can not open luks disk after reboot
Hello sir's Please help me
Issue description
I have installed cryptsetup on proxmox VE node (it was be about 7.2 version one year ago)
after several runs apt update and apt upgrade during the year
i ran reboot yersterday and can not open Luks crypted disks with my password:
error message "No key available with this passphrase"
both disks after opens was in zfs pool (mirror)
my password is correct because I saved it in a text document.
when I used luksFormat via ssh session I'm copy-past this password.
also after first time crypt disks I'm rebooted this server several times and tested my config - all was fine.
Steps for reproducing the issue
i don't know how to reproduce this
Additional info
cpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 39 bits physical, 48 bits virtual
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 94
Model name: Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz
Stepping: 3
CPU MHz: 3985.666
CPU max MHz: 4000.0000
CPU min MHz: 800.0000
BogoMIPS: 7200.00
Virtualization: VT-x
L1d cache: 128 KiB
L1i cache: 128 KiB
L2 cache: 1 MiB
L3 cache: 8 MiB
NUMA node0 CPU(s): 0-7
Vulnerability Itlb multihit: KVM: Mitigation: Split huge pages
Vulnerability L1tf: Mitigation; PTE Inversion; VMX conditional cache flushes, SMT vulnerable
Vulnerability Mds: Mitigation; Clear CPU buffers; SMT vulnerable
Vulnerability Meltdown: Mitigation; PTI
Vulnerability Mmio stale data: Mitigation; Clear CPU buffers; SMT vulnerable
Vulnerability Retbleed: Mitigation; IBRS
Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Vulnerability Spectre v2: Mitigation; IBRS, IBPB conditional, STIBP conditional, RSB filling, PBRSB-eIBRS Not affected
Vulnerability Srbds: Mitigation; Microcode
Vulnerability Tsx async abort: Mitigation; TSX disabled
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb r
dtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx
smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3
dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 a
vx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp
_act_window hwp_epp md_clear flush_l1d arch_capabilities
disk
info:
/dev/sda1: UUID="005bbcb6-d980-ecea-a369-1f9297a64eba" UUID_SUB="8ad50b26-2ef0-f3d7-37e5-982fe98f8dbf" LABEL="rescue:0" TYPE="linux_raid_member" PARTUUID="05fa12b2-96a2-4136-a163-7ea638448d04" /dev/sda2: UUID="4f44ef96-45a6-5b26-b3f2-92f40c5bba43" UUID_SUB="0b5186f6-0ec3-a027-3c21-c440c44955da" LABEL="rescue:1" TYPE="linux_raid_member" PARTUUID="fb9ace13-10b8-41ef-b606-96421e2afbaa" /dev/sdb1: UUID="005bbcb6-d980-ecea-a369-1f9297a64eba" UUID_SUB="a97b5fe0-ee59-cc97-270c-64931352b724" LABEL="rescue:0" TYPE="linux_raid_member" PARTUUID="56a1990c-c2cd-4e55-8a34-91bebab42fa9" /dev/sdb2: UUID="4f44ef96-45a6-5b26-b3f2-92f40c5bba43" UUID_SUB="386fbdb7-3fd9-6c40-a0ca-cdb4224df1cb" LABEL="rescue:1" TYPE="linux_raid_member" PARTUUID="73ec2900-719a-4110-a2b9-266f268e866f" /dev/sdc: UUID="68044b11-708b-4679-9958-9439c05902a1" TYPE="crypto_LUKS" /dev/sdd: UUID="4ea862e5-65af-4c3d-b119-a5528a165c3e" TYPE="crypto_LUKS" /dev/md0: UUID="dbd3adf9-6f99-4171-81cf-6e883b8461d3" BLOCK_SIZE="4096" TYPE="ext4" /dev/md1: UUID="1eOEeg-ASYA-DPnp-JMD8-96U8-UKfe-2NAUKQ" TYPE="LVM2_member" /dev/mapper/vg0-root: UUID="38edf4b4-3775-4e0e-b706-c9783feb609c" BLOCK_SIZE="4096" TYPE="ext4" /dev/sda3: PARTUUID="7224032b-4bfb-4d63-b294-f0911ef0b89b" /dev/sdb3: PARTUUID="a457821e-aba7-427a-8ab7-e16f280c0861"
smartctl -a /dev/sdc:
smartctl -a /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.108-1-pve] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION === Device Model: TOSHIBA MG08ACA16TEY Serial Number: 4150A1PLFVNG LU WWN Device Id: 5 000039 ad8c8c2fd Firmware Version: 0103 User Capacity: 16,000,900,661,248 bytes [16.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 4 16:46:35 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1472) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8112 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 058 058 000 Old_age Always - 17084 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 23 Unknown_Attribute 0x0023 100 100 075 Pre-fail Always - 0 24 Unknown_Attribute 0x0023 100 100 075 Pre-fail Always - 0 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 71 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 32 (Min/Max 20/53) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 17825793 222 Loaded_Hours 0x0032 059 059 000 Old_age Always - 16714 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 525 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1 ATA Error Count: 7 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7 occurred at disk power-on lifetime: 6488 hours (270 days + 8 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH
04 53 00 00 00 00 40
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
e5 00 00 00 00 00 40 00 00:00:26.856 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.831 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.796 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.671 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.640 CHECK POWER MODE
Error 6 occurred at disk power-on lifetime: 6488 hours (270 days + 8 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH
04 53 00 00 00 00 40
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
e5 00 00 00 00 00 40 00 00:00:26.796 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.671 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.640 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.599 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.554 CHECK POWER MODE
Error 5 occurred at disk power-on lifetime: 6488 hours (270 days + 8 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH
04 53 00 00 00 00 40
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
e5 00 00 00 00 00 40 00 00:00:26.640 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.599 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.554 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.435 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.393 CHECK POWER MODE
Error 4 occurred at disk power-on lifetime: 6488 hours (270 days + 8 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH
04 53 00 00 00 00 40
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
e5 00 00 00 00 00 40 00 00:00:26.554 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.435 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.393 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.367 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.329 CHECK POWER MODE
Error 3 occurred at disk power-on lifetime: 6488 hours (270 days + 8 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH
04 53 00 00 00 00 40
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
e5 00 00 00 00 00 40 00 00:00:26.393 CHECK POWER MODE ec 00 01 00 00 00 40 00 00:00:26.367 IDENTIFY DEVICE e5 00 00 00 00 00 40 00 00:00:26.329 CHECK POWER MODE b4 11 00 70 79 72 00 00 00:00:25.735 SANITIZE DEVICE b4 00 00 00 00 00 00 00 00:00:25.735 SANITIZE DEVICE
SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Extended offline Completed without error 00% 9618 -
2 Extended offline Completed without error 00% 9584 -
3 Short offline Completed without error 00% 6516 -
4 Short offline Completed without error 00% 6514 -
5 Extended offline Completed without error 00% 6514 -
6 Short offline Completed without error 00% 6488 -
7 Short offline Completed without error 00% 2 -
8 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl -a /dev/sdd
smartctl -a /dev/sdd smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.108-1-pve] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION === Device Model: TOSHIBA MG08ACA16TEY Serial Number: Y160A01VFVNG LU WWN Device Id: 5 000039 b48ca4c04 Firmware Version: 0103 User Capacity: 16,000,900,661,248 bytes [16.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 4 16:49:41 2023 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1438) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8072 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 4 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 10570 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4 23 Unknown_Attribute 0x0023 100 100 075 Pre-fail Always - 0 24 Unknown_Attribute 0x0023 100 100 075 Pre-fail Always - 0 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 58 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 29 (Min/Max 23/38) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 33685506 222 Loaded_Hours 0x0032 075 075 000 Old_age Always - 10372 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 532 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1 No Errors Logged
SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Extended offline Completed without error 00% 3102 -
2 Extended offline Completed without error 00% 3068 -
3 Short offline Completed without error 00% 1 -
4 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
pveversion
proxmox-ve: 7.4-1 (running kernel: 5.15.108-1-pve) pve-manager: 7.4-16 (running version: 7.4-16/0f39f621) pve-kernel-5.15: 7.4-4 pve-kernel-5.13: 7.1-9 pve-kernel-5.15.108-1-pve: 5.15.108-2 pve-kernel-5.15.60-1-pve: 5.15.60-1 pve-kernel-5.13.19-6-pve: 5.13.19-15 ceph-fuse: 14.2.21-1 corosync: 3.1.7-pve1 criu: 3.15-1+pve-1 glusterfs-client: 9.2-1 ifupdown: residual config ifupdown2: 3.1.0-1+pmx4 libjs-extjs: 7.0.0-1 libknet1: 1.24-pve2 libproxmox-acme-perl: 1.4.4 libproxmox-backup-qemu0: 1.3.1-1 libproxmox-rs-perl: 0.2.1 libpve-access-control: 7.4.1 libpve-apiclient-perl: 3.2-1 libpve-common-perl: 7.4-2 libpve-guest-common-perl: 4.2-4 libpve-http-server-perl: 4.2-3 libpve-rs-perl: 0.7.7 libpve-storage-perl: 7.4-3 libspice-server1: 0.14.3-2.1 lvm2: 2.03.11-2.1 lxc-pve: 5.0.2-2 lxcfs: 5.0.3-pve1 novnc-pve: 1.4.0-1 proxmox-backup-client: 2.4.3-1 proxmox-backup-file-restore: 2.4.3-1 proxmox-kernel-helper: 7.4-1 proxmox-mail-forward: 0.1.1-1 proxmox-mini-journalreader: 1.3-1 proxmox-widget-toolkit: 3.7.3 pve-cluster: 7.3-3 pve-container: 4.4-6 pve-docs: 7.4-2 pve-edk2-firmware: 3.20230228-4~bpo11+1 pve-firewall: 4.3-5 pve-firmware: 3.6-5 pve-ha-manager: 3.6.1 pve-i18n: 2.12-1 pve-qemu-kvm: 7.2.0-8 pve-xtermjs: 4.16.0-2 qemu-server: 7.4-4 smartmontools: 7.2-pve3 spiceterm: 3.2-2 swtpm: 0.8.0~bpo11+3 vncterm: 1.7-1 zfsutils-linux: 2.1.11-pve1
tested commands when all works fine
cryptsetup luksOpen /dev/sdc crypt1 cryptsetup luksOpen /dev/sdd crypt2 zpool import poolencrypt
Debug log
Output with --debug option:
# cryptsetup 2.3.7 processing "cryptsetup --debug luksOpen /dev/sdc crypt1" # Running command open. # Locking memory. # Installing SIGINT/SIGTERM handler. # Unblocking interruption on signal. # Allocating context for crypt device /dev/sdc. # Trying to open and read device /dev/sdc with direct-io. # Initialising device-mapper backend library. # Trying to load any crypt type from device /dev/sdc. # Crypto backend (OpenSSL 1.1.1n 15 Mar 2022) initialized in cryptsetup library version 2.3.7. # Detected kernel Linux 5.15.108-1-pve x86_64. # Loading LUKS2 header (repair disabled). # Acquiring read lock for device /dev/sdc. # Opening lock resource file /run/cryptsetup/L_8:32 # Verifying lock handle for /dev/sdc. # Device /dev/sdc READ lock taken. # Trying to read primary LUKS2 header at offset 0x0. # Opening locked device /dev/sdc # Veryfing locked device handle (bdev) # LUKS2 header version 2 of size 16384 bytes, checksum sha256. # Checksum:8350e7c6b341c88defe29006db7097547d73c56bf600b9390dc15ce4fa7f0716 (on-disk) # Checksum:8350e7c6b341c88defe29006db7097547d73c56bf600b9390dc15ce4fa7f0716 (in-memory) # Trying to read secondary LUKS2 header at offset 0x4000. # Reusing open ro fd on device /dev/sdc # LUKS2 header version 2 of size 16384 bytes, checksum sha256. # Checksum:2e742ecd400a15259656f01715d67353c7a6d54279becaeaba9469857e0a44a4 (on-disk) # Checksum:2e742ecd400a15259656f01715d67353c7a6d54279becaeaba9469857e0a44a4 (in-memory) # Device size 16000900661248, offset 16777216. # Device /dev/sdc READ lock released. # PBKDF argon2i, time_ms 2000 (iterations 0), max_memory_kb 1048576, parallel_threads 4. # Activating volume crypt1 using token -1. # Interactive passphrase entry requested. Enter passphrase for /dev/sdc: # Activating volume crypt1 [keyslot -1] using passphrase. # dm version [ opencount flush ] [16384] (*1) # dm versions [ opencount flush ] [16384] (*1) # Detected dm-ioctl version 4.45.0. # Device-mapper backend running with UDEV support enabled. # dm status crypt1 [ opencount noflush ] [16384] (*1) # Keyslot 0 priority 1 != 2 (required), skipped. # Trying to open LUKS2 keyslot 0. # Reading keyslot area [0x8000]. # Acquiring read lock for device /dev/sdc. # Opening lock resource file /run/cryptsetup/L_8:32 # Verifying lock handle for /dev/sdc. # Device /dev/sdc READ lock taken. # Reusing open ro fd on device /dev/sdc # Device /dev/sdc READ lock released. # Verifying key from keyslot 0, digest 0. # Digest 0 (pbkdf2) verify failed with -1. No key available with this passphrase. # Interactive passphrase entry requested. Enter passphrase for /dev/sdc: # Activating volume crypt1 [keyslot -1] using passphrase. # dm versions [ opencount flush ] [16384] (*1) # dm status crypt1 [ opencount noflush ] [16384] (*1) # Keyslot 0 priority 1 != 2 (required), skipped. # Trying to open LUKS2 keyslot 0. # Reading keyslot area [0x8000]. # Acquiring read lock for device /dev/sdc. # Opening lock resource file /run/cryptsetup/L_8:32 # Verifying lock handle for /dev/sdc. # Device /dev/sdc READ lock taken. # Reusing open ro fd on device /dev/sdc # Device /dev/sdc READ lock released. # Verifying key from keyslot 0, digest 0. # Digest 0 (pbkdf2) verify failed with -1. No key available with this passphrase. # Interactive passphrase entry requested. Enter passphrase for /dev/sdc: # Activating volume crypt1 [keyslot -1] using passphrase. # dm versions [ opencount flush ] [16384] (*1) # dm status crypt1 [ opencount noflush ] [16384] (*1) # Keyslot 0 priority 1 != 2 (required), skipped. # Trying to open LUKS2 keyslot 0. # Reading keyslot area [0x8000]. # Acquiring read lock for device /dev/sdc. # Opening lock resource file /run/cryptsetup/L_8:32 # Verifying lock handle for /dev/sdc. # Device /dev/sdc READ lock taken. # Reusing open ro fd on device /dev/sdc # Device /dev/sdc READ lock released. # Verifying key from keyslot 0, digest 0. # Digest 0 (pbkdf2) verify failed with -1. No key available with this passphrase. # Releasing crypt device /dev/sdc context. # Releasing device-mapper backend. # Closing read only fd for /dev/sdc. # Unlocking memory. Command failed with code -2 (no permission or bad passphrase).
my luksHeaders
my passwword
to59vtuIc4GdJaXdHCb5_hgc$
anybody help me please to get my data back