... | @@ -21,7 +21,7 @@ or some way to plug 12V into your navdy cable eg |
... | @@ -21,7 +21,7 @@ or some way to plug 12V into your navdy cable eg |
|
* https://www.amazon.com/SPARKING-Supply-Cigarette-Lighter-Adapter/dp/B078DXVJJK **and** https://www.ebay.com.au/i/202399023203
|
|
* https://www.amazon.com/SPARKING-Supply-Cigarette-Lighter-Adapter/dp/B078DXVJJK **and** https://www.ebay.com.au/i/202399023203
|
|
|
|
|
|
Note: this process will replace the recovery partition with my modified one which has permissions to access the filesystems.
|
|
Note: this process will replace the recovery partition with my modified one which has permissions to access the filesystems.
|
|
This will allow you to backup your boot, data and system partitions which are the more important ones for navdy use generally.
|
|
This will allow you to backup your boot, data and system partitions which are the more important ones for navdy use generally. The modifications only come into play if the navdy is plugged into computer on USB when rebooted into recovery mode. When not plugged into computer during recovery startup, it still works as a normal recovery system for factory resets, updates etc.
|
|
|
|
|
|
|
|
|
|
#### Backup Procedure
|
|
#### Backup Procedure
|
... | @@ -31,9 +31,14 @@ This will allow you to backup your boot, data and system partitions which are th |
... | @@ -31,9 +31,14 @@ This will allow you to backup your boot, data and system partitions which are th |
|
3. Plug a usb cable into the back of the navdy, but don't plug into computer yet.
|
|
3. Plug a usb cable into the back of the navdy, but don't plug into computer yet.
|
|
4. Put the navdy into the car cradle / power supply and wait for it to start up normally.
|
|
4. Put the navdy into the car cradle / power supply and wait for it to start up normally.
|
|
5. Plug the USB cable into computer
|
|
5. Plug the USB cable into computer
|
|
6. Run `FLASH_RECOVERY_WIN` (if running windows) or `FLASH_RECOVERY_OSX_LINUX` (if running mac or linux) and wait for it to complete.
|
|
6. If running windows, run `WIN_INSTALL_USB_DRIVER` to ensure the Android ADB driver is installed.
|
|
7. If you get stuck at "Rebooting to recovery, screen should stay black." for more than 10 seconds, check the light on the navdy hasn't come on green. If it has, unplug the usb and remove from cradle and start again. If it continues to happen get in touch on reddit or an issue on this project.
|
|
7. Run `FLASH_RECOVERY_WIN` (if running windows) or `FLASH_RECOVERY_OSX_LINUX` (if running mac or linux) and wait for it to complete.
|
|
8. Once the FLASH_RECOVERY script is finished, the screen on the navdy should look blank but the light on the front should be white.
|
|
This will reboot into bootloader mode, install my recovery image, then boot into the modified recovery environment.
|
|
9. Run `BACKUP_NAVDY_WIN` or `BACKUP_NAVDY_OSX_LINUX`, this should copy the `system`, `data` and `boot` partitions to a file on the unit, then copy that file to the local folder on your computer.
|
|
8. If you get stuck at "Rebooting to recovery, screen should stay black." for more than 10-20 seconds, check the light on the navdy hasn't come on green.
|
|
10. Once that's finished, you can simply unplug the navdy from computer and car cradle, leave it off until the front light turns off, then plug it back in. It should boot up again in normal mode.
|
|
If it has, unplug the usb and remove from cradle, wait for light to go off, then start again. If it continues to happen get in touch on reddit or raise an issue on this project.
|
|
11. If the version of navdy you've backed up is not one of mine, or different to 3049, I'd be very interested in a copy of the `boot` and `system` partitions (only `data` has user information on it). Please do get in touch with me to let me know! |
|
9. Once the FLASH_RECOVERY script is finished, the screen on the navdy should look blank but the light on the front should be white.
|
|
|
|
10. Run `BACKUP_NAVDY_WIN` or `BACKUP_NAVDY_OSX_LINUX`, this should copy the `system`, `data` and `boot` partitions to a file on the unit, then copy that file to the local folder on your computer.
|
|
|
|
11. Once that's finished, you can simply unplug the navdy from computer and car cradle, leave it off until the front light turns off, then put it back on the car cradle. It should boot up again in normal mode like nothing happened.
|
|
|
|
|
|
|
|
|
|
|
|
If the version of navdy you've backed up is not one of mine or the original navdy 3049 build, I'd be very interested in a copy of the `boot` and `system` partitions (only `data` has user information on it). Please do get in touch with me to let me know! |