Commit 1d5e1b98 authored by Nicolas Dufour's avatar Nicolas Dufour Committed by Nicolas Dufour

[Bug #980527] Gcodetools: Unlocalized messages. Description elements need the...

[Bug #980527] Gcodetools: Unlocalized messages. Description elements need the xml:space=preserve attribute to be translatable.

Fixed bugs:
  - https://launchpad.net/bugs/980527

(bzr r15394)
parent 690cae49
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -8,7 +8,7 @@
<param name='active-tab' type="notebook">
<page name='about' _gui-text='About'>
<_param name="help" type="description">Gcodetools was developed to make simple Gcode from Inkscape's paths. Gcode is a special format which is used in most of CNC machines. So Gcodetools allows you to use Inkscape as CAM program.
<_param name="help" type="description" xml:space="preserve">Gcodetools was developed to make simple Gcode from Inkscape's paths. Gcode is a special format which is used in most of CNC machines. So Gcodetools allows you to use Inkscape as CAM program.
It can be use with a lot of machine types:
Mills
......@@ -22,7 +22,7 @@ To get more info visit developers page at http://www.cnc-club.ru/gcodetools</_pa
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -12,7 +12,7 @@
<param name="area-inkscape-radius" type="float" min="-1000" max="1000" _gui-text="Area width:">-10</param>
<param name="area-tool-overlap" type="float" min="0" max="1" _gui-text="Area tool overlap (0..0.9):">0</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
"Create area offset": creates several Inkscape path offsets to fill original path's area up to "Area radius" value.
Outlines start from "1/2 D" up to "Area width" total width with "D" steps where D is taken from the nearest tool definition ("Tool diameter" value).
......@@ -37,7 +37,7 @@ Only one offset will be created if the "Area width" is equal to "1/2 D".
<_option value="mark with style">mark with style</_option>
<_option value="delete">delete</_option>
</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
Usage:
1. Select all Area Offsets (gray outlines)
2. Object/Ungroup (Shift+Ctrl+G)
......@@ -59,7 +59,7 @@ Suspected small objects will be marked out by colored arrows.
<param name="path-to-gcode-depth-function" type="string" _gui-text="Depth function:">d</param>
<param name="path-to-gcode-sort-paths" type="boolean" _gui-text="Sort paths to reduse rapid distance">True</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
Biarc interpolation tolerance is the maximum distance between path and its approximation.
The segment will be split into two segments if the distance between path's segment and its approximation exceeds biarc interpolation tolerance.
For depth function c=color intensity from 0.0 (white) to 1.0 (black), d is the depth defined by orientation points, s - surface defined by orientation points.
......@@ -103,7 +103,7 @@ For depth function c=color intensity from 0.0 (white) to 1.0 (black), d is the d
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -12,7 +12,7 @@
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -8,7 +8,7 @@
<param name='active-tab' type="notebook">
<page name='dxfpoints' _gui-text='DXF points'>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
Convert selected objects to drill points (as dxf_import plugin does). Also you can save original shape. Only the start point of each curve will be used.
......@@ -49,7 +49,7 @@ Also you can manually select object, open XML editor (Shift+Ctrl+X) and add or r
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -13,7 +13,7 @@
<param name="engraving-newton-iterations" type="int" min="2" max="10" _gui-text="Accuracy factor (2 low to 10 high):">4</param>
<param name="engraving-draw-calculation-paths" type="boolean" _gui-text="Draw additional graphics to see engraving path">false</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
This function creates path to engrave letters or any shape with sharp angles.
Cutter's depth as a function of radius is defined by the tool.
Depth may be any Python expression. For instance:
......@@ -61,7 +61,7 @@ ellipse.(minor axis r, major 4r).....: math.sqrt(max(0,r**2-w**2))*4</_param>
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -37,7 +37,7 @@ different X/Y scale)</_option>
<_item value="G20 (All units in inches)">in</_item>
</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
Orientation points are used to calculate transformation (offset,scale,mirror,rotation in XY plane) of the path.
3-points mode only: do not put all three into one line (use 2-points mode instead).
......@@ -88,7 +88,7 @@ Now press apply to create control points (independent set for each layer).
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -20,7 +20,7 @@
</page>
<page name='lathe_modify_path' _gui-text='Lathe modify path'>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
This function modifies path so it will be able to be cut with the rectangular cutter.
</_param>
<param name="lathe-rectangular-cutter-width" type="float" precision="5" min="0" max="1000" _gui-text="Lathe width:">4</param>
......@@ -39,7 +39,7 @@
<param name="path-to-gcode-depth-function" type="string" _gui-text="Depth function:">d</param>
<param name="path-to-gcode-sort-paths" type="boolean" _gui-text="Sort paths to reduse rapid distance">True</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
Biarc interpolation tolerance is the maximum distance between path and its approximation.
The segment will be split into two segments if the distance between path's segment and its approximation exceeds biarc interpolation tolerance.
For depth function c=color intensity from 0.0 (white) to 1.0 (black), d is the depth defined by orientation points, s - surface defined by orientation points.
......@@ -83,7 +83,7 @@ For depth function c=color intensity from 0.0 (white) to 1.0 (black), d is the d
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -27,7 +27,7 @@ different X/Y scale)</_option>
<_item value="G20 (All units in inches)">in</_item>
</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
Orientation points are used to calculate transformation (offset,scale,mirror,rotation in XY plane) of the path.
3-points mode only: do not put all three into one line (use 2-points mode instead).
......@@ -42,7 +42,7 @@ Now press apply to create control points (independent set for each layer).
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -19,7 +19,7 @@
<param name="path-to-gcode-depth-function" type="string" _gui-text="Depth function:">d</param>
<param name="path-to-gcode-sort-paths" type="boolean" _gui-text="Sort paths to reduse rapid distance">True</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
Biarc interpolation tolerance is the maximum distance between path and its approximation.
The segment will be split into two segments if the distance between path's segment and its approximation exceeds biarc interpolation tolerance.
For depth function c=color intensity from 0.0 (white) to 1.0 (black), d is the depth defined by orientation points, s - surface defined by orientation points.
......@@ -63,7 +63,7 @@ For depth function c=color intensity from 0.0 (white) to 1.0 (black), d is the d
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -30,7 +30,7 @@
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
......@@ -23,7 +23,7 @@
</param>
<_param name="help" type="description">
<_param name="help" type="description" xml:space="preserve">
Selected tool type fills appropriate default values. You can change these values using the Text tool later on.
The topmost (z order) tool in the active layer is used. If there is no tool inside the current layer it is taken from the upper layer.
......@@ -33,7 +33,7 @@ Press Apply to create new tool.
</page>
<page name='help' _gui-text='Help'>
<_param name="fullhelp" type="description">
<_param name="fullhelp" type="description" xml:space="preserve">
Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters.
This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment