Windows client adds the wrong gateway

I have installed openconnect together with the openconnect-gui for Windows 10.
Using protocol GP and split-tunneling on the gateway. Everything works as expected. However routes is getting added with the wrong gateway.

The client gets and IP address and this information:

2021-08-30 22:53:21 | 4e34 | Internal Address: 100.94.150.6  
2021-08-30 22:53:21 | 4e34 | Internal Gateway: 100.94.150.7 <- seems wrong to me?  

Routes is being added with the wrong gateway:

2021-08-30 22:53:21 | 4e34 | <<-- [EXEC] route add 192.168.0.0 mask 255.255.0.0 100.94.150.7  
2021-08-30 22:53:21 | 4e34 |  OK!

C:\WINDOWS\system32>route print 192.168.0.0

IPv4 Route Table

Active Routes:  
Network Destination        Netmask          Gateway       Interface  Metric  
      192.168.0.0      255.255.0.0     100.94.150.7   192.168.11.126     26  

Regards

-John