Commit f10a3353 authored by Julian Seward's avatar Julian Seward

bzip2-1.0.4

parent 4d540bfc
------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------
0.9.0
......@@ -261,7 +274,7 @@ Fixes some minor bugs since the last version, 1.0.2.
decompressor to crash, loop or access memory which does not
belong to it. If you are using bzip2 or the library to
decompress bitstreams from untrusted sources, an upgrade
to 1.0.3 is recommended.
to 1.0.3 is recommended. This fixes CAN-2005-1260.
* The documentation has been converted to XML, from which html
and pdf can be derived.
......@@ -273,3 +286,29 @@ Fixes some minor bugs since the last version, 1.0.2.
* The BZ_NO_STDIO cpp symbol was not properly observed in 1.0.2.
This has been fixed.
1.0.4 (20 Dec 06)
~~~~~~~~~~~~~~~~~
Fixes some minor bugs since the last version, 1.0.3.
* Fix file permissions race problem (CAN-2005-0953).
* Avoid possible segfault in BZ2_bzclose. From Coverity's NetBSD
scan.
* 'const'/prototype cleanups in the C code.
* Change default install location to /usr/local, and handle multiple
'make install's without error.
* Sanitise file names more carefully in bzgrep. Fixes CAN-2005-0758
to the extent that applies to bzgrep.
* Use 'mktemp' rather than 'tempfile' in bzdiff.
* Tighten up a couple of assertions in blocksort.c following automated
analysis.
* Fix minor doc/comment bugs.
--------------------------------------------------------------------------
This program, "bzip2", the associated library "libbzip2", and all
documentation, are copyright (C) 1996-2005 Julian R Seward. All
documentation, are copyright (C) 1996-2006 Julian R Seward. All
rights reserved.
Redistribution and use in source and binary forms, with or without
......@@ -35,6 +37,7 @@ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@acm.org
bzip2/libbzip2 version 1.0.3 of 15 February 2005
jseward@bzip.org
bzip2/libbzip2 version 1.0.4 of 20 December 2006
--------------------------------------------------------------------------
# ------------------------------------------------------------------
# This file is part of bzip2/libbzip2, a program and library for
# lossless, block-sorting data compression.
#
# bzip2/libbzip2 version 1.0.4 of 20 December 2006
# Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
#
# Please read the WARNING, DISCLAIMER and PATENTS sections in the
# README file.
#
# This program is released under the terms of the license contained
# in the file LICENSE.
# ------------------------------------------------------------------
SHELL=/bin/sh
......@@ -8,10 +21,10 @@ RANLIB=ranlib
LDFLAGS=
BIGFILES=-D_FILE_OFFSET_BITS=64
CFLAGS=-Wall -Winline -O -g $(BIGFILES)
CFLAGS=-Wall -Winline -O2 -g $(BIGFILES)
# Where you want it installed when you do 'make install'
PREFIX=/usr
PREFIX=/usr/local
OBJS= blocksort.o \
......@@ -77,14 +90,14 @@ install: bzip2 bzip2recover
cp -f libbz2.a $(PREFIX)/lib
chmod a+r $(PREFIX)/lib/libbz2.a
cp -f bzgrep $(PREFIX)/bin/bzgrep
ln $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzegrep
ln $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzfgrep
ln -s -f $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzegrep
ln -s -f $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzfgrep
chmod a+x $(PREFIX)/bin/bzgrep
cp -f bzmore $(PREFIX)/bin/bzmore
ln $(PREFIX)/bin/bzmore $(PREFIX)/bin/bzless
ln -s -f $(PREFIX)/bin/bzmore $(PREFIX)/bin/bzless
chmod a+x $(PREFIX)/bin/bzmore
cp -f bzdiff $(PREFIX)/bin/bzdiff
ln $(PREFIX)/bin/bzdiff $(PREFIX)/bin/bzcmp
ln -s -f $(PREFIX)/bin/bzdiff $(PREFIX)/bin/bzcmp
chmod a+x $(PREFIX)/bin/bzdiff
cp -f bzgrep.1 bzmore.1 bzdiff.1 $(PREFIX)/man/man1
chmod a+r $(PREFIX)/man/man1/bzgrep.1
......@@ -124,10 +137,10 @@ bzip2recover.o: bzip2recover.c
distclean: clean
rm -f manual.ps manual.html manual.pdf
DISTNAME=bzip2-1.0.3
DISTNAME=bzip2-1.0.4
dist: check manual
rm -f $(DISTNAME)
ln -sf . $(DISTNAME)
ln -s -f . $(DISTNAME)
tar cvf $(DISTNAME).tar \
$(DISTNAME)/blocksort.c \
$(DISTNAME)/huffman.c \
......@@ -167,7 +180,6 @@ dist: check manual
$(DISTNAME)/libbz2.dsp \
$(DISTNAME)/dlltest.dsp \
$(DISTNAME)/makefile.msc \
$(DISTNAME)/Y2K_INFO \
$(DISTNAME)/unzcrash.c \
$(DISTNAME)/spewG.c \
$(DISTNAME)/mk251.c \
......
# This Makefile builds a shared version of the library,
# libbz2.so.1.0.3, with soname libbz2.so.1.0,
# libbz2.so.1.0.4, with soname libbz2.so.1.0,
# at least on x86-Linux (RedHat 7.2),
# with gcc-2.96 20000731 (Red Hat Linux 7.1 2.96-98).
# Please see the README file for some
# important info about building the library like this.
# Please see the README file for some important info
# about building the library like this.
# ------------------------------------------------------------------
# This file is part of bzip2/libbzip2, a program and library for
# lossless, block-sorting data compression.
#
# bzip2/libbzip2 version 1.0.4 of 20 December 2006
# Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
#
# Please read the WARNING, DISCLAIMER and PATENTS sections in the
# README file.
#
# This program is released under the terms of the license contained
# in the file LICENSE.
# ------------------------------------------------------------------
SHELL=/bin/sh
CC=gcc
BIGFILES=-D_FILE_OFFSET_BITS=64
CFLAGS=-fpic -fPIC -Wall -Winline -O -g
CFLAGS=-fpic -fPIC -Wall -Winline -O2 -g $(BIGFILES)
OBJS= blocksort.o \
huffman.o \
......@@ -20,13 +35,13 @@ OBJS= blocksort.o \
bzlib.o
all: $(OBJS)
$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.3 $(OBJS)
$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.3
$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.4 $(OBJS)
$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.4
rm -f libbz2.so.1.0
ln -s libbz2.so.1.0.3 libbz2.so.1.0
ln -s libbz2.so.1.0.4 libbz2.so.1.0
clean:
rm -f $(OBJS) bzip2.o libbz2.so.1.0.3 libbz2.so.1.0 bzip2-shared
rm -f $(OBJS) bzip2.o libbz2.so.1.0.4 libbz2.so.1.0 bzip2-shared
blocksort.o: blocksort.c
$(CC) $(CFLAGS) -c blocksort.c
......
This is the README for bzip2, a block-sorting file compressor, version
1.0.3. This version is fully compatible with the previous public
releases, versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and 1.0.2.
This is the README for bzip2/libzip2.
This version is fully compatible with the previous public releases.
bzip2-1.0.3 is distributed under a BSD-style license. For details,
see the file LICENSE.
------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in this file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------
Complete documentation is available in Postscript form (manual.ps),
PDF (manual.pdf) or html (manual.html). A plain-text version of the
manual page is available as bzip2.txt. A statement about Y2K issues
is now included in the file Y2K_INFO.
manual page is available as bzip2.txt.
HOW TO BUILD -- UNIX
Type `make'. This builds the library libbz2.a and then the
programs bzip2 and bzip2recover. Six self-tests are run.
If the self-tests complete ok, carry on to installation:
Type 'make'. This builds the library libbz2.a and then the programs
bzip2 and bzip2recover. Six self-tests are run. If the self-tests
complete ok, carry on to installation:
To install in /usr/local/bin, /usr/local/lib, /usr/local/man and
/usr/local/include, type
To install in /usr/bin, /usr/lib, /usr/man and /usr/include, type
make install
To install somewhere else, eg, /xxx/yyy/{bin,lib,man,include}, type
To install somewhere else, eg, /xxx/yyy/{bin,lib,man,include}, type
make install PREFIX=/xxx/yyy
If you are (justifiably) paranoid and want to see what 'make install'
is going to do, you can first do
make -n install or
make -n install PREFIX=/xxx/yyy respectively.
The -n instructs make to show the commands it would execute, but
not actually execute them.
The -n instructs make to show the commands it would execute, but not
actually execute them.
HOW TO BUILD -- UNIX, shared library libbz2.so.
......@@ -49,23 +64,25 @@ Important note for people upgrading .so's from 0.9.0/0.9.5 to version
bzCompress to BZ2_bzCompress, to avoid namespace pollution.
Unfortunately this means that the libbz2.so created by
Makefile-libbz2_so will not work with any program which used an older
version of the library. Sorry. I do encourage library clients to
make the effort to upgrade to use version 1.0, since it is both faster
and more robust than previous versions.
version of the library. I do encourage library clients to make the
effort to upgrade to use version 1.0, since it is both faster and more
robust than previous versions.
HOW TO BUILD -- Windows 95, NT, DOS, Mac, etc.
It's difficult for me to support compilation on all these platforms.
My approach is to collect binaries for these platforms, and put them
on the master web page (http://sources.redhat.com/bzip2). Look there.
However (FWIW), bzip2-1.0.X is very standard ANSI C and should compile
on the master web site (http://www.bzip.org). Look there. However
(FWIW), bzip2-1.0.X is very standard ANSI C and should compile
unmodified with MS Visual C. If you have difficulties building, you
might want to read README.COMPILATION.PROBLEMS.
At least using MS Visual C++ 6, you can build from the unmodified
sources by issuing, in a command shell:
nmake -f makefile.msc
(you may need to first run the MSVC-provided script VCVARS32.BAT
so as to set up paths to the MSVC tools correctly).
......@@ -86,18 +103,19 @@ Please read and be aware of the following:
WARNING:
This program (attempts to) compress data by performing several
non-trivial transformations on it. Unless you are 100% familiar
with *all* the algorithms contained herein, and with the
consequences of modifying them, you should NOT meddle with the
compression or decompression machinery. Incorrect changes can and
very likely *will* lead to disastrous loss of data.
This program and library (attempts to) compress data by
performing several non-trivial transformations on it.
Unless you are 100% familiar with *all* the algorithms
contained herein, and with the consequences of modifying them,
you should NOT meddle with the compression or decompression
machinery. Incorrect changes can and very likely *will*
lead to disastrous loss of data.
DISCLAIMER:
I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
USE OF THIS PROGRAM, HOWSOEVER CAUSED.
USE OF THIS PROGRAM/LIBRARY, HOWSOEVER CAUSED.
Every compression of a file implies an assumption that the
compressed file can be decompressed to reproduce the original.
......@@ -110,19 +128,18 @@ DISCLAIMER:
PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE POSSIBILITY, HOWEVER
SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.
That is not to say this program is inherently unreliable. Indeed,
I very much hope the opposite is true. bzip2 has been carefully
constructed and extensively tested.
That is not to say this program is inherently unreliable.
Indeed, I very much hope the opposite is true. bzip2/libbzip2
has been carefully constructed and extensively tested.
PATENTS:
To the best of my knowledge, bzip2 does not use any patented
algorithms. However, I do not have the resources to carry out
a patent search. Therefore I cannot give any guarantee of the
above statement.
To the best of my knowledge, bzip2/libbzip2 does not use any
patented algorithms. However, I do not have the resources
to carry out a patent search. Therefore I cannot give any
guarantee of the above statement.
End of legalities.
WHAT'S NEW IN 0.9.0 (as compared to 0.1pl2) ?
......@@ -156,21 +173,23 @@ WHAT'S NEW IN 1.0.3 ?
See the CHANGES file.
WHAT'S NEW IN 1.0.4 ?
See the CHANGES file.
I hope you find bzip2 useful. Feel free to contact me at
jseward@bzip.org
if you have any suggestions or queries. Many people mailed me with
comments, suggestions and patches after the releases of bzip-0.15,
bzip-0.21, and bzip2 versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and
1.0.2, and the changes in bzip2 are largely a result of this feedback.
I thank you for your comments.
bzip-0.21, and bzip2 versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1,
1.0.2 and 1.0.3, and the changes in bzip2 are largely a result of this
feedback. I thank you for your comments.
At least for the time being, bzip2's "home" is (or can be reached via)
http://www.bzip.org
bzip2's "home" is http://www.bzip.org/
Julian Seward
jseward@bzip.org
Cambridge, UK.
18 July 1996 (version 0.15)
......@@ -183,3 +202,4 @@ Cambridge, UK.
5 May 2000 (bzip2, version 1.0pre8)
30 December 2001 (bzip2, version 1.0.2pre1)
15 February 2005 (bzip2, version 1.0.3)
20 December 2006 (bzip2, version 1.0.4)
------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2-1.0.3 should compile without problems on the vast majority of
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------
bzip2-1.0.4 should compile without problems on the vast majority of
platforms. Using the supplied Makefile, I've built and tested it
myself for x86-linux and x86_64-linux. With makefile.msc, Visual C++
myself for x86-linux and amd64-linux. With makefile.msc, Visual C++
6.0 and nmake, you can build a native Win32 version too. Large file
support seems to work correctly on at least alpha-tru64unix and
x86-cygwin32 (on Windows 2000).
support seems to work correctly on at least on amd64-linux.
When I say "large file" I mean a file of size 2,147,483,648 (2^31)
bytes or above. Many older OSs can't handle files above this size,
but many newer ones can. Large files are pretty huge -- most files
you'll encounter are not Large Files.
Earlier versions of bzip2 (0.1, 0.9.0, 0.9.5) compiled on a wide
variety of platforms without difficulty, and I hope this version will
continue in that tradition. However, in order to support large files,
I've had to include the define -D_FILE_OFFSET_BITS=64 in the Makefile.
This can cause problems.
Early versions of bzip2 (0.1, 0.9.0, 0.9.5) compiled on a wide variety
of platforms without difficulty, and I hope this version will continue
in that tradition. However, in order to support large files, I've had
to include the define -D_FILE_OFFSET_BITS=64 in the Makefile. This
can cause problems.
The technique of adding -D_FILE_OFFSET_BITS=64 to get large file
support is, as far as I know, the Recommended Way to get correct large
file support. For more details, see the Large File Support
Specification, published by the Large File Summit, at
http://ftp.sas.com/standards/large.file
As a general comment, if you get compilation errors which you think
are related to large file support, try removing the above define from
the Makefile, ie, delete the line
BIGFILES=-D_FILE_OFFSET_BITS=64
from the Makefile, and do 'make clean ; make'. This will give you a
version of bzip2 without large file support, which, for most
applications, is probably not a problem.
......@@ -37,3 +52,7 @@ You can use the spewG.c program to generate huge files to test bzip2's
large file support, if you are feeling paranoid. Be aware though that
any compilation problems which affect bzip2 will also affect spewG.c,
alas.
AIX: I have reports that for large file support, you need to specify
-D_LARGE_FILES rather than -D_FILE_OFFSET_BITS=64. I have not tested
this myself.
----------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
----------------------------------------------------------------
The script xmlproc.sh takes an xml file as input,
and processes it to create .pdf, .html or .ps output.
It uses format.pl, a perl script to format <pre> blocks nicely,
......@@ -9,16 +23,16 @@ version, year, etc.
Usage:
xmlproc.sh -v manual.xml
./xmlproc.sh -v manual.xml
Validates an xml file to ensure no dtd-compliance errors
xmlproc.sh -html manual.xml
./xmlproc.sh -html manual.xml
Output: manual.html
xmlproc.sh -pdf manual.xml
./xmlproc.sh -pdf manual.xml
Output: manual.pdf
xmlproc.sh -ps manual.xml
./xmlproc.sh -ps manual.xml
Output: manual.ps
......
Y2K status of bzip2 and libbzip2, versions 0.1, 0.9.0 and 0.9.5
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Informally speaking:
bzip2 is a compression program built on top of libbzip2,
a library which does the real work of compression and
decompression. As far as I am aware, libbzip2 does not have
any date-related code at all.
bzip2 itself copies dates from source to destination files
when compressing or decompressing, using the 'stat' and 'utime'
UNIX system calls. It doesn't examine, manipulate or store the
dates in any way. So as far as I can see, there shouldn't be any
problem with bzip2 providing 'stat' and 'utime' work correctly
on your system.
On non-unix platforms (those for which BZ_UNIX in bzip2.c is
not set to 1), bzip2 doesn't even do the date copying.
Overall, informally speaking, I don't think bzip2 or libbzip2
have a Y2K problem.
Formally speaking:
I am not prepared to offer you any assurance whatsoever
regarding Y2K issues in my software. You alone assume the
entire risk of using the software. The disclaimer of liability
in the LICENSE file in the bzip2 source distribution continues
to apply on this issue as with every other issue pertaining
to the software.
Julian Seward
Cambridge, UK
25 August 1999
......@@ -4,66 +4,19 @@
/*--- blocksort.c ---*/
/*-------------------------------------------------------------*/
/*--
This file is a part of bzip2 and/or libbzip2, a program and
library for lossless, block-sorting data compression.
Copyright (C) 1996-2005 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@bzip.org
bzip2/libbzip2 version 1.0 of 21 March 2000
This program is based on (at least) the work of:
Mike Burrows
David Wheeler
Peter Fenwick
Alistair Moffat
Radford Neal
Ian H. Witten
Robert Sedgewick
Jon L. Bentley
For more information on these sources, see the manual.
To get some idea how the block sorting algorithms in this file
work, read my paper
On the Performance of BWT Sorting Algorithms
in Proceedings of the IEEE Data Compression Conference 2000,
Snowbird, Utah, USA, 27-30 March 2000. The main sort in this
file implements the algorithm called cache in the paper.
--*/
/* ------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------ */
#include "bzlib_private.h"
......@@ -155,7 +108,7 @@ void fallbackQSort3 ( UInt32* fmap,
while (sp > 0) {
AssertH ( sp < FALLBACK_QSORT_STACK_SIZE, 1004 );
AssertH ( sp < FALLBACK_QSORT_STACK_SIZE - 1, 1004 );
fpop ( lo, hi );
if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
......@@ -690,7 +643,7 @@ void mainQSort3 ( UInt32* ptr,
while (sp > 0) {
AssertH ( sp < MAIN_QSORT_STACK_SIZE, 1001 );
AssertH ( sp < MAIN_QSORT_STACK_SIZE - 2, 1001 );
mpop ( lo, hi, d );
if (hi - lo < MAIN_QSORT_SMALL_THRESH ||
......
......@@ -254,4 +254,23 @@
</xsl:template>
<!-- Bug-fix for Suse 10 PassiveTex version -->
<!-- Precompute attribute values 'cos PassiveTex is too stupid: -->
<xsl:attribute-set name="component.title.properties">
<xsl:attribute name="keep-with-next.within-column">always</xsl:attribute>
<xsl:attribute name="space-before.optimum">
<xsl:value-of select="concat($body.font.master, 'pt')"/>
</xsl:attribute>
<xsl:attribute name="space-before.minimum">
<xsl:value-of select="$body.font.master * 0.8"/>
<xsl:text>pt</xsl:text>
</xsl:attribute>
<xsl:attribute name="space-before.maximum">
<xsl:value-of select="$body.font.master * 1.2"/>
<xsl:text>pt</xsl:text>
</xsl:attribute>
<xsl:attribute name="hyphenate">false</xsl:attribute>
</xsl:attribute-set>
</xsl:stylesheet>
......@@ -12,7 +12,7 @@
# necessary) and fed to cmp or diff. The exit status from cmp
# or diff is preserved.
PATH="/usr/bin:$PATH"; export PATH
PATH="/usr/bin:/bin:$PATH"; export PATH
prog=`echo $0 | sed 's|.*/||'`
case "$prog" in
*cmp) comp=${CMP-cmp} ;;
......@@ -37,7 +37,7 @@ if test -z "$FILES"; then
echo "Usage: $prog [${comp}_options] file [file]"
exit 1
fi
tmp=`tempfile -d /tmp -p bz` || {
tmp=`mktemp ${TMPDIR:-/tmp}/bzdiff.XXXXXXXXXX` || {
echo 'cannot create a temporary file' >&2
exit 1
}
......
......@@ -63,7 +63,11 @@ for i do
bzip2 -cdfq "$i" | $grep $opt "$pat"
r=$?
else
bzip2 -cdfq "$i" | $grep $opt "$pat" | sed "s|^|${i}:|"
j=${i//\\/\\\\}
j=${j//|/\\|}
j=${j//&/\\&}
j=`printf "%s" "$j" | tr '\n' ' '`
bzip2 -cdfq "$i" | $grep $opt "$pat" | sed "s|^|${j}:|"
r=$?
fi
test "$r" -ne 0 && res="$r"
......
.PU
.TH bzip2 1
.SH NAME
bzip2, bunzip2 \- a block-sorting file compressor, v1.0.3
bzip2, bunzip2 \- a block-sorting file compressor, v1.0.4
.br
bzcat \- decompresses files to stdout
.br
......@@ -405,11 +405,11 @@ I/O error messages are not as helpful as they could be.
tries hard to detect I/O errors and exit cleanly, but the details of
what the problem is sometimes seem rather misleading.
This manual page pertains to version 1.0.3 of
This manual page pertains to version 1.0.4 of
.I bzip2.
Compressed data created by this version is entirely forwards and
backwards compatible with the previous public releases, versions
0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and 1.0.2, but with the following
0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1, 1.0.2 and 1.0.3, but with the following
exception: 0.9.0 and above can correctly decompress multiple
concatenated compressed files. 0.1pl2 cannot do this; it will stop
after decompressing just the first file in the stream.
......
......@@ -3,7 +3,7 @@ bzip2(1) bzip2(1)
NNAAMMEE
bzip2, bunzip2 − a block‐sorting file compressor, v1.0.3
bzip2, bunzip2 − a block‐sorting file compressor, v1.0.4
bzcat − decompresses files to stdout
bzip2recover − recovers data from damaged bzip2 files
......@@ -348,14 +348,14 @@ CCAAVVEEAATTSS
but the details of what the problem is sometimes seem
rather misleading.
This manual page pertains to version 1.0.3 of _b_z_i_p_2_. Com­
This manual page pertains to version 1.0.4 of _b_z_i_p_2_. Com­
pressed data created by this version is entirely forwards
and backwards compatible with the previous public
releases, versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and
1.0.2, but with the following exception: 0.9.0 and above
can correctly decompress multiple concatenated compressed
files. 0.1pl2 cannot do this; it will stop after decom­
pressing just the first file in the stream.
releases, versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1,
1.0.2 and 1.0.3, but with the following exception: 0.9.0
and above can correctly decompress multiple concatenated
compressed files. 0.1pl2 cannot do this; it will stop
after decompressing just the first file in the stream.
_b_z_i_p_2_r_e_c_o_v_e_r versions prior to 1.0.2 used 32‐bit integers
to represent bit positions in compressed files, so they
......
This diff is collapsed.
NAME
bzip2, bunzip2 - a block-sorting file compressor, v1.0.3
bzip2, bunzip2 - a block-sorting file compressor, v1.0.4
bzcat - decompresses files to stdout
bzip2recover - recovers data from damaged bzip2 files
......@@ -345,14 +345,14 @@ CAVEATS
but the details of what the problem is sometimes seem
rather misleading.
This manual page pertains to version 1.0.3 of bzip2. Com-
This manual page pertains to version 1.0.4 of bzip2. Com-
pressed data created by this version is entirely forwards
and backwards compatible with the previous public
releases, versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1 and
1.0.2, but with the following exception: 0.9.0 and above
can correctly decompress multiple concatenated compressed
files. 0.1pl2 cannot do this; it will stop after decom-
pressing just the first file in the stream.
releases, versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1,
1.0.2 and 1.0.3, but with the following exception: 0.9.0
and above can correctly decompress multiple concatenated
compressed files. 0.1pl2 cannot do this; it will stop
after decompressing just the first file in the stream.
bzip2recover versions prior to 1.0.2 used 32-bit integers
to represent bit positions in compressed files, so they
......
/*-----------------------------------------------------------*/
/*--- Block recoverer program for bzip2 ---*/
/*--- bzip2recover.c ---*/
/*-----------------------------------------------------------*/
/*--
This program is bzip2recover, a program to attempt data
salvage from damaged files created by the accompanying
bzip2-1.0.3 program.
Copyright (C) 1996-2005 Julian R Seward. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.