Commit 41166757 authored by Thomas Pryds's avatar Thomas Pryds

Added details about slide switch + corrected typo

parent 58c58ba9
Pipeline #199904346 passed with stage
in 48 seconds
......@@ -41,7 +41,8 @@ If you only bought the board, or you had it printed yourself, you will need to g
Alternatively, get a cable w/plug from a broken and non-salvageable Atari/Commodore joystick, or even from
a new reproduction Amiga/Atari joystick.</li>
<li><b>2-position right angle slide switch</b>, 5 pins, 3 mm pin pitch. These should come cheaply
<li><b>2-position right angle slide switch</b>, SPDT On-On, 3 pins (or 5 pins with two shielding pins),
2 mm pin pitch, min 5 mm knob height. These should come cheaply
from your local electronics store or even from EBay.</li>
<li>Basic <b>soldering skills</b> and tools/equipment. These do not come with the kit! ☺</li>
......@@ -130,6 +131,8 @@ are required, as well as some equipment such as a soldering iron, wire strippers
<p>Good luck with your new NES controller for your Commodore / Atari retro computer (or compatible)!</p>
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment