Raspberry Pi 3 Model B+ wired interface and 3-in-1 use
Max - I hope this is the (new for me) correct place to ask a question (I used the list server in the past, but it appears to be gone now).
I've been using the Acuparse successfully for a while now and decided to a refresh. I got the new OS and Acuparse software loaded, but I have some issues.
-
I'm using my firewall to handle HUBAPI.MYACURITE.COM, so I did not load/install dnsmasq. Everything is working fine on the wi-fi port of my P1 3 B+, but I would like to use the wired Ethernet port instead of the wi-fi port. I didn't notice where that's configured. Can you help point me in the right direction?
-
I have a 5-in-1 and SmartHUB as my primary sensor - looks to be working great! I also have a 3-in-1 that I use for my temperature and humidity. I added it to the tower section, but Acuparse isn't picking it up as a tower. I see in /var/log/syslog:
Dec 27 16:37:19 raspberrypi acuparse(2.10.0-release): (HUB)[ERROR]: Unknown Sensor 00008402. Raw = dateutc=now&action=updateraw&realtime=1&id=24C86E06AB97&mt=3N1x20&sensor=00008402&humidity=96&tempf=48.0&windspeedmph=0&baromin=28.74&battery=normal&rssi=2
Is this because it isn't an Acurite "tower", or did I not configure something correctly?
Thanks, Joe