Commit a58c985b authored by Lad Prabhakar's avatar Lad Prabhakar Committed by Pavel Machek
Browse files

arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M

commit 66149516

 upstream.

Add support for AISTARVISION MIPI Adapter V2.1 board connected to HiHope
RZ/G2M board.
Signed-off-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: default avatarBiju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20201020125134.22625-4-prabhakar.mahadev-lad.rj@bp.renesas.com

Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
[PL: manually applied changes to Makefile]
Signed-off-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: default avatarPavel Machek <pavel@denx.de>
parent 48f93772
Pipeline #273166880 passed with stages
in 54 minutes and 22 seconds
......@@ -4,7 +4,8 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb \
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb \
r8a774a1-hihope-rzg2m-rev2-ex.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb \
r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb \
r8a774a1-hihope-rzg2m-ex-mipi-2.1.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb \
r8a774b1-hihope-rzg2n-rev2.dtb
dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb \
......
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the HiHope RZ/G2M board
* connected with aistarvision-mipi-v2-adapter board
*
* Copyright (C) 2020 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a774a1-hihope-rzg2m-ex.dts"
#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
/ {
model = "HopeRun HiHope RZ/G2M with sub board connected with aistarvision-mipi-v2-adapter board";
compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
};
/*
* On RZ/G2M SoC LSI V1.3 CSI40 supports only 4 lane mode.
* HiHope RZ/G2M Rev.4.0 board is based on LSI V1.3 so disable csi40 and
* imx219 as the imx219 endpoint driver supports only 2 lane mode.
*/
&csi40 {
status = "disabled";
};
&imx219 {
status = "disabled";
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment