Fair enough. But it sounds like an “impedance mismatch” between your code and some op sys code? Maybe this could be raised as an issue “there”?
But then, it doesn't come with the full page data I gave it, like Title. But I'd just assume the big copy/paste didn't include it.
That error is the same as the one that appears if/since you ask me. At least I haven't been able to distill them away from each other.
Edit: I also saw that but didn't pay any attention to it. When it's opened like in the movie, the full page does not appear - but when it's opened stand-alone on the desktop it comes with all included!
I guess bright observation tightens the net here!?
Wouldn't these be equal? I mean: contain the same info?
It may be of interest that paulvdh made a full version of my circuit diagram that doesn't give this error message. It's here. But then, making any new version by copy/pasting in the one that causes this error yields a version without this error message.
EDIT: NO! NOT ALWAYS!
If I tried to duplicate (with Finder) my Beep_BRRR directory with all files in, to Beep_BRRR_2, and then copied the paulvdh file across and overwrote the original Beep_BRRR.kicad_sch, and opened it either with the KiCad browser or directly with eeschema with Finder, the error message appeared again!
Also, if I copied that file out of the Beep_BRRR_2 and over to the desktop, with no surrounding directory, IT OPENED FINE by eesschema from Finder.
eeschema perhaps picks up some clue from that directory? Here it is: Beep_BRRR_2.zip
I converted a huge 4k .mov to a small .mp4 with Handbrake.
I don't know why I pressed the pcb file first, but it doesn't make any difference.
I will make a screen movie in a minute. But if this were related to Mojave, then I think it strange that it only appeared quite many edits and days into the session. (I knew that you officially don't support it any more (I commented on that in an earlier issue), but it kind of felt like it wasn't that well rationaled why Mojave wasn't supported.) (I have a Mac Mini with newer OS, I could try in a day or two (this is my work-iMac)).
Here's a log from the case when eeschema opens and shows this error message. My macOS version is shown in the first post (above). I am not certain whether the SIGKILL messages are relevant here, as the log is full of them, also before this entry.
28. mar. 2022, 10:02:13 kicad[18159]: objc[18159]: Class FIFinderSyncExtensionHost is implemented in both /System/Library/PrivateFrameworks/FinderKit.framework/Versions/A/FinderKit (0x7fff9fa273f0) and /System/Library/PrivateFrameworks/FileProvider.framework/OverrideBundles/FinderSyncCollaborationFileProviderOverride.bundle/Contents/MacOS/FinderSyncCollaborationFileProviderOverride (0x113a92f50). One of the two will be used. Which one is undefined.
28. mar. 2022, 10:02:13 kicad[18159]: assertion failed: 18G9323: libxpc.dylib + 90649 [404F0E1A-30BC-3CFB-98D3-4A2167CC2AB8]: 0x89
28. mar. 2022, 10:02:13 com.apple.xpc.launchd[1]: Caller wanted oneshot behavior for pre-existing instance: caller = kicad
28. mar. 2022, 10:02:14 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:14 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:14 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:14 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:14 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:15 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:15 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:15 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:15 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:15 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:15 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:15 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:02:44 com.apple.xpc.launchd[1]: Service exited due to SIGKILL | sent by mds[84]
28. mar. 2022, 10:03:01 com.apple.xpc.launchd[1]: Unknown key for integer: _DirtyJetsamMemoryLimit
When I press 'OK' there are no more log lines coming in.
There is still something going on at the forum thread.
Maybe that text from the bot could have been more precise, thinking it over, I did see it. And I did edit the description with a new updated information. Only I didn't edit the original text as @jeffyoung pointed out.
"Please edit/update THE INITIAL description of this report with the updated information (like version info) with any new information."
That would have avoided me involving any feelings.
Observe that this error report happened after I had edited ok for several days, and I couldn't tell you what I might have done.
..sorry, I obviously didn't see that. Didn't see the tree for the forest as we say here. I guess you'd say I did much ado about nothing..
If you mean in macOS, then for Norway it says money is shown like kr. 4 567,89 and the calculator only understands comma as decimal comma, not point. (Closing for the day now).
Edit: with 6.0.4-0 here.
When opening this file, all of a sudden, caused by what - I have no idea - I get the "unexpected version" for a perfectly fine version description.Beep_BRRR.kicad_sch
This issue has been extensively discussed at Error on load: Unexpected version.
Application: KiCad Schematic Editor
Version: (6.0.4-0), release build
Libraries:
wxWidgets 3.1.5
libcurl/7.54.0 LibreSSL/2.6.5 zlib/1.2.11 nghttp2/1.24.1
Platform: macOS Mojave Version 10.14.6 (Build 18G9323), 64 bit, Little endian, wxMac
Build Info:
Date: Mar 17 2022 21:21:05
wxWidgets: 3.1.5 (wchar_t,wx containers)
Boost: 1.78.0
OCC: 7.6.1
Curl: 7.64.1
ngspice: 35
Compiler: Clang 12.0.0 with C++ ABI 1002
Build settings:
KICAD_USE_OCC=ON
KICAD_SPICE=ON
Thanks! (Aside: But a human that tells me a bot is stupid when the bot has been allowed to rule..)
I instead tried to make a new issue: #11257 (closed).
I didn't know about how to please the bot. If you could close 11257 for me then, and perhaps keep this open, please do.
Edit: with 6.0.4-0 here.
When opening this file, all of a sudden, caused by what - I have no idea - I get the "unexpected version" for a perfectly fine version description.Beep_BRRR.kicad_sch
This issue has been extensively discussed at Error on load: Unexpected version.
Application: KiCad Schematic Editor
Version: (6.0.4-0), release build
Libraries:
wxWidgets 3.1.5
libcurl/7.54.0 LibreSSL/2.6.5 zlib/1.2.11 nghttp2/1.24.1
Platform: macOS Mojave Version 10.14.6 (Build 18G9323), 64 bit, Little endian, wxMac
Build Info:
Date: Mar 17 2022 21:21:05
wxWidgets: 3.1.5 (wchar_t,wx containers)
Boost: 1.78.0
OCC: 7.6.1
Curl: 7.64.1
ngspice: 35
Compiler: Clang 12.0.0 with C++ ABI 1002
Build settings:
KICAD_USE_OCC=ON
KICAD_SPICE=ON
Se Error on load: Unexpected version. I am afraid it was closed on false premises. I did download 6.0.4 as the bot suggested, and the error still exists.
Please tell me how to have this reported, or tell me to give ut up, some non-bot physical being!
This is not motivating me to spend time reporting issues, or to continue using KiCad for that sake.
Application: KiCad Schematic Editor
Version: (6.0.4-0), release build
Libraries:
wxWidgets 3.1.5
libcurl/7.54.0 LibreSSL/2.6.5 zlib/1.2.11 nghttp2/1.24.1
Platform: macOS Mojave Version 10.14.6 (Build 18G9323), 64 bit, Little endian, wxMac
Build Info:
Date: Mar 17 2022 21:21:05
wxWidgets: 3.1.5 (wchar_t,wx containers)
Boost: 1.78.0
OCC: 7.6.1
Curl: 7.64.1
ngspice: 35
Compiler: Clang 12.0.0 with C++ ABI 1002
Build settings:
KICAD_USE_OCC=ON
KICAD_SPICE=ON
Come on, bot! I did install 6.0.4 and it still exists! Why then close it?
Edit: with 6.0.4-0 here.
When opening this file, all of a sudden, caused by what - I have no idea - I get the "unexpected version" for a perfectly fine version description.Beep_BRRR.kicad_sch
This issue has been extensively discussed at Error on load: Unexpected version.
Application: KiCad Schematic Editor
Version: (6.0.4-0), release build
Libraries:
wxWidgets 3.1.5
libcurl/7.54.0 LibreSSL/2.6.5 zlib/1.2.11 nghttp2/1.24.1
Platform: macOS Mojave Version 10.14.6 (Build 18G9323), 64 bit, Little endian, wxMac
Build Info:
Date: Mar 17 2022 21:21:05
wxWidgets: 3.1.5 (wchar_t,wx containers)
Boost: 1.78.0
OCC: 7.6.1
Curl: 7.64.1
ngspice: 35
Compiler: Clang 12.0.0 with C++ ABI 1002
Build settings:
KICAD_USE_OCC=ON
KICAD_SPICE=ON
This error still exists on this install:
Application: KiCad Schematic Editor
Version: (6.0.4-0), release build
Libraries:
wxWidgets 3.1.5
libcurl/7.54.0 LibreSSL/2.6.5 zlib/1.2.11 nghttp2/1.24.1
Platform: macOS Mojave Version 10.14.6 (Build 18G9323), 64 bit, Little endian, wxMac
Build Info:
Date: Mar 17 2022 21:21:05
wxWidgets: 3.1.5 (wchar_t,wx containers)
Boost: 1.78.0
OCC: 7.6.1
Curl: 7.64.1
ngspice: 35
Compiler: Clang 12.0.0 with C++ ABI 1002
Build settings:
KICAD_USE_OCC=ON
KICAD_SPICE=ON