c0daf
Former-commit-id: ea8491ed

Former-commit-id: b26fbe21723696d29b6cb783a5ae3809f5bee3d4 [formerly 9ee19cb33febabf075115f3137921f7736dd0056]
Former-commit-id: f93a1a62113ee19c07107d401605791143835877
Former-commit-id: 3cc39780

Former-commit-id: 9484f178cc2101a2397181d9467b8963a636b253 [formerly 2541047f40148c98c0a95351dcd441a5e2a417ce]
Former-commit-id: da02bec0bb2ab20c2b2b53bf0847df501b549dd0
Former-commit-id: ad9f65d3

Slides can now be freely positioned along their long axis.  The
retaining clip now requires a spring (around 4mm diameter, 10mm length)
to hold it closed.


Former-commit-id: 2cfec417b1a72a597d7c305a0c8ec5bd0601ee37 [formerly 30df62ee98bc04fdefc8ea903e803055b1f1763b]
Former-commit-id: a73e2d2824f9bc239652932a2ea96ff94b1f32b8
Former-commit-id: 2655f956

Former-commit-id: 1e69668eeae22c970d0b67064ad0f66378257a30 [formerly ff9311443fe2c896a9772fec30fb68c0b2e48f2d]
Former-commit-id: fde7c7690f055774e704c9d9e456c010b60625bd
Former-commit-id: b67fb222

Former-commit-id: 45d87aad449ad2417da1f77d54cce58e86e84f63 [formerly ee410de1383cff0495a4f6a800d94a9e5bd57f55]
Former-commit-id: 6e612b3fd4fe2ea7907f26e28fb3adb5ab4b4c54
Former-commit-id: b9b645e1

Former-commit-id: 38259360bf0d8aedc16f75799119ddddaded3bca [formerly 5e936394cbf998f5bd5c58837667c3710a7a3ccd]
Former-commit-id: 84748d02e353d516c3e7801bc19301c5537f2264
Former-commit-id: b27d2148

Former-commit-id: 2f1d6a5e7c2d1a3ad6a58ce3b4e9872e80a924ca [formerly b600b21ee702996208912c0a3b9dde068d634257]
Former-commit-id: 27f241d56b81bbc7f3c1e33c226dd893a1e7fe3f
Former-commit-id: a559739b

A nice comparison graphic showing a typical microscope eyepiece view,
plus the OpenFlexure microscope FoV for the same objective.


Former-commit-id: bd76066aaa88d1636c0998c270b654bfea1ba7b3 [formerly 838846154048ed2c9264b9120f870bb8f47e58ce]
Former-commit-id: 13bf5d749cc667a0c3ad7a2a60977df63f519f74
Former-commit-id: 7b9900be

Former-commit-id: c99b7dddb2496f148c2e4718c47ebb1ee9a0e253 [formerly 6e482b53519b9397fad92ffb02b5e499cf3efac9]
Former-commit-id: 99e65de91e0503d4d41c0ca2970e7f4f7d8c271f
Former-commit-id: 49f32f5e

Former-commit-id: 60aa66accedec898c11a8c77336d983355b8809b [formerly 2c67076e60fda07613bdb86d5d92a0503728c97e]
Former-commit-id: 88c4d7b2ae3e2efcb9236e05b6c150d8c57ee878
Former-commit-id: 62278ad1

The microscope now uses the newer actuator columns from the block stage;
these have push-stick band insertion, and side entry nut traps.  They
should be a lot better.


Former-commit-id: fa0485c30a828acd700e52df3e986c0091e615d6 [formerly fe4651babdf1271c9a5b8c23cfe10549a3bec346]
Former-commit-id: 1ec407593cdd3cb7f63e38ff93662282c6ba78c0
Former-commit-id: e3b003d2

The feet and insertion tool are now up-to-date with the new design of
actuator columns.


Former-commit-id: 877a1b3d7110a79f50d5fa19b73ce97069cdba9f [formerly 6c564610a3a5cd0bd906c4ad4a28129340ff3024]
Former-commit-id: 6f3307066a95d8bcddcf77f04234b99937f94f7c
Former-commit-id: 2debedb0

Former-commit-id: 42f389c4983028e29abe3e96ed9e0214a7ecfa7e [formerly 3b51e6f7aaf9033398deb3d99221287150b12691]
Former-commit-id: ef91c0e6d100b6e29591e5dc89629e2dfba4df2e
Former-commit-id: 115aec21

Tweaks to geometry of the actuator column, to make the nut fit more
snugly and make the hooks for elastic bands stronger.


Former-commit-id: da4d6768d71b69eafdb9a40eb18937f1cdc6423a [formerly 6c63c5a0a5d145cd336bb44c96eeff0c0397e1a3]
Former-commit-id: a3260e6abb694238206a0230ae0937caa5b7c403
Former-commit-id: fc8ac84a

Added a new (untested) optics module for the pi lens, using a
"trylinder" gripper to avoid tape.  Also fixed a bug introduced by
fluorescence that caused non-fluorescence optics modules to fail.


Former-commit-id: 62ef777d8674c8e84c9a33fb88444db86b775239 [formerly b6a083d6d30f0d70e9d132ca2b903fccd846c9b9]
Former-commit-id: 88afaa01adc72cd1578eb63c7018fcab0a40ff04
Former-commit-id: 3932bf2c

Needs more testing - but this seems to grip the pi lens v2 much better


Former-commit-id: c550a7f074442d5d3fe9d8802d2c8363c9d33167 [formerly 8ab4d1f41a8dac5763c8f2dc5758c8c9341a125d]
Former-commit-id: 72b20e9d15e4dc95f19885edad1174ca95108f61
Former-commit-id: 08dc1641

The feet now have a continuous elliptical perimeter, which should help
them stick much better.  Where needed, it should be snapped with a
screwdriver/craft knife/other tool.


Former-commit-id: a8edaec7c95aad1e964a9d281bc843e49407228d [formerly cc2a36b35c962c824b847340051cf68cff5d5149]
Former-commit-id: 75ba0a246d1820eadcbbeaaad807ea4265cb7849
Former-commit-id: 5c6bb8ca

The bottom of the feet is a simple shape - an oval outline with a
section filled in in the middle.  This should have a break for the
elastic band, but it's missing on the tilted feet; I've now fixed this.


Former-commit-id: d5f3525f3b908b502e93f2fde98bd2ad5ff12c69 [formerly e9bb98e7689cc5884404060d0bff946c0df4a5e8]
Former-commit-id: d922ae0ede531d78ce5f6e416c55d2dba826d690
Former-commit-id: 25499ea1

By introducing nut_w I screwed up the feet... now fixed.


Former-commit-id: 31df02edcd056d698b076aaa31391973334b3033 [formerly 622d3d62f26148c2f3cd8cdec2ae868a63222570]
Former-commit-id: fffcf05a801c868fbcbebd5c16be6f8781988d1c
Former-commit-id: 80a81f35

Former-commit-id: 57a2fc0eb33a9142832efcef0d32b0b793ebe8b7 [formerly 8e671b34a38159781f08c38770e020861c4b297e]
Former-commit-id: 84f62746229a2a95e3af739e2119e0fda5c2efe2
Former-commit-id: 45621737

it's too tight now!!


Former-commit-id: ad2b2737adf611cb7de8c97f0d5561da9d160f66 [formerly ad594d5b8e845c7cd4359b767962af2a01ac68c6]
Former-commit-id: c37b488658541c4e99998f516f306b4f80ae19cf
Former-commit-id: c6400e81

Theoretically, the nut slot should be 5.5*1.15mm, i.e. 6.3mm.  I've
tweaked this down (unusual) to 0.97 of the nominal value.  I've not
printed it to test if that's ok.


Former-commit-id: b9e61b93b70ea203ceeeb1667a0c07e3e5d3edcb [formerly 44086b0370c1e7645db4331791815b8d75c381b9]
Former-commit-id: bc6ea5462f5594d98f7be0897f8e5b9a2f46afc1
Former-commit-id: e2c25be0

Former-commit-id: c064b2e6e360e290922d2c51749c342d6d1cf7ae [formerly 721a61d61f4eb6a2eb1477b2417aad5d58636f85]
Former-commit-id: 363f1af4728b862458ac868a3bc13850cd982269
Former-commit-id: 74683eba

oops, forgot to press save on the SCAD file before last commit...  This
adds a test piece for the nut slot width.  I'll print it on a bunch of
printers and check which slot works...


Former-commit-id: 3602232b97798fbdf1b4060e6541efab28bbf16e [formerly dc62f2542854518b81ff72e8d7bdccbdc497d36f]
Former-commit-id: 4e600a671cdae5277a21ff05da53b0e2558bd156
Former-commit-id: 0c583559

The Logitech C270 camera has been supported for a while, but only using
either a Raspberry Pi lens or an objective lens.  This adds an option to
use its stock lens.  Not tested resolution yet.


Former-commit-id: 77e00bdfe7596f3f8d0b31db136a1c3205fe7750 [formerly 02040ce3f5dcc14158c407d06029dbb107fec19c]
Former-commit-id: 56025745d5c52fea3eec1cf826e1dd6991bc534f
Former-commit-id: ea0a1b69

The mounting holes for the C270 now have chamfered bottoms (helps with
overextruded prints) and the one at the end of the camera is moved out
by 0.5mm to match the hole position better on the PCB.


Former-commit-id: cf6890cccd71e49e33937228050e180794d98955 [formerly 958ebd02f0b7fae356e369d3392de06711d5f5fb]
Former-commit-id: 22912313dba876e58222b6d0c1228d4295b20790
Former-commit-id: 86ac320e

The test nut seats are now labelled with sizes (scale factor - 1)*100,
so % change from nominal size.


Former-commit-id: 3273794aa944339d104db9766eeb132df5bea679 [formerly 3a750ada01af6285a2edf1f6806e78b4940a16a9]
Former-commit-id: 62efbd7c86c8770168534d9cb1882df4e2133ed2
Former-commit-id: d08e4d46

Former-commit-id: 6b3ca087c6a4ea6a3a768fdb8e83ae17d96ab3e6 [formerly f9db8eb68b7e034b604085fbdfec04265eb235c8]
Former-commit-id: d0275d932548667b5c37bb13cd2de50e87709903
Former-commit-id: 4a2ec567

Former-commit-id: a9ba72a70868c585c56339fa1e7e34f8d24a991d [formerly 95d0e73432523d15a3f898cacf0db8e698742731]
Former-commit-id: ec882b0e108fc49edb23fd466de2991ebe28b022
Former-commit-id: 184e5fa9

Split nut and band tools into two separate tools, which can now also be
used to pull nut/screw into their seats without destroying the
threads...


Former-commit-id: 56245c799b95db05afa3211f4b05eb71cbf6f4d8 [formerly d4235df405e3ecfb2c2fd28b8dc73996fba96dae]
Former-commit-id: 4cc7c8bb08e45f85bd63cbbb73e7c00350a08153
Former-commit-id: edef7be7

I've now added corner relief for the nut insertion tool, which should
help to put the nut in straight.


Former-commit-id: b83b789d638a33a20e69365197444cb119a5bc78 [formerly 8c7591198bbae23381f3bac899e4516b61960907]
Former-commit-id: d6a1e7ba9121f3120d20f3adb591ac4246865b78
Former-commit-id: d52b49e9

I previously shortened the screw shaft inside the column - unfortunately
I shortened it too much.  I've now made it longer, but tapered the end
for strength.  The STL files are not updated so I deleted them.


Former-commit-id: 12995df74aadff23e745c3e8844cf8361214c802 [formerly c3ab202e25948c0f651b23e292d420d53c913efd]
Former-commit-id: f5ba81cda03ae38a37c4805cacac115ea976a97c
Former-commit-id: d319792e

Former-commit-id: bb7c557fabe98bfb7aa773fcbbe2c88d953e5896 [formerly 20215415278e18423e2da14c523743121d21cb54]
Former-commit-id: c4e7416cd371a19d4d91b48ea2849ef187b79503
Former-commit-id: 87372a8f

Former-commit-id: cfff9084ddb6ede93e45c52bbe18caa378a31bff [formerly c4c213fdee5c7661f933028bf69b76cc6fa7e597]
Former-commit-id: da4ca7b91024a85482f9f8d7d2d7ff28b5e2a466
Former-commit-id: 2473d795

Former-commit-id: b52de0d75b443e0dfc779590c7fa315378573427 [formerly bd52a09d72fc3e781c6084653e004f81a55ba9e3]
Former-commit-id: d393ab4aa0ffc9824a6ae51caac88d8b9de683b0
Former-commit-id: dc3ba013

The flexure bridges that support the stage were failing - turns out I
hadn't quite joined them on properly.  This is now fixed.


Former-commit-id: 47d1beb61600712b8a23488d46725450762a8659 [formerly 3062b2917b924aff4c4ce79417ec6895c5c260e6]
Former-commit-id: 03242e5ebdcf44cfff76b2ffaa6c718b0ce4fa6a
Former-commit-id: da10936c

Former-commit-id: 6e8349832d2edc8b9288c27447204003ae4915f5 [formerly eeb2e204ec6ce51d956cf37b997e7c3062436494]
Former-commit-id: 1d127b204e36189566ebbd9e5649f5acf9ddcb9f
Former-commit-id: 725ec8b8

The tool is now stronger and narrower - but it still doesn't fit through
the foot very well, and I still managed to knock off one of the lugs
from the band hook on the actuator column.


Former-commit-id: 04b72e785e2c8c400e0ed0d5387ee9ae2ba96673 [formerly 0922467982cb04df63adbc89c668c7b80042cd38]
Former-commit-id: 3cc2283ac73e8d261c499a9aa4044b7ab04ccd6a
Former-commit-id: 38fda754

Former-commit-id: c80e99f045042cfaa12eb5d4ce80449960482474 [formerly 38f3f0755274fc01b83a3741d7d403a707e38210]
Former-commit-id: 0a76c06f1b59fbd49d08faeb8c31610f8d887332
Former-commit-id: f6c3f215

Former-commit-id: aacbbf98df9ad62f48b99debbd128b56df7258a6 [formerly 72697e39c1362b37f5ed5f78ba49aef91b8529d5]
Former-commit-id: ad9d9b2641ab5c463ecdd0cef6329647cafc2bf9
Former-commit-id: f2d0ee33

Former-commit-id: 311122421dcc1fce09d056d9eeed8be888de857d [formerly 2c4e3e3cfb8eb6e36f32b155ce0ad26804339c97]
Former-commit-id: e8ad326a4f5b3c0b88ce8ed3032c1b8dc5b156b3
Former-commit-id: 7e326f05

Former-commit-id: dc33a2d6d81164a2740b88c027e9f43a8a2331bb [formerly c6a1510d47256ecfec382561559ff1565cc6fdbd]
Former-commit-id: 201449395307e30df67f6b5f178775ba4ea6f109
Former-commit-id: 50dbf326

Former-commit-id: 32643e08d1f0345bb97b62d55b58f4d315e96302 [formerly ee8dd8917eef5cbec46f593fc779689920cd13c7]
Former-commit-id: 72f4b22846cae07a0955374a866b6ed85a893819
Former-commit-id: f0c4425a

This must have been lost somewhere as I'm sure I did it before.  Maybe
it's lurking un-synced on my mac...  I've strengthened the elastic band
hooks, and made the insertion tool a bit deeper.  I've also widened the
gap in the feet to make it easier to put the bands in, and slimmed down
the shaft on the insertion tool.


Former-commit-id: 53ec1e06a3e575a71d6e5a8f6a1b47fab1c0da5f [formerly 8ae5f7218d5d3dc23c35d554176af4181efaa46e]
Former-commit-id: 2800b0cd52bd5df9159336cdf915d2f74a999da2
Former-commit-id: c5ae5b19

Former-commit-id: 8638f1f3fab518192976101227fdb4fd4cd79423 [formerly a4af5cb08c11ed293ec70699ba6a26037bec8983]
Former-commit-id: 0cd508070f1189e0ed1a1c150ff1baaf097e5d21
Former-commit-id: 0203110e

I think this is now ready :)  I can insert o-rings or doubled 3mm #32
elastic bands pretty reliably, and the hooks Did Not Break.  I think I
made changes like this earlier, but they must have been lost
somewhere...


Former-commit-id: 5b7d0f024ae74e555b00cda9e9204d197ccf194f [formerly 5114f1c3a7792259a4eb551bf0422af21c203444]
Former-commit-id: e958749cc1de44b1bc19ad9fe453b43d85dcda0a
Former-commit-id: 9cfb441c

Former-commit-id: 062059ab69d3c189fa3a46cccad1e30c362d4d15 [formerly 958f918855ceea564c87cd6df290ba640397a01a]
Former-commit-id: 0a4929517bcc4cca7708eaf249f9879c623b10d4
Former-commit-id: 4a1edf4a

There's now a batch file that recompiles the main body 4x with the
standard options.  Not pretty, but Python seems to have errors when it
calls openscad :(


Former-commit-id: b54857eb8a079690b116f0a61da7e58f3e6b758c [formerly 50f36b671f1347d65bb4888cba6aa0ada7ba71f3]
Former-commit-id: f2df2c2c4842aba5b166cab34c525d998d92dd8c
Former-commit-id: d9a783df

The objective clip was being knocked during printing - #16.  This update
now adds small linkers (like those in the actuator columns) to stabilise
it.  They can be snapped easily after printing.


Former-commit-id: c747e377bbbf9e3dac0192a8c544b1f38490762a [formerly dc0e977a8214f9398214a05e74619e4c5bb0e066]
Former-commit-id: 9e6246b6aebb345a2bfd1d5775be257e9de540a5
Former-commit-id: 157b8b06

The picamera v2 now comes with a thicker sticky pad between the camera
and the PCB.  I've made the cavity taller to allow for this.


Former-commit-id: 0b10919fefd9ed669ee7347afafa6a00a784661f [formerly 67a6c51afdc2e94318fa83b3e296825a2a47b680]
Former-commit-id: c742151fae0e3937ed0bb799c53ec8c436ef0841
Former-commit-id: e85c3910

Former-commit-id: 0d4164509fa89b2d9710ef09dff3006c71c0bc85 [formerly 4483e4f907bd5ed036e3de78dc6aa81224509c45]
Former-commit-id: 43afaa1d00696e7c027fdd166320d6c172afe1fc
Former-commit-id: 1318ab43

I've put the adjustment in a slip plate now; needs less hardware, and
probably prints better.  It also comes off for transport.  Only downside
is it relies on the clip staying good; maybe I could add a screw in case
the clip gets loose.


Former-commit-id: 8fc4fe9d5d3f3dcb716eb38bc0b03da382c5d9d4 [formerly fcfa538c0bfd4e0ba7d7b2efabb9cd3d9a95b54a]
Former-commit-id: d6c50be3c9f59ad198ace672d31f928e4d47bb0c
Former-commit-id: 8f06ed31

Former-commit-id: 8b96ca0b000a46960d5fa0c2b45a9a4e48f08aa0 [formerly 50be7c2cb41a20c8f7e930648d54be8acb81f75e]
Former-commit-id: ea0801295437d3322d601d1da88294525f4db876
Former-commit-id: 9f60e2ad

Using a feathered hole for the LED allows a tight fit with tolerance for
slightly off-size LEDs.


Former-commit-id: e535300820b1431aafe500a0fd8d70e7d6ca3752 [formerly b9fe04a08a3015f6becaa8b8747f4363505c9dd2]
Former-commit-id: be7c27d9f58b24a8e8205c17531c55b507351391
Former-commit-id: d9855c1b

The bottom of the actuator column is thin.  I added an infinitesimal
hole to encourage the slicer to make it more solid - seemed to work.


Former-commit-id: 7646fd49a8696664c4225d31c728d7b5eefb70dd [formerly c604f4faaed5eba4ce218fc41a07e809d78d91bb]
Former-commit-id: 6118797807cfceda47549616f1e883010feeb1c3
Former-commit-id: 4ac78f69

Former-commit-id: 79f7575438216f4af06a4990a5bfe71eec8759b6 [formerly c88de7ca22911867c43356dd83330ee616104eab]
Former-commit-id: 74c304b4b785e371c3ebe87bd33e0b6a6e4c3944
Former-commit-id: c927de07

Former-commit-id: a8c3099281849d0b0ce125753c0e02db5afb01af [formerly 83fdf04a8d20b27bd9cc72d084684771c3f601f3]
Former-commit-id: 15ab41e7db0057be518c3ba0c0c869bffd92aa20
Former-commit-id: a6b49fa4

Former-commit-id: 95e95164624508f1bd138068f36b298d7412bd5e [formerly 42690ec5a3c659ef330e54b629f0cd63da08947e]
Former-commit-id: bf33ece9ba1f59d0f606c3d0f2d7a0c4568a3a82
Former-commit-id: be9c617f

Former-commit-id: 19d00f11ac2f49a0988a3e25219dd68d7722f075 [formerly ed79177ee3c009738631a326ba0494248b8e5f0a]
Former-commit-id: e251d3bbd7e0ad9bb3b673833b2ae0c10ebb2038
Former-commit-id: c0e90a79

There are still some rough edges in the BOM, and some images of v5.15 -
I hope these aren't critical, but I should update it soonish...


Former-commit-id: 11236543819ba3ce3990746a84cc1c89b1f76c5e [formerly 12079038ebb2849441120ef55355517c99a9f9d3]
Former-commit-id: f441e05d4e98cf62339515ad3a19d90b30d13cd8
Former-commit-id: 858f7a85