Explore projects
-
Sybren A. Stüvel / gcodetool
GNU General Public License v3.0 or laterdr. Sybren's GCode Toolbox. This is a little tool I wrote to make my life easier when milling PCBs.
Updated -
-
Some files (libraries, CAMs,...) for Eagle in 6.4 format
Updated -
-
PCB in surface mount of the Pinguino board based on the microcontroller PIC18F2550
Updated -
PCB in surface mount of the Pinguino board based on the microcontroller PIC18F4550
Updated -
Duke Quantum Center / pcb / ac-trigger
MIT LicenseDesign files for AC Trigger board to convert low-frequency (<1kHz) AC signals to TTL pulse. Used to synchronize experiments to powerline phase.
This project is similar to the Sinara Line_trigger
Updated -
rth. / twilight-switch-PCB
GNU General Public License v3.0 onlya switch based on the light intensity
Updated -
Sergio / Impulse
GNU General Public License v3.0 onlyEstandarización y entorno completo del protocolo Pulse
Updated -
AVRunLocker / hw
GNU General Public License v3.0 or laterHW documentation for AVRunLocker Did you accidentally set wrong fuses and your programmer refuse to communicate with chip? AVRunLocker can easily restore fuses on your AVR, so you can use it again!
Updated -
rth. / RS232-level-shifter-PCB
GNU General Public License v3.0 onlyRS232 to TTL level shifter with line driver UT232A
Updated -
rth. / Control-Shield-Leonardo-PCB
GNU General Public License v3.0 onlycontrol shield for ardunino
Updated -
NhatKhai / PCBFab2Solidwork
GNU General Public License v3.0 onlyExport 3D Model from KiCad or Gerber to SolidWorks. I will add you in as developer if asked (Please do not fork).
Updated -
Houkime / openfc-kicad
TAPR Open Hardware License v1.0A fork of https://github.com/multigcs/openfc flight controller board. Converted to kicad and probably "improved"
Updated -
Nifty PCBs / SMT Breakout Breadboard
CERN Open Hardware Licence v1.2A 'Nifty PCB' to breakout SOT-23 and SOIC parts into through-holes, for easy prototyping. Designed with KiCad.
Updated -
ErgoSL Keyboard / ErgoSL-C PCB
CERN Open Hardware Licence Version 2 - Strongly ReciprocalKiCad hardware design files for the ErgoSL-C keyboard
Updated -
Fan control project for my Raspberry Pi 4 case
Updated -
-
Reinier van der Leer / Metertrekker
GNU General Public License v3.0 onlyDevice to interface with Dutch Smart Meter Requirements (DSMR) compliant energy meters via the P1 port
Updated -
Marcel Krüger / ScapersPi-kicad
TAPR Open Hardware License v1.0A fish tank controller PCB based on the Raspberry Pi
Updated