Commit cf8301b5 authored by Simon Berka's avatar Simon Berka

init commit

language: c
- "/sbin/start-stop-daemon --start --quiet --pidfile /tmp/ --make-pidfile --background --exec /usr/bin/Xvfb -- :1 -ac -screen 0 1280x1024x16"
- sleep 3
- export DISPLAY=:1.0
- wget
- tar xf arduino-1.6.9-linux64.tar.xz
- sudo mv arduino-1.6.9 /usr/local/share/arduino
- sudo ln -s /usr/local/share/arduino/arduino /usr/local/bin/arduino
- arduino --verify --board arduino:avr:uno $PWD/sketch.ino
\ No newline at end of file
Turns on an LED on for one second, then off for one second, repeatedly.
Most Arduinos have an on-board LED you can control. On the Uno and
Leonardo, it is attached to digital pin 13. If you're unsure what
pin the on-board LED is connected to on your Arduino model, check
the documentation at
This example code is in the public domain.
modified 8 May 2014
by Scott Fitzgerald
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);
// the loop function runs over and over again forever
void loop() {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment