GitLab Runner 12.10 release checklist

GitLab Runner Release manager: @tmaczukin

First working day after 7th - v12.10.0-rc1 release

check if Pipeline for master is passing:
- add all required fixes to make master Pipeline passing
git checkout master && git pull in your local working copy!

prepare CHANGELOG entries

make generate_changelog CHANGELOG_RELEASE=v12.10.0-rc1

add v12.10.0-rc1 CHANGELOG entries and commit

git add CHANGELOG.md && \
git commit -m "Update CHANGELOG for v12.10.0-rc1" -S

tag and push v12.10.0-rc1:

git tag -s v12.10.0-rc1 -m "Version v12.10.0-rc1" && \
git push origin v12.10.0-rc1

create and push 12-10-stable branch:

git checkout -b 12-10-stable && \
git push -u origin 12-10-stable

checkout to master, update VERSION file to 13.0.0 and push master:

git checkout master; echo -n "13.0.0" > VERSION && \
git add VERSION && \
git commit -m "Bump version to 13.0.0" -S && \
git push

wait for Pipeline for v12.10.0-rc1 to pass
- add all required fixes to make v12.10.0-rc1 passing

update runner helm chart to use v12.10.0-rc1 version

check if Pipeline for master is passing:
- add all required fixes to make master Pipeline passing
go to your local working copy of https://gitlab.com/gitlab-org/charts/gitlab-runner
git checkout master && git pull in your local working copy!

set Helm Chart to use v12.10.0-rc1 version of GitLab Runner

sed -i".bak" "s/^appVersion: .*/appVersion: 12.10.0-rc1/" Chart.yaml && \
rm Chart.yaml.bak && \
git add Chart.yaml && \
git commit -m "Update used GitLab Runner version to 12.10.0-rc1" -S

bump version of the Helm Chart to 0.16.0-rc1

sed -i".bak" "s/^version: .*/version: 0.16.0-rc1/" Chart.yaml && \
rm Chart.yaml.bak && \
git add Chart.yaml && \
git commit -m "Bump version to 0.16.0-rc1" -S

prepare CHANGELOG entries
```
make generate_changelog CHANGELOG_RELEASE=v0.16.0-rc1
```
- manually add line including GitLab Runner version update information as the first item:
```
- Update GitLab Runner version to 12.10.0-rc1
```

add v0.16.0-rc1 CHANGELOG entries and commit

git add CHANGELOG.md && \
git commit -m "Update CHANGELOG for v0.16.0-rc1" -S

tag and push v0.16.0-rc1:

git tag -s v0.16.0-rc1 -m "Version v0.16.0-rc1" && \
git push origin v0.16.0-rc1

create and push 0-16-0-stable branch:

git checkout -b 0-16-0-stable && \
git push -u origin 0-16-0-stable

checkout to master, bump version of the Helm Chart to 0.17.0-beta, set back the bleeding version of Runner and push master:

git checkout master && \
sed -i".bak" "s/^version: .*/version: 0.17.0-beta/" Chart.yaml && \
rm Chart.yaml.bak && \
sed -i".bak" "s/^appVersion: .*/appVersion: bleeding/" Chart.yaml && \
rm Chart.yaml.bak && \
git add Chart.yaml && \
git commit -m "Bump version to 0.17.0-beta" -S && \
git push

deploy v12.10.0-rc1

Detailed description of Runners deployment for GitLab.com CI fleet can be found in the runbook.

at RC1 release day: to prmX runners

go to your local chef-repo working directory and execute:

knife ssh -afqdn 'roles:gitlab-runner-prm' -- sudo systemctl stop chef-client
knife ssh -afqdn 'roles:gitlab-runner-prm' -- sudo systemctl is-active chef-client
git checkout master && git pull
git checkout -b update-prm-runners-to-12-10-0-rc1

update version

$EDITOR roles/gitlab-runner-prm.json

In the role definition prepare the override_attributes entry. It should be placed at the top of the file:

"override_attributes": {
  "cookbook-gitlab-runner": {
    "gitlab-runner": {
        "repository": "unstable",
        "version": "12.10.0-rc1"
    }
  }
},

git add roles/gitlab-runner-prm.json && git commit -m "Update prmX runners to v12.10.0-rc1"
git push -u origin update-prm-runners-to-12-10-0-rc1
after pushing the branch, create and manage to merge the chef-repo MR
check the apply to staging job if it tries to update only the changed role
start the manual apply to prod job

after the job is finished execute:

knife ssh -C 1 -afqdn 'roles:gitlab-runner-prm' -- sudo /root/runner_upgrade.sh &
time wait

next day (if no problems): to rest of the runners

go to your local chef-repo working directory and execute:

knife ssh -afqdn 'roles:gitlab-runner-gsrm OR roles:gitlab-runner-srm' -- sudo systemctl stop chef-client
knife ssh -afqdn 'roles:gitlab-runner-gsrm OR roles:gitlab-runner-srm' -- sudo systemctl is-active chef-client
git checkout master && git pull
git checkout -b update-runners-to-12-10-0-rc1

update version

$EDITOR roles/gitlab-runner-base.json

In the role definition prepare the gitlab-runner entry:

"cookbook-gitlab-runner": {
  "gitlab-runner": {
    "repository": "unstable",
    "version": "12.10.0-rc1"
  }
}

remove overrides from prmX runners
```
$EDITOR roles/gitlab-runner-prm.json
```
git add roles/gitlab-runner-prm.json roles/gitlab-runner-base.json && git commit -m "Update runners to v12.10.0-rc1"
git push -u origin update-runners-to-12-10-0-rc1
after pushing the branch, create and manage to merge the chef-repo MR
check the apply to staging job if it tries to update only the changed role
start the manual apply to prod job

after the job is finished execute (we're not touching prmX - they are already updated):

knife ssh -C1 -afqdn 'roles:gitlab-runner-gsrm' -- sudo /root/runner_upgrade.sh &
knife ssh -C1 -afqdn 'roles:gitlab-runner-srm' -- sudo /root/runner_upgrade.sh &
time wait

New features window is closed - things not merged into master up to this day, will be released with next release.

Pick into stable branch for RC2 phase

At this moment, until the next RC creation, we're in the pick into stable phase. The release manager should periodically review the list of merged MRs with a pick into X.Y label:

GitLab Runner MRs:

GitLab Runner's Helm Chart MRs:

For each such Merge Request the release manager should (reveal for details)

Find the merge commit for the Merge Request
Copy the commit reference
Checkout to the branch:
- git checkout 12-10-stable && git pull for GitLab Runner, or
- git checkout 0-16-0-stable && git pull for GitLab Runner's Helm Chart

Pick the merge commit with:

git cherry-pick -m 1 [merge commit SHA here]

Remove the Pick into X.Y label from the Merge Request and leave a note that it was picked:

for GitLab Runner use this message:

The MR was picked into `12-10-stable` branch and will be released with `v12.10.0-rc2`

/unlabel ~"Pick into 12.10"

for GitLab Runner's Helm Chart use this message:

The MR was picked into `0-16-0-stable` branch and will be released with `v0.16.0-rc2`

/unlabel ~"Pick into 0.16"

To prepare the `Pick into ...` MRs list execute:

rrhelper \
    list-pick-mrs-for-rc \
    --non-interactive \
    --do-not-create \
    --major 12 \
    --minor 10  \
    --helm-chart-major 0 \
    --helm-chart-minor 16 \
    25315 2

v12.10.0-rc2 release

check if Pipeline for 12-10-stable is passing:
- add all required fixes to make 12-10-stable Pipeline passing
git checkout 12-10-stable && git pull in your local working copy!

prepare CHANGELOG entries

make generate_changelog CHANGELOG_RELEASE=v12.10.0-rc2

add v12.10.0-rc2 CHANGELOG entries and commit

git add CHANGELOG.md && \
git commit -m "Update CHANGELOG for v12.10.0-rc2" -S

tag and push v12.10.0-rc2:

git tag -s v12.10.0-rc2 -m "Version v12.10.0-rc2" && \
git push origin v12.10.0-rc2

push 12-10-stable branch:

git push origin v12.10.0-rc2 12-10-stable

wait for Pipeline for v12.10.0-rc2 to pass
- add all required fixes to make v12.10.0-rc2 passing

update runner helm chart to use v12.10.0-rc2 version

check if Pipeline for 0-16-0-stable is passing:
- add all required fixes to make 0-16-0-stable Pipeline passing
go to your local working copy of https://gitlab.com/gitlab-org/charts/gitlab-runner
git checkout 0-16-0-stable && git pull in your local working copy!

set Helm Chart to use v12.10.0-rc2 version of GitLab Runner

sed -i".bak" "s/^appVersion: .*/appVersion: 12.10.0-rc2/" Chart.yaml && \
rm Chart.yaml.bak && \
git add Chart.yaml && \
git commit -m "Update used GitLab Runner version to 12.10.0-rc2" -S

bump version of the Helm Chart to 0.16.0-rc2

sed -i".bak" "s/^version: .*/version: 0.16.0-rc2/" Chart.yaml && \
rm Chart.yaml.bak && \
git add Chart.yaml && \
git commit -m "Bump version to 0.16.0-rc2" -S

prepare CHANGELOG entries
```
make generate_changelog CHANGELOG_RELEASE=v0.16.0-rc2
```
- manually add line including GitLab Runner version update information as the first item:
```
- Update GitLab Runner version to 12.10.0-rc2
```

add v0.16.0-rc2 CHANGELOG entries and commit

git add CHANGELOG.md && \
git commit -m "Update CHANGELOG for v0.16.0-rc2" -S

tag and push v0.16.0-rc2:

git tag -s v0.16.0-rc2 -m "Version v0.16.0-rc2" && \
git push origin v0.16.0-rc2

push 0-16-0-stable:
```
git push origin 0-16-0-stable
```

deploy v12.10.0-rc2

Detailed description of Runners deployment for GitLab.com CI fleet can be found in the runbook.
- ~~at RC2 release day: to prmX runners~~ SKIPPING. Deploying all at once because of the gitlab#215037 (closed) regression
  - go to your local chef-repo working directory and execute:
```
knife ssh -afqdn 'roles:gitlab-runner-prm' -- sudo systemctl stop chef-client
knife ssh -afqdn 'roles:gitlab-runner-prm' -- sudo systemctl is-active chef-client
git checkout master && git pull
git checkout -b update-prm-runners-to-12-10-0-rc2
```
  - update version
```
$EDITOR roles/gitlab-runner-prm.json
```
    In the role definition prepare the override_attributes entry. It should be placed at the top of the file:
```
"override_attributes": {
  "cookbook-gitlab-runner": {
    "gitlab-runner": {
        "repository": "unstable",
        "version": "12.10.0-rc2"
    }
  }
},
```
  - git add roles/gitlab-runner-prm.json && git commit -m "Update prmX runners to v12.10.0-rc2"
  - git push -u origin update-prm-runners-to-12-10-0-rc2
  - after pushing the branch, create and manage to merge the chef-repo MR
  - check the apply to staging job if it tries to update only the changed role
  - start the manual apply to prod job
  - after the job is finished execute:
```
knife ssh -C 1 -afqdn 'roles:gitlab-runner-prm' -- sudo /root/runner_upgrade.sh &
time wait
```
- ~~next day (if no problems): to rest of the runners~~ deploy all of the runners
  - go to your local chef-repo working directory and execute:
```
knife ssh -afqdn 'roles:gitlab-runner-base' -- sudo systemctl stop chef-client
knife ssh -afqdn 'roles:gitlab-runner-base' -- sudo systemctl is-active chef-client
git checkout master && git pull
git checkout -b update-runners-to-12-10-0-rc2
```
  - update version
```
$EDITOR roles/gitlab-runner-base.json
```
    In the role definition prepare the gitlab-runner entry:
```
"cookbook-gitlab-runner": {
  "gitlab-runner": {
    "repository": "unstable",
    "version": "12.10.0-rc2"
  }
}
```
  - ~~remove overrides from prmX runners~~
```
$EDITOR roles/gitlab-runner-prm.json
```
  - git add roles/gitlab-runner-prm.json roles/gitlab-runner-base.json && git commit -m "Update runners to v12.10.0-rc2"
  - git push -u origin update-runners-to-12-10-0-rc2
  - after pushing the branch, create and manage to merge the chef-repo MR
  - check the apply to staging job if it tries to update only the changed role
  - start the manual apply to prod job
  - after the job is finished execute (we're not touching prmX - they are already updated):
```
knife ssh -C1 -afqdn 'roles:gitlab-runner-prm' -- sudo /root/runner_upgrade.sh &
knife ssh -C1 -afqdn 'roles:gitlab-runner-gsrm' -- sudo /root/runner_upgrade.sh &
knife ssh -C1 -afqdn 'roles:gitlab-runner-srm' -- sudo /root/runner_upgrade.sh &
time wait
```

Pick into stable branch for RC3 phase

At this moment, until the next RC creation, we're in the pick into stable phase. The release manager should periodically review the list of merged MRs with a pick into X.Y label:

GitLab Runner MRs:

GitLab Runner's Helm Chart MRs:

For each such Merge Request the release manager should (reveal for details)

Find the merge commit for the Merge Request
Copy the commit reference
Checkout to the branch:
- git checkout 12-10-stable && git pull for GitLab Runner, or
- git checkout 0-16-0-stable && git pull for GitLab Runner's Helm Chart

Pick the merge commit with:

git cherry-pick -m 1 [merge commit SHA here]

Remove the Pick into X.Y label from the Merge Request and leave a note that it was picked:

for GitLab Runner use this message:

/unlabel ~"Pick into 12.10"

The MR was picked into `12-10-stable` branch and will be released with `v12.10.0-rc3`

for GitLab Runner's Helm Chart use this message:

/unlabel ~"Pick into 0.16"

The MR was picked into `0-16-0-stable` branch and will be released with `v0.16.0-rc3`

To prepare the `Pick into ...` MRs list execute:

rrhelper \
    list-pick-mrs-for-rc \
    --non-interactive \
    --do-not-create \
    --major 12 \
    --minor 10  \
    --helm-chart-major 0 \
    --helm-chart-minor 16 \
    25315 3

RC3 (if needed)

If any commit was picked into the stable branch since RC2 was released, RC3 version must be released no later than at 18th day of the month or immediately if changes were picked after 18th.

If you need to create RC3 version, then please execute this and follow the created checklist for RC3:

rrhelper \
    create-next-rc-checklist \
    --non-interactive \
    --do-not-create \
    --major 12 \
    --minor 10  \
    --helm-chart-major 0 \
    --helm-chart-minor 16 \
    25315 3

At 20th - the release day of GitLab Runner

check if Pipeline for 12-10-stable is passing:
- add all required fixes to make 12-10-stable Pipeline passing
git checkout 12-10-stable && git pull in your local working copy!
merge all RCx CHANGELOG entries into release entry

Also add all missing entries (should not happen at this moment unless an RC release was consciously skipped) and put a proper header at the beginning:
```
make generate_changelog CHANGELOG_RELEASE=v12.10.0
```
- merge all RC entries

add v12.10.0 CHANGELOG entries and commit

git add CHANGELOG.md && \
git commit -m "Update CHANGELOG for v12.10.0" -S

tag and push v12.10.0 and 12-10-stable:

git tag -s v12.10.0 -m "Version v12.10.0" && \
git push origin v12.10.0 12-10-stable

checkout to master and merge 12-10-stable into master, push master:

git checkout master && \
git pull && \
git merge --no-ff 12-10-stable
# check that the only changes are in CHANGELOG.md
git push

update runner helm chart to use v12.10.0 version
- check if Pipeline for 0-16-0-stable is passing:
  - add all required fixes to make 0-16-0-stable Pipeline passing
- go to your local working copy of https://gitlab.com/gitlab-org/charts/gitlab-runner
- git checkout 0-16-0-stable && git pull in your local working copy!
- update GitLab Runner version
```
sed -i".bak" "s/^appVersion: .*/appVersion: 12.10.1/" Chart.yaml && \
rm Chart.yaml.bak && \
git add Chart.yaml && \
git commit -m "Update used GitLab Runner version to 12.10.1" -S
```
- bump version of the Helm Chart to 0.16.0
```
sed -i".bak" "s/^version: .*/version: 0.16.0/" Chart.yaml && \
rm Chart.yaml.bak && \
git add Chart.yaml && \
git commit -m "Bump version to 0.16.0" -S
```
- merge all RCx CHANGELOG entries into release entry
  
  Also add all missing entries (should not happen at this moment unless an RC release was consciously skipped) and put a proper header at the beginning:
```
make generate_changelog CHANGELOG_RELEASE=v0.16.0-rc1
```
  - merge all RC entries
  - remove all Update GitLab Runner version to 12.10.0-rcX lines from the changes list
  - manually add line including GitLab Runner version update information as the first item:
```
- Update GitLab Runner version to 12.10.1
```
- add v0.16.0 CHANGELOG entries and commit
```
git add CHANGELOG.md && \
git commit -m "Update CHANGELOG for v0.16.0" -S
```
- tag and push v0.16.0 and 0-16-0-stable:
```
git tag -s v0.16.0 -m "Version v0.16.0" && \
git push origin v0.16.0 0-16-0-stable
```
- checkout to master and merge 0-16-0-stable into master (only this one time, to update CHANGELOG.md and make the tag available for ./scripts/prepare-changelog-entries.rb in next stable release), push master:
```
git checkout master && \
git pull && \
git merge --no-ff 0-16-0-stable
# check that the only changes are in CHANGELOG.md
git push
```

update Runner's chart version used by GitLab: gitlab!31492 (merged)

create branch

rrhelper \
    --dry-run \
    create-branch \
    gitlab-org/gitlab \
    update-gitlab-runner-helm-chart-to-0-16-0

create Merge Request

rrhelper \
    --dry-run \
    create-merge-request \
    --release-checklist-issue 25315 \
    --replace-link-in-release-checklist-issue link_to_MR__gce_rhcvu \
    --milestone 13.0 \
    --runner-version 12.10.1 \
    --helm-chart-version 0.16.0 \
    gitlab-org/gitlab \
    update-gitlab-runner-helm-chart-to-0-16-0 \
    master \
    runner-helm-chart-upgrade-in-gitlab \
    "Update GitLab Runner Helm Chart to 0.16.0/12.10.1"

Adjust and apply the patch to the GitLab CE sources

See the patch draft

Adjust the following patch (set proper current version; set the Merge Request ID in the CHANGELOG entry file) and save it at /tmp/patch.gitlab.

cat > /tmp/patch.gitlab << EOF
diff --git a/app/models/clusters/applications/runner.rb b/app/models/clusters/applications/runner.rb
index 0c0247da1fb..f17da0bb7b1 100644
--- a/app/models/clusters/applications/runner.rb
+++ b/app/models/clusters/applications/runner.rb
@@ -3,7 +3,7 @@
 module Clusters
   module Applications
     class Runner < ApplicationRecord
-      VERSION = '0.15.0'
+      VERSION = '0.16.0'

       self.table_name = 'clusters_applications_runners'

diff --git a/changelogs/unreleased/update-gitlab-runner-helm-chart-to-0-16-0.yml b/changelogs/unreleased/update-gitlab-runner-helm-chart-to-0-16-0.yml
new file mode 100644
index 00000000000..7d92929221f
--- /dev/null
+++ b/changelogs/unreleased/update-gitlab-runner-helm-chart-to-0-16-0.yml
@@ -0,0 +1,5 @@
+---
+title: Update GitLab Runner Helm Chart to 0.16.0
+merge_request: XXX
+author:
+type: other
EOF

Go to your local GitLab CE working directory:

git checkout master && \
    git pull && \
    git checkout update-gitlab-runner-helm-chart-to-0-16-0 && \
    git apply /tmp/patch.gitlab && \
    git add . && \
    git commit -m "Update GitLab Runner Helm Chart to 0.16.0"

Push changes

git push -u origin update-gitlab-runner-helm-chart-to-0-16-0

update Runner's chart version used by Cluster Applications: gitlab-org/cluster-integration/cluster-applications!89 (closed)

create branch

rrhelper \
    --dry-run \
    create-branch \
    gitlab-org/cluster-integration/cluster-applications \
    update-gitlab-runner-helm-chart-to-0-16-0

create Merge Request

rrhelper \
    --dry-run \
    create-merge-request \
    --release-checklist-issue 25315 \
    --replace-link-in-release-checklist-issue link_to_MR__ghc_rhcvu \
    --milestone 12.10 \
    --runner-version 12.10.1 \
    --helm-chart-version 0.16.0 \
    gitlab-org/cluster-integration/cluster-applications \
    update-gitlab-runner-helm-chart-to-0-16-0 \
    master \
    runner-helm-chart-upgrade-in-cluster-applications \
    "Update GitLab Runner Helm Chart to 0.16.0/12.10.1"

Adjust and apply the patch to the GitLab Helm Chart sources

See the patch draft

Adjust the following patch (set proper current version; set the Merge Request ID in the CHANGELOG entry file) and save it at /tmp/patch.gitlab-cluster-applications.

cat > /tmp/patch.gitlab-cluster-applications << EOF
diff --git a/src/default-data/gitlab-runner/helmfile.yaml b/src/default-data/gitlab-runner/helmfile.yaml
index d839d7f..f358afa 100644
--- a/src/default-data/gitlab-runner/helmfile.yaml
+++ b/src/default-data/gitlab-runner/helmfile.yaml
@@ -13,7 +13,7 @@ releases:
 - name: runner
   namespace: {{ requiredEnv "TILLER_NAMESPACE" }}
   chart: gitlab/gitlab-runner
-  version: 0.15.0
+  version: 0.16.0
   installed: {{ .Values.gitlabRunner.installed }}
   missingFileHandler: Warn
   values:
EOF

Go to your local GitLab Cluster Application working directory:

git checkout master && \
    git pull && \
    git checkout update-gitlab-runner-helm-chart-to-0-16-0 && \
    git apply /tmp/patch.gitlab-cluster-applications && \
    git add . && \
    git commit -m "Update GitLab Runner Helm Chart to 0.16.0"

Push changes

git push -u origin update-gitlab-runner-helm-chart-to-0-16-0

At 22nd - the official day of GitLab release

wait for Pipeline for v12.10.1 to pass
- add all required fixes to make v12.10.1 passing

deploy v12.10.1

Detailed description of Runners deployment for GitLab.com CI fleet can be found in the runbook.

at release day: to prmX runners

go to your local chef-repo working directory and execute:

knife ssh -afqdn 'roles:gitlab-runner-prm' -- sudo systemctl stop chef-client
knife ssh -afqdn 'roles:gitlab-runner-prm' -- sudo systemctl is-active chef-client
git checkout master && git pull
git checkout -b update-prm-runners-to-12-10-1

update version

$EDITOR roles/gitlab-runner-prm.json

In the role definition prepare the override_attributes entry. It should be placed at the top of the file:

"override_attributes": {
  "cookbook-gitlab-runner": {
    "gitlab-runner": {
        "repository": "gitlab-runner",
        "version": "12.10.1"
    }
  }
},

git add roles/gitlab-runner-prm.json && git commit -m "Update prmX runners to v12.10.1"
git push -u origin update-prm-runners-to-12-10-1
after pushing the branch, create and manage to merge the chef-repo MR
check the apply to staging job if it tries to update only the changed role
start the manual apply to prod job

after the job is finished execute:

knife ssh -C 1 -afqdn 'roles:gitlab-runner-prm' -- sudo /root/runner_upgrade.sh &
time wait

next day (if no problems): to rest of the runners

go to your local chef-repo working directory and execute:

knife ssh -afqdn 'roles:gitlab-runner-gsrm OR roles:gitlab-runner-srm' -- sudo systemctl stop chef-client
knife ssh -afqdn 'roles:gitlab-runner-gsrm OR roles:gitlab-runner-srm' -- sudo systemctl is-active chef-client
git checkout master && git pull
git checkout -b update-runners-to-12-10-1

update version

$EDITOR roles/gitlab-runner-base.json

In the role definition prepare the gitlab-runner entry:

"cookbook-gitlab-runner": {
  "gitlab-runner": {
    "repository": "gitlab-runner",
    "version": "12.10.1"
  }
}

remove overrides from prmX runners
```
$EDITOR roles/gitlab-runner-prm.json
```
git add roles/gitlab-runner-prm.json roles/gitlab-runner-base.json && git commit -m "Update runners to v12.10.1"
git push -u origin update-runners-to-12-10-1
after pushing the branch, create and manage to merge the chef-repo MR
check the apply to staging job if it tries to update only the changed role
start the manual apply to prod job

after the job is finished execute (we're not touching prmX - they are already updated):

knife ssh -C1 -afqdn 'roles:gitlab-runner-gsrm' -- sudo /root/runner_upgrade.sh &
knife ssh -C1 -afqdn 'roles:gitlab-runner-srm' -- sudo /root/runner_upgrade.sh &
time wait

Before next 7th

chose a release manager

create a Pick into 0.17 label in Helm Chart's project

rrhelper \
    --dry-run \
    create-label \
    6329679 \
    "Pick into 0.17" \
    "Merge Requests to pick into 0-17-0 stable branch" \
    "#00C8CA"

create the new Release Checklist issue: #25596 (closed)

rrhelper \
    create-release-checklist \
    --do-not-create \
    --non-interactive \
    --replace-link-in-previous-release-checklist-issue link_to_new_checklist_issue \
    --release-manager-handle release_manager \
    --previous-release-checklist-issue 25315

Edited May 08, 2020 by Tomasz Maczukin