Commit 4a043d79 authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Ralf Baechle

mips: mark const init data with __initconst instead of __initdata

As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt. If there were one however
compilation would fail with

	error: $variablename causes a section type conflict

because a section containing const variables is marked read only and so
cannot contain non-const variables.
Signed-off-by: 's avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel@pengutronix.de
Patchwork: https://patchwork.linux-mips.org/patch/3565/Signed-off-by: 's avatarRalf Baechle <ralf@linux-mips.org>
parent 5520e426
......@@ -79,11 +79,11 @@ static int __init config_pcmcia_cs(unsigned int cs,
return ret;
}
static const __initdata struct {
static const struct {
unsigned int cs;
unsigned int base;
unsigned int size;
} pcmcia_cs[3] = {
} pcmcia_cs[3] __initconst = {
{
.cs = MPI_CS_PCMCIA_COMMON,
.base = BCM_PCMCIA_COMMON_BASE_PA,
......
......@@ -111,7 +111,7 @@ static void __init pci_clock_check(void)
unsigned int __iomem *jmpr_p =
(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
static const int pciclocks[] __initdata = {
static const int pciclocks[] __initconst = {
33, 20, 25, 30, 12, 16, 37, 10
};
int pciclock = pciclocks[jmpr];
......
......@@ -22,13 +22,13 @@
#include <asm/vr41xx/mpc30x.h>
static const int internal_func_irqs[] __initdata = {
static const int internal_func_irqs[] __initconst = {
VRC4173_CASCADE_IRQ,
VRC4173_AC97_IRQ,
VRC4173_USB_IRQ,
};
static const int irq_tab_mpc30x[] __initdata = {
static const int irq_tab_mpc30x[] __initconst = {
[12] = VRC4173_PCMCIA1_IRQ,
[13] = VRC4173_PCMCIA2_IRQ,
[29] = MQ200_IRQ,
......
......@@ -28,7 +28,7 @@
#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x))
const struct register_map calliope_register_map __initdata = {
const struct register_map calliope_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
......
......@@ -28,7 +28,7 @@
#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
const struct register_map cronus_register_map __initdata = {
const struct register_map cronus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
......
......@@ -23,7 +23,7 @@
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
const struct register_map gaia_register_map __initdata = {
const struct register_map gaia_register_map __initconst = {
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
......
......@@ -28,7 +28,7 @@
#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x))
const struct register_map zeus_register_map __initdata = {
const struct register_map zeus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment