STM32
Projects with this topic
-
Raw code for supply with current and voltage regulation
Updated -
Raw version of robohand controller, that recieves data from android device and controlls servos connected to pins
Updated -
Simple STM32 Cube IDE project that blinks led when some data recieved in bluetooth HC-05 module
Updated -
This project implements the FreeRTOS-IO for FreeRTOS-Plus-CLI, this is a port for stm32 mcu from the offical example.
Updated -
Operating System Abstraction Layer for C/C++
Updated -
CMake project with code examples for a Blue-Pill (STM32F103C8) using libopencm3 and FreeRTOS. Upload can be done by using st-flash from texane/stlink
Updated -
CMake project with code examples for a Blue-Pill (STM32F103C8) using libopencm3. Upload can be done by using st-flash from texane/stlink
Updated -
A Nes emulator for stm32 but can be ported to any other MCU :1
Updated -
-
The STM32Cube hardware abstraction layer (HAL) and Low Layer APIs (LL) for STM32H7 family.
Updated -
Run semihosting on STM32 MCU base on OpenOcd and GDB.
Running on STM32F429ZI from Discavery board.
Updated -
Drivers for various 4.0" parallel port lcd display
Updated -
A keyboard numpad and a calculator in the same box
Updated -
Example project for the mfrc522 Rust library with embassy
Updated -
This is repository for university laboratories about Digital Signal Processors Architectures.
Updated -
Driver for ili9486display controller, it was developed using a nucleo board, since it does not have a PMP was needed implement it, it has three ways to send the data, through a bit field, spaming the data over all the GPIO ports, or spreading the data over all the ports using DMA .
Updated -
Driver for ili9341 display controller, it was developed using a nucleo board, since it does not have a PMP was needed implement it, it has two ways to send the data, through a bit field or spaming the data over all the GPIO ports.
Updated