1. 23 Nov, 2018 1 commit
  2. 30 Jul, 2018 1 commit
  3. 18 Jul, 2018 6 commits
    • Patrick Dohmen's avatar
      Connect waterfall sink in front of filter · 0064bc83
      Patrick Dohmen authored
      Connecting the waterfall sink behind the FFT Filter causes the
      waterfall to show only the filtered APT signal. Fixing this needs
      an additional resampler.
    • Patrick Dohmen's avatar
      Fix NOAA APT waterfall bandwidth · e831d815
      Patrick Dohmen authored
      The flowgraph for decoding NOAA APT images generates a waterfall with a
      bandwidth depending on the default samplerate of the SDR hardware.
      USRPB200 defaults to 500 ksps, which produces an output of 125 ksps
      after the "first_stage_decimation" which is fixed to a value of 4.
      Changing the hardware to an "rtlsdr" also changes the default
      samplerate to 1 Msps which results in a waterfall bandwidth of 250 kHz
      (+- 125 kHz). Connecting the waterfall sink behind the FFT Filter,
      which has a decimation set to match an output samplerate of 125 kHz,
      seems to be correct! This produces waterfalls with a bandwidth of
      125 kHz (+- 62,5 kHz).
      Fixes issue #128
    • Manolis Surligas's avatar
      Tune CW parameters · 6b1e3d38
      Manolis Surligas authored
      * Set the loop bandwith of the PLL to a lower value, to get rid off the
      DC leakage and improve SNR
      * Set the AGC update rate to a higher value
      * Decrease the CW decoding threshold
    • Manolis Surligas's avatar
      Fix CW decoder · 85219e5d
      Manolis Surligas authored
      * Fix CW decoder
      * Link with boost chrono to avoid a linking error in boost 1.67
    • Patrick Dohmen's avatar
      Improve sensitivity · dbfb6e65
      Patrick Dohmen authored
    • Patrick Dohmen's avatar
      Add a BPSK decoder Script · 9d41d898
      Patrick Dohmen authored
      Add a BPSK decoder script for frames transmitted in AX.25, using G3RUH
      scrambling and without. Baudrate is set via parameter "baudrate", all
      filters, taps, offsets, etc are calculated using this parameter. Decoder
      tested with 1k2 bps and 9k6 bps.
  4. 27 Apr, 2018 1 commit
  5. 25 Mar, 2018 3 commits
  6. 24 Mar, 2018 3 commits
  7. 20 Mar, 2018 1 commit
  8. 23 Feb, 2018 2 commits
  9. 08 Feb, 2018 1 commit
  10. 02 Feb, 2018 1 commit
  11. 19 Jan, 2018 1 commit
  12. 11 Jan, 2018 1 commit
    • Manolis Surligas's avatar
      Fix METEOR flowgraph · 22cb5e18
      Manolis Surligas authored
      * Set the METEOR flowgraph in non-X mode
      * Reduce the stored bandwidth by a factor of 2. Captures have shown that
      twice the bandwidth of the METEOR is enough for RRC and clock recovery
  13. 10 Jan, 2018 2 commits
  14. 05 Jan, 2018 1 commit
  15. 09 Dec, 2017 1 commit
    • Manolis Surligas's avatar
      Remove .txt decoded frames files · 3cc611c6
      Manolis Surligas authored
      * Decoded frames are stored only in hex files
      * Output only the CRC valid frames. For now, in order to get the CRC
      failed manual edit of the flowgraph is needed. In the near future, a
      command line arguemnt will enable/disable
  16. 26 Nov, 2017 2 commits
    • Manolis Surligas's avatar
      Fix clock recovery issue on AFSK 1200 decoder · d951fa92
      Manolis Surligas authored
      * Fix clock recovery issue on AFSK 1200 decoder
      * Improve performance of AFSK 1200
      * Make AFSK 1200 decoder to produce waterfall and audio file with the
      same characteristics as the generic FM demodulator flowgraph for a
      unified output experience in the SatNOGS network 
    • Manolis Surligas's avatar
      Add AFSK1200 decoder · 53e0db48
      Manolis Surligas authored
      * AFSK1200 decoder with AX.25 frame support
      * Fix issue with the AX.25 decoder when the frame has only one AX.25
      SYNC flag
      * Fix clear text debug output to print each one of the characters and
      not the string, so that the payload can be partially be printed even if
      it contains non-printable characters
      * Add AFSK1200 decoder example that can decode frames from an .ogg file
      retrieved by the satnogs-network
  17. 19 Nov, 2017 1 commit
  18. 02 Nov, 2017 1 commit
  19. 01 Nov, 2017 5 commits
  20. 06 Oct, 2017 1 commit
    • Corey Shields's avatar
      change settings to parameters · 06436605
      Corey Shields authored
      This change sets all of the expected parameters to the g3ruh script. Without it, satnogsclient will send it paremeters that it does not understand, causing it to exit out.
  21. 30 Sep, 2017 1 commit
  22. 24 Sep, 2017 1 commit
    • Corey Shields's avatar
      fix g3ruh script · 622965da
      Corey Shields authored
      fix the g3ruh script so that it saves captured frames properly in /tmp/.satnogs/data
  23. 21 Sep, 2017 2 commits