Commit e46ed757 authored by Darren 'Tadgy' Austin's avatar Darren 'Tadgy' Austin

Update rc.inet1.conf with IPv6 options.

parent 60e4ae1b
......@@ -44,6 +44,16 @@ DHCP_HOSTNAME[3]=""
# Default gateway IP address:
GATEWAY=""
# IPv6 configuration options:
#IPADDR6[0]=
#PREFIX6[0]=
#IPALIASES6[0]=
#USE_DHCP6[0]=
#USE_AUTOCONF6[0]=
# Default gateway IPv6 address:
#GATEWAY6=""
# Change this to "yes" for debugging output to stdout. Unfortunately,
# /sbin/hotplug seems to disable stdout so you'll only see debugging output
# when rc.inet1 is called directly.
......@@ -106,7 +116,7 @@ DEBUG_ETH_UP="no"
# the default 'eth4'
#IPALIASES[4]="192.168.5.10/24" # Set up an IP alias. A netmask may be given
# with a /<prefix> after the IP address - if
# not supplied, /32 will be used as default.
# not supplied, /24 will be used as default.
#HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address
#MTU[4]="" # The default MTU is 1500, but you might need
# 1360 when you use NAT'ed IPSec traffic.
......@@ -125,6 +135,9 @@ DEBUG_ETH_UP="no"
# server is not found (ipv4ll link-local
# adresses in the IP range 169.254.0.0/16 are
# also known as "zeroconf" addresses)
#AUTOCONF6_TIMEOUT[4]="15" # The default timeout for auto configuration to
# wait for the interface to come up is 15 sec.
# Increase the timeout if required.
#WLAN_ESSID[4]=DARKSTAR # An example of how you can override _any_
# parameter defined in rc.wireless.conf, by
# prepending 'WLAN_' to the parameter's name.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment