User-Manual/Menus/Detailed-Control-Menu.md

@@ -4,8 +4,9 @@ The detailed control menu allows the operation of the heater to be monitored in
 Here the actual pump speed, fan RPM, heat exchanger temperature and glow plug activity can be observed.
 
 The heater can be turned on or off by holding the Centre keypad button.  
-The desired temperature, or fixed heat demand can be altered by pressing the Up / Down keys.
-If in thermostat mode, the desired value is placed as a small triangle to the left of the measured "temperature bulb" on the left hand side of the screen.
+The desired temperature, or fixed heat demand can be altered by pressing the Up / Down keys.  
+
+If in thermostat mode, the desired value is placed as a small triangle to the left of the measured "temperature bulb" on the left hand side of the screen.  
 The actual temperature is shown below the bulb.
 
 Once started, the desired setting is reported beneath the "target" icon, as degC or Hz, depending upon thermostat or fixed demand modes.