Footprint 12BH611-GR: wrong pins
I used 12BH611-GR as a footprint for a Device/Battery.
12BH611-GR, from a top view, having the snap on the right side:
- Pin 1 is used for the negative side (upper)
- Pin 2 is used for the positive side (lower)
But in order to work with Device/Battery, it should be:
- Pin 1: positive side (lower)
- Pin 2: negative side (upper)
I went ahead and changed it in my local copy, and verified that everything worked the way it should after swapping the pin numbers.