Explore projects
-
Rainerum Robotics / Marlin
GNU General Public License v3.0 or laterOptimized firmware for RepRap 3D printers based on the Arduino platform. http://www.marlinfw.org/
Updated -
-
eggfly / arduino-esp32
GNU Lesser General Public License v2.1 onlyUpdated -
Schaepher / Arduino Esp32
GNU Lesser General Public License v2.1 onlyUpdated -
Chenny Du / Arduino Esp32
GNU Lesser General Public License v2.1 onlyUpdated -
Daniel P. Berrangé / barndoor
GNU General Public License v2.0 or laterArduino code for controlling a astrophotography barndoor mount
Updated -
Updated
-
-
ESP32 / Arduino firmware as a fast CANbus access gateway for the CanZE app. See Wiki for documentation
Updated -
ESP-IDF template that has Arduino and Bluepad32 built-in.
Updated -
A few arduino sketches I made, nothing too fancy
Updated -
Neo51 is an open source hardware based on 89V51 microcontroller. It has a dual mode feature selectable via DIP switch supporting arduino hardware compatible ports and the legacy 8051 ports.
Updated -
This is a PCB-design + Arduino firmware for an Ethernet-controlled 1:8 RF-multiplexer. It allows selecting as output one of eight input-channels, as commonly used e.g. in timing-laboratories when one wants to measure many RF-sources (clock outputs like 1PPS or 10MHz) with a single instrument (frequency or time-interval counter). The design is for two independent MUX-boards to fit in a 1U 19” rack enclosure. For more information, see the wiki
Updated -
A low cost potentiostat circuit to perform electrochemistry experiments. The system may be driven by a Teensy card from PJRC (Arduino IDE) or by power supplies, More info at the Wiki page
Updated -
A set of sketches to remotely manipulate a LED strip using Arduino Nano RP2040, el Arduino ESP8266, and communication using the OSC protocol.
Updated -
A set of sketches for movement identification using the Machine Learning modules of the Arduino Nano 2040.
Updated -
Basic Embedded/IoT Arduino Hardware Programs for beginners.
Updated -
This project contains the two Arduino sketches that power the Dual Screen Apollo DSKY https://arduinoenigma.blogspot.com/p/dual-screen-apollo-dsky.html
This DSKY works with SerialMoonJS, a modified Apollo Guidance Computer Simulator.
Updated -
A version of https://github.com/siravan/moonjs modified to output the screen status and accept keystrokes from serial port to allow an Arduino based external DSKY to control the simulation. http://svtsim.com/moonjs/agc.html
Updated