Commit 586f22e4 authored by Devon Kearns's avatar Devon Kearns

Pre-build commit

parent 6670b3ed
rtpbreak for Debian
-------------------
<possible notes regarding this package - if none, delete this file>
-- Devon Kearns <dookie@kali.org> Sun, 30 Dec 2012 18:00:10 -0700
rtpbreak for Debian
-------------------
<this file describes information about the source package, see Debian policy
manual section 4.14. You WILL either need to modify or delete this file>
rtpbreak (1.3a-1) unstable; urgency=low
rtpbreak (1.3a-1kali0) kali; urgency=low
* Initial release (Closes: #nnnn) <nnnn is the bug number of your ITP>
* Initial release
-- Devon Kearns <dookie@kali.org> Sun, 30 Dec 2012 18:00:10 -0700
Source: rtpbreak
Section: unknown
Section: utils
Priority: extra
Maintainer: Devon Kearns <dookie@kali.org>
Build-Depends: debhelper (>= 8.0.0)
Build-Depends: debhelper (>= 8.0.0), libpcap-dev, libnet1-dev
Standards-Version: 3.9.3
Homepage: <insert the upstream URL, if relevant>
#Vcs-Git: git://git.debian.org/collab-maint/rtpbreak.git
#Vcs-Browser: http://git.debian.org/?p=collab-maint/rtpbreak.git;a=summary
Homepage: http://dallachiesa.com/code/rtpbreak/
Vcs-Git: ssh://git@git.kali.org/packages/rtpbreak.git
Vcs-Browser: http://git.kali.org/gitweb/?p=packages/rtpbreak.git;a=summary
Package: rtpbreak
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: <insert up to 60 chars description>
<insert long description, indented with spaces>
Depends: ${shlibs:Depends}, ${misc:Depends}, libpcap0.8, libnet1
Description: Detects, reconstructs, and analyzes RTP sessions
With rtpbreak you can detect, reconstruct and analyze any
RTP session. It doesn't require the presence of RTCP
packets and works independently form the used signaling
protocol (SIP, H.323, SCCP, ...). The input is a sequence
of packets, the output is a set of files you can use as
input for other tools (wireshark/tshark, sox, grep/awk/cut/
cat/sed, ...). It supports also wireless (AP_DLT_IEEE802_11)
networks.
Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
Upstream-Name: rtpbreak
Source: <url://example.com>
Source: http://dallachiesa.com/code/rtpbreak/
Files: *
Copyright: <years> <put author's name and email here>
<years> <likewise for another author>
License: <special license>
<Put the license of the package here indented by 1 space>
<This follows the format of Description: lines in control file>
Copyright: 2007-2008 Dallachiesa Michele <michele.dallachiesa@poste.it>
License: GPL-2+
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
.
<Including paragraphs>
This package is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>
.
On Debian systems, the complete text of the GNU General
Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
# If you want to use GPL v2 or later for the /debian/* files use
# the following clauses, or change it to suit. Delete these two lines
Files: debian/*
Copyright: 2012 Devon Kearns <dookie@kali.org>
License: GPL-2+
......@@ -31,8 +39,3 @@ License: GPL-2+
.
On Debian systems, the complete text of the GNU General
Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
# Please also look if there are files or directories which have a
# different copyright/license attached and list them here.
# Please avoid to pick license terms that are more restrictive than the
# packaged work, as it may make Debian's contributions unacceptable upstream.
#! /bin/sh -e
# /usr/lib/emacsen-common/packages/install/rtpbreak
# Written by Jim Van Zandt <jrv@debian.org>, borrowing heavily
# from the install scripts for gettext by Santiago Vila
# <sanvila@ctv.es> and octave by Dirk Eddelbuettel <edd@debian.org>.
FLAVOR=$1
PACKAGE=rtpbreak
if [ ${FLAVOR} = emacs ]; then exit 0; fi
echo install/${PACKAGE}: Handling install for emacsen flavor ${FLAVOR}
#FLAVORTEST=`echo $FLAVOR | cut -c-6`
#if [ ${FLAVORTEST} = xemacs ] ; then
# SITEFLAG="-no-site-file"
#else
# SITEFLAG="--no-site-file"
#fi
FLAGS="${SITEFLAG} -q -batch -l path.el -f batch-byte-compile"
ELDIR=/usr/share/emacs/site-lisp/${PACKAGE}
ELCDIR=/usr/share/${FLAVOR}/site-lisp/${PACKAGE}
ELRELDIR=../../../emacs/site-lisp/${PACKAGE}
# Install-info-altdir does not actually exist.
# Maybe somebody will write it.
if test -x /usr/sbin/install-info-altdir; then
echo install/${PACKAGE}: install Info links for ${FLAVOR}
install-info-altdir --quiet --section "" "" --dirname=${FLAVOR} /usr/share/info/${PACKAGE}.info.gz
fi
install -m 755 -d ${ELCDIR}
cd ${ELDIR}
FILES=`echo *.el`
cd ${ELCDIR}
ln -sf ${ELRELDIR}/*.el .
cat << EOF > path.el
(debian-pkg-add-load-path-item ".")
(setq byte-compile-warnings nil)
EOF
${FLAVOR} ${FLAGS} ${FILES}
rm -f path.el
exit 0
#!/bin/sh -e
# /usr/lib/emacsen-common/packages/remove/rtpbreak
FLAVOR=$1
PACKAGE=rtpbreak
if [ ${FLAVOR} != emacs ]; then
if test -x /usr/sbin/install-info-altdir; then
echo remove/${PACKAGE}: removing Info links for ${FLAVOR}
install-info-altdir --quiet --remove --dirname=${FLAVOR} /usr/share/info/rtpbreak.info.gz
fi
echo remove/${PACKAGE}: purging byte-compiled files for ${FLAVOR}
rm -rf /usr/share/${FLAVOR}/site-lisp/${PACKAGE}
fi
;; -*-emacs-lisp-*-
;;
;; Emacs startup file, e.g. /etc/emacs/site-start.d/50rtpbreak.el
;; for the Debian rtpbreak package
;;
;; Originally contributed by Nils Naumann <naumann@unileoben.ac.at>
;; Modified by Dirk Eddelbuettel <edd@debian.org>
;; Adapted for dh-make by Jim Van Zandt <jrv@debian.org>
;; The rtpbreak package follows the Debian/GNU Linux 'emacsen' policy and
;; byte-compiles its elisp files for each 'emacs flavor' (emacs19,
;; xemacs19, emacs20, xemacs20...). The compiled code is then
;; installed in a subdirectory of the respective site-lisp directory.
;; We have to add this to the load-path:
(let ((package-dir (concat "/usr/share/"
(symbol-name debian-emacs-flavor)
"/site-lisp/rtpbreak")))
;; If package-dir does not exist, the rtpbreak package must have
;; removed but not purged, and we should skip the setup.
(when (file-directory-p package-dir)
(if (fboundp 'debian-pkg-add-load-path-item)
(debian-pkg-add-load-path-item package-dir)
(setq load-path (cons package-dir load-path)))
(autoload 'rtpbreak-mode "rtpbreak-mode"
"Major mode for editing rtpbreak files." t)
(add-to-list 'auto-mode-alist '("\\.rtpbreak$" . rtpbreak-mode))))
#!/bin/sh
### BEGIN INIT INFO
# Provides: rtpbreak
# Required-Start: $network $local_fs
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: <Enter a short description of the software>
# Description: <Enter a long description of the software>
# <...>
# <...>
### END INIT INFO
# Author: Devon Kearns <dookie@kali.org>
# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC=rtpbreak # Introduce a short description here
NAME=rtpbreak # Introduce the short server's name here
DAEMON=/usr/sbin/rtpbreak # Introduce the server's location here
DAEMON_ARGS="" # Arguments to run the daemon with
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
# Exit if the package is not installed
[ -x $DAEMON ] || exit 0
# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME
# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh
# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions
#
# Function that starts the daemon/service
#
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
# Add code here, if necessary, that waits for the process to be ready
# to handle requests from services started subsequently which depend
# on this one. As a last resort, sleep for some time.
}
#
# Function that stops the daemon/service
#
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
# Wait for children to finish too if this is a daemon that forks
# and if the daemon is only ever run from this initscript.
# If the above conditions are not satisfied then add some other code
# that waits for the process to drop all resources that could be
# needed by services started subsequently. A last resort is to
# sleep for some time.
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
[ "$?" = 2 ] && return 2
# Many daemons don't delete their pidfiles when they exit.
rm -f $PIDFILE
return "$RETVAL"
}
#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
#
# If the daemon can reload its configuration without
# restarting (for example, when it is sent a SIGHUP),
# then implement that here.
#
start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
return 0
}
case "$1" in
start)
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
do_start
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
stop)
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
do_stop
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
status)
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
;;
#reload|force-reload)
#
# If do_reload() is not implemented then leave this commented out
# and leave 'force-reload' as an alias for 'restart'.
#
#log_daemon_msg "Reloading $DESC" "$NAME"
#do_reload
#log_end_msg $?
#;;
restart|force-reload)
#
# If the "reload" option is implemented then remove the
# 'force-reload' alias
#
log_daemon_msg "Restarting $DESC" "$NAME"
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0) log_end_msg 0 ;;
1) log_end_msg 1 ;; # Old process is still running
*) log_end_msg 1 ;; # Failed to start
esac
;;
*)
# Failed to stop
log_end_msg 1
;;
esac
;;
*)
#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
exit 3
;;
esac
:
.\" Hey, EMACS: -*- nroff -*-
.\" (C) Copyright 2012 Devon Kearns <dookie@kali.org>,
.\"
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH RTPBREAK SECTION "December 30, 2012"
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
.\" .nh disable hyphenation
.\" .hy enable hyphenation
.\" .ad l left justify
.\" .ad b justify to both left and right margins
.\" .nf disable filling
.\" .fi enable filling
.\" .br insert line break
.\" .sp <n> insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
rtpbreak \- program to do something
.SH SYNOPSIS
.B rtpbreak
.RI [ options ] " files" ...
.br
.B bar
.RI [ options ] " files" ...
.SH DESCRIPTION
This manual page documents briefly the
.B rtpbreak
and
.B bar
commands.
.PP
.\" TeX users may be more comfortable with the \fB<whatever>\fP and
.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
.\" respectively.
\fBrtpbreak\fP is a program that...
.SH OPTIONS
These programs follow the usual GNU command line syntax, with long
options starting with two dashes (`-').
A summary of options is included below.
For a complete description, see the Info files.
.TP
.B \-h, \-\-help
Show summary of options.
.TP
.B \-v, \-\-version
Show version of program.
.SH SEE ALSO
.BR bar (1),
.BR baz (1).
.br
The programs are documented fully by
.IR "The Rise and Fall of a Fooish Bar" ,
available via the Info system.
<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
<!-- Process this file with docbook-to-man to generate an nroff manual
page: `docbook-to-man manpage.sgml > manpage.1'. You may view
the manual page with: `docbook-to-man manpage.sgml | nroff -man |
less'. A typical entry in a Makefile or Makefile.am is:
manpage.1: manpage.sgml
docbook-to-man $< > $@
The docbook-to-man binary is found in the docbook-to-man package.
Please remember that if you create the nroff version in one of the
debian/rules file targets (such as build), you will need to include
docbook-to-man in your Build-Depends control field.
-->
<!-- Fill in your name for FIRSTNAME and SURNAME. -->
<!ENTITY dhfirstname "<firstname>FIRSTNAME</firstname>">
<!ENTITY dhsurname "<surname>SURNAME</surname>">
<!-- Please adjust the date whenever revising the manpage. -->
<!ENTITY dhdate "<date>December 30, 2012</date>">
<!-- SECTION should be 1-8, maybe w/ subsection other parameters are
allowed: see man(7), man(1). -->
<!ENTITY dhsection "<manvolnum>SECTION</manvolnum>">
<!ENTITY dhemail "<email>dookie@kali.org</email>">
<!ENTITY dhusername "Devon Kearns">
<!ENTITY dhucpackage "<refentrytitle>RTPBREAK</refentrytitle>">
<!ENTITY dhpackage "rtpbreak">
<!ENTITY debian "<productname>Debian</productname>">
<!ENTITY gnu "<acronym>GNU</acronym>">
<!ENTITY gpl "&gnu; <acronym>GPL</acronym>">
]>
<refentry>
<refentryinfo>
<address>
&dhemail;
</address>
<author>
&dhfirstname;
&dhsurname;
</author>
<copyright>
<year>2003</year>
<holder>&dhusername;</holder>
</copyright>
&dhdate;
</refentryinfo>
<refmeta>
&dhucpackage;
&dhsection;
</refmeta>
<refnamediv>
<refname>&dhpackage;</refname>
<refpurpose>program to do something</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>&dhpackage;</command>
<arg><option>-e <replaceable>this</replaceable></option></arg>
<arg><option>--example <replaceable>that</replaceable></option></arg>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>DESCRIPTION</title>
<para>This manual page documents briefly the
<command>&dhpackage;</command> and <command>bar</command>
commands.</para>
<para>This manual page was written for the &debian; distribution
because the original program does not have a manual page.
Instead, it has documentation in the &gnu;
<application>Info</application> format; see below.</para>
<para><command>&dhpackage;</command> is a program that...</para>
</refsect1>
<refsect1>
<title>OPTIONS</title>
<para>These programs follow the usual &gnu; command line syntax,
with long options starting with two dashes (`-'). A summary of
options is included below. For a complete description, see the
<application>Info</application> files.</para>
<variablelist>
<varlistentry>
<term><option>-h</option>
<option>--help</option>
</term>
<listitem>
<para>Show summary of options.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-v</option>
<option>--version</option>
</term>
<listitem>
<para>Show version of program.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>SEE ALSO</title>
<para>bar (1), baz (1).</para>
<para>The programs are documented fully by <citetitle>The Rise and
Fall of a Fooish Bar</citetitle> available via the
<application>Info</application> system.</para>
</refsect1>
<refsect1>
<title>AUTHOR</title>
<para>This manual page was written by &dhusername; &dhemail; for
the &debian; system (and may be used by others). Permission is
granted to copy, distribute and/or modify this document under
the terms of the &gnu; General Public License, Version 2 any
later version published by the Free Software Foundation.
</para>
<para>
On Debian systems, the complete text of the GNU General Public
License can be found in /usr/share/common-licenses/GPL.
</para>
</refsect1>
</refentry>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-omittag:t
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:2
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:nil
sgml-exposed-tags:nil
sgml-local-catalogs:nil
sgml-local-ecat-files:nil
End:
-->
This diff is collapsed.
?package(rtpbreak):needs="X11|text|vc|wm" section="Applications/see-menu-manual"\
title="rtpbreak" command="/usr/bin/rtpbreak"
#!/bin/sh
# postinst script for rtpbreak
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <postinst> `configure' <most-recently-configured-version>
# * <old-postinst> `abort-upgrade' <new version>
# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
# <new-version>
# * <postinst> `abort-remove'
# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
# <failed-install-package> <version> `removing'
# <conflicting-package> <version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
case "$1" in
configure)
;;
abort-upgrade|abort-remove|abort-deconfigure)
;;
*)
echo "postinst called with unknown argument \`$1'" >&2
exit 1
;;
esac
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
#DEBHELPER#
exit 0
#!/bin/sh
# postrm script for rtpbreak
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <postrm> `remove'
# * <postrm> `purge'
# * <old-postrm> `upgrade' <new-version>
# * <new-postrm> `failed-upgrade' <old-version>
# * <new-postrm> `abort-install'
# * <new-postrm> `abort-install' <old-version>
# * <new-postrm> `abort-upgrade' <old-version>
# * <disappearer's-postrm> `disappear' <overwriter>
# <overwriter-version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
case "$1" in
purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
;;
*)
echo "postrm called with unknown argument \`$1'" >&2
exit 1
;;
esac
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
#DEBHELPER#
exit 0
#!/bin/sh
# preinst script for rtpbreak
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <new-preinst> `install'
# * <new-preinst> `install' <old-version>
# * <new-preinst> `upgrade' <old-version>
# * <old-preinst> `abort-upgrade' <new-version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
case "$1" in
install|upgrade)
;;
abort-upgrade)
;;
*)
echo "preinst called with unknown argument \`$1'" >&2
exit 1
;;
esac
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
#DEBHELPER#
exit 0
#!/bin/sh
# prerm script for rtpbreak
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <prerm> `remove'
# * <old-prerm> `upgrade' <new-version>
# * <new-prerm> `failed-upgrade' <old-version>
# * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
# * <deconfigured's-prerm> `deconfigure' `in-favour'
# <package-being-installed> <version> `removing'
# <conflicting-package> <version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
case "$1" in
remove|upgrade|deconfigure)
;;
failed-upgrade)
;;
*)
echo "prerm called with unknown argument \`$1'" >&2
exit 1
;;
esac
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
#DEBHELPER#
exit 0
#
# Regular cron jobs for the rtpbreak package
#
0 4 * * * root [ -x /usr/bin/rtpbreak_maintenance ] && /usr/bin/rtpbreak_maintenance
# Defaults for rtpbreak initscript
# sourced by /etc/init.d/rtpbreak
# installed at /etc/default/rtpbreak by the maintainer scripts