MSOP-8_3x3mm_P0.65mm has too narrow clearance
Created by: essele
This MSOP-8 footprint seems to have a pin to pin clearance of approximately 5.8mil, which will cause it to fail DRC checks with a 6mil clearance set.
All of the other MSOP-8's (the EP variants) all have a clearance approaching 10mil which seems a lot more sensible.
(Pins are 0.5mm on this one, and 0.4mm on the EP variants -- most of the datasheets I've looked at suggest between 0.35 and 0.45 ... so 0.4 seems like a good choice.)