...
 
Commits (4)

Too many changes to show.

To preserve performance only 1000 of 1000+ files are displayed.

......@@ -262,7 +262,7 @@ menu "Target Images"
int "Kernel partition size (in MB)"
depends on GRUB_IMAGES || USES_BOOT_PART
default 8 if TARGET_apm821xx_sata
default 64 if TARGET_brcm2708
default 64 if TARGET_bcm27xx
default 16
config TARGET_ROOTFS_PARTSIZE
......
......@@ -550,7 +550,7 @@ if KERNEL_CGROUPS
config KERNEL_BLK_DEV_THROTTLING
bool "Enable throttling policy"
default y if TARGET_brcm2708
default y if TARGET_bcm27xx
config KERNEL_BLK_DEV_THROTTLING_LOW
bool "Block throttling .low limit interface support (EXPERIMENTAL)"
......
......@@ -40,7 +40,7 @@ boot() {
/sbin/kmodloader
[ ! -f /etc/config/wireless ] && {
# compat for brcm47xx and mvebu
# compat for bcm47xx and mvebu
sleep 1
}
......
......@@ -34,7 +34,7 @@ endef
define Package/cypress-nvram-43430-sdio-rpi-3b
$(Package/cypress-nvram-default)
TITLE:=CYW43430 NVRAM for Raspberry Pi 3B
DEPENDS:=@TARGET_brcm2708
DEPENDS:=@TARGET_bcm27xx
endef
define Package/cypress-nvram-43430-sdio-rpi-3b/install
......@@ -50,7 +50,7 @@ $(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-3b))
define Package/cypress-nvram-43430-sdio-rpi-zero-w
$(Package/cypress-nvram-default)
TITLE:=CYW43430 NVRAM for Raspberry Pi Zero W
DEPENDS:=@TARGET_brcm2708
DEPENDS:=@TARGET_bcm27xx
endef
define Package/cypress-nvram-43430-sdio-rpi-zero-w/install
......@@ -66,7 +66,7 @@ $(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-zero-w))
define Package/cypress-nvram-43455-sdio-rpi-3b-plus
$(Package/cypress-nvram-default)
TITLE:=CYW43455 NVRAM for Raspberry Pi 3B+
DEPENDS:=@TARGET_brcm2708
DEPENDS:=@TARGET_bcm27xx
endef
define Package/cypress-nvram-43455-sdio-rpi-3b-plus/install
......@@ -82,7 +82,7 @@ $(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-3b-plus))
define Package/cypress-nvram-43455-sdio-rpi-4b
$(Package/cypress-nvram-default)
TITLE:=CYW43455 NVRAM for Raspberry Pi 4B
DEPENDS:=@TARGET_brcm2708
DEPENDS:=@TARGET_bcm27xx
endef
define Package/cypress-nvram-43455-sdio-rpi-4b/install
......
......@@ -8,7 +8,7 @@
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=brcm2708-gpu-fw
PKG_NAME:=bcm27xx-gpu-fw
PKG_VERSION:=2020-01-30
PKG_RELEASE:=63bdbe0ea609a69f5c0a2212d608ef3d9915a7ad
......@@ -133,16 +133,16 @@ define Download/start4x_elf
endef
$(eval $(call Download,start4x_elf))
define Package/brcm2708-gpu-fw
define Package/bcm27xx-gpu-fw
SECTION:=boot
CATEGORY:=Boot Loaders
DEPENDS:=@TARGET_brcm2708
TITLE:=brcm2708-gpu-fw
DEFAULT:=y if TARGET_brcm2708
DEPENDS:=@TARGET_bcm27xx
TITLE:=bcm27xx-gpu-fw
DEFAULT:=y if TARGET_bcm27xx
endef
define Package/brcm2708-gpu-fw/description
GPU and kernel boot firmware for brcm2708.
define Package/bcm27xx-gpu-fw/description
GPU and kernel boot firmware for bcm27xx.
endef
define Build/Prepare
......@@ -168,7 +168,7 @@ define Build/Compile
true
endef
define Package/brcm2708-gpu-fw/install
define Package/bcm27xx-gpu-fw/install
true
endef
......@@ -189,4 +189,4 @@ define Build/InstallDev
$(CP) $(PKG_BUILD_DIR)/fixup4x.dat $(KERNEL_BUILD_DIR)
endef
$(eval $(call BuildPackage,brcm2708-gpu-fw))
$(eval $(call BuildPackage,bcm27xx-gpu-fw))
......@@ -34,13 +34,13 @@ define Package/broadcom-wl/Default
CATEGORY:=Kernel modules
DEPENDS:=@(PACKAGE_kmod-brcm-wl||PACKAGE_kmod-brcm-wl-mini)
SUBMENU:=Proprietary BCM43xx WiFi driver
SUBMENUDEP:=(TARGET_brcm47xx||TARGET_brcm63xx)
SUBMENUDEP:=(TARGET_bcm47xx||TARGET_bcm63xx)
endef
define KernelPackage/brcm-wl/Default
$(call Package/broadcom-wl/Default)
SECTION:=kernel
DEPENDS:=@(TARGET_brcm47xx||TARGET_brcm63xx) +wireless-tools
DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm63xx) +wireless-tools
TITLE:=Kernel driver for BCM43xx chipsets
FILES:=$(PKG_BUILD_DIR)/driver$(1)/wl.ko $(PKG_BUILD_DIR)/glue/wl_glue.ko
AUTOLOAD:=$(call AutoProbe,wl)
......
......@@ -125,7 +125,7 @@ $(eval $(call KernelPackage,mii))
define KernelPackage/mdio-gpio
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:= Supports GPIO lib-based MDIO busses
DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_brcm2708_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
KCONFIG:= \
CONFIG_MDIO_BITBANG \
CONFIG_MDIO_GPIO
......@@ -320,7 +320,7 @@ $(eval $(call KernelPackage,switch-rtl8306))
define KernelPackage/switch-rtl8366-smi
SUBMENU:=$(NETWORK_DEVICES_MENU)
TITLE:=Realtek RTL8366 SMI switch interface support
DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_brcm2708_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
KCONFIG:=CONFIG_RTL8366_SMI
FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8366_smi.ko
AUTOLOAD:=$(call AutoLoad,42,rtl8366_smi)
......@@ -704,7 +704,7 @@ $(eval $(call KernelPackage,ixgbevf))
define KernelPackage/b44
TITLE:=Broadcom 44xx driver
KCONFIG:=CONFIG_B44
DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx_mips74k +!TARGET_brcm47xx:kmod-ssb +kmod-mii +kmod-libphy
DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx_mips74k +!TARGET_bcm47xx:kmod-ssb +kmod-mii +kmod-libphy
SUBMENU:=$(NETWORK_DEVICES_MENU)
FILES:=$(LINUX_DIR)/drivers/net/ethernet/broadcom/b44.ko
AUTOLOAD:=$(call AutoLoad,19,b44,1)
......@@ -759,7 +759,7 @@ define KernelPackage/tg3
TITLE:=Broadcom Tigon3 Gigabit Ethernet
KCONFIG:=CONFIG_TIGON3 \
CONFIG_TIGON3_HWMON=n
DEPENDS:=+!TARGET_brcm47xx:kmod-libphy +kmod-ptp
DEPENDS:=+!TARGET_bcm47xx:kmod-libphy +kmod-ptp
SUBMENU:=$(NETWORK_DEVICES_MENU)
FILES:=$(LINUX_DIR)/drivers/net/ethernet/broadcom/tg3.ko
AUTOLOAD:=$(call AutoLoad,19,tg3,1)
......
......@@ -418,7 +418,7 @@ $(eval $(call KernelPackage,softdog))
define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
TITLE:=Silicon Sonics Backplane glue code
DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm63xx
KCONFIG:=\
CONFIG_SSB \
CONFIG_SSB_B43_PCI_BRIDGE=y \
......@@ -444,7 +444,7 @@ $(eval $(call KernelPackage,ssb))
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
......
......@@ -274,8 +274,8 @@ define KernelPackage/usb-ohci
TITLE:=Support for OHCI controllers
DEPENDS:= \
+TARGET_bcm53xx:kmod-usb-bcma \
+TARGET_brcm47xx:kmod-usb-bcma \
+TARGET_brcm47xx:kmod-usb-ssb
+TARGET_bcm47xx:kmod-usb-bcma \
+TARGET_bcm47xx:kmod-usb-ssb
KCONFIG:= \
CONFIG_USB_OHCI \
CONFIG_USB_OHCI_HCD \
......@@ -322,7 +322,7 @@ $(eval $(call KernelPackage,usb-ohci-pci))
define KernelPackage/usb-bcma
TITLE:=Support for BCMA USB controllers
DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx||TARGET_bcm53xx
DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx||TARGET_bcm53xx
HIDDEN:=1
KCONFIG:=CONFIG_USB_HCD_BCMA
FILES:= \
......@@ -345,7 +345,7 @@ $(eval $(call KernelPackage,usb-fotg210))
define KernelPackage/usb-ssb
TITLE:=Support for SSB USB controllers
DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx
HIDDEN:=1
KCONFIG:=CONFIG_USB_HCD_SSB
FILES:= \
......@@ -370,8 +370,8 @@ $(eval $(call KernelPackage,usb-ehci))
define KernelPackage/usb2
TITLE:=Support for USB2 controllers
DEPENDS:=\
+TARGET_brcm47xx:kmod-usb-bcma \
+TARGET_brcm47xx:kmod-usb-ssb \
+TARGET_bcm47xx:kmod-usb-bcma \
+TARGET_bcm47xx:kmod-usb-ssb \
+TARGET_bcm53xx:kmod-usb-bcma \
+TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
+TARGET_ath79:kmod-phy-ath79-usb \
......
......@@ -118,14 +118,14 @@ define KernelPackage/b43/config
config PACKAGE_B43_USE_SSB
select PACKAGE_kmod-ssb
tristate
depends on !TARGET_brcm47xx && !TARGET_brcm63xx
depends on !TARGET_bcm47xx && !TARGET_bcm63xx
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
config PACKAGE_B43_USE_BCMA
select PACKAGE_kmod-bcma
tristate
depends on !TARGET_brcm47xx && !TARGET_bcm53xx
depends on !TARGET_bcm47xx && !TARGET_bcm53xx
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
......@@ -205,8 +205,8 @@ config PACKAGE_B43_USE_BCMA
config B43_FW_SQUASH_COREREVS
string "Core revisions to include"
depends on B43_FW_SQUASH
default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
default "16,28,29,30" if TARGET_brcm47xx_mips74k
default "5,6,7,8,9,10,11,13,15" if TARGET_bcm47xx_legacy
default "16,28,29,30" if TARGET_bcm47xx_mips74k
default "5,6,7,8,9,10,11,13,15,16,28,29,30"
help
This is a comma seperated list of core revision numbers.
......@@ -220,8 +220,8 @@ config PACKAGE_B43_USE_BCMA
config B43_FW_SQUASH_PHYTYPES
string "PHY types to include"
depends on B43_FW_SQUASH
default "G,N,LP" if TARGET_brcm47xx_legacy
default "N,HT" if TARGET_brcm47xx_mips74k
default "G,N,LP" if TARGET_bcm47xx_legacy
default "N,HT" if TARGET_bcm47xx_mips74k
default "G,N,LP,HT"
help
This is a comma seperated list of PHY types:
......@@ -248,15 +248,15 @@ config PACKAGE_B43_USE_BCMA
This allows choosing buses that b43 should support.
config PACKAGE_B43_BUSES_BCMA_AND_SSB
depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
depends on !TARGET_bcm47xx_legacy && !TARGET_bcm47xx_mips74k && !TARGET_bcm53xx
bool "BCMA and SSB"
config PACKAGE_B43_BUSES_BCMA
depends on !TARGET_brcm47xx_legacy
depends on !TARGET_bcm47xx_legacy
bool "BCMA only"
config PACKAGE_B43_BUSES_SSB
depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
depends on !TARGET_bcm47xx_mips74k && !TARGET_bcm53xx
bool "SSB only"
endchoice
......@@ -281,7 +281,7 @@ config PACKAGE_B43_USE_BCMA
config PACKAGE_B43_PHY_G
bool "Enable support for G-PHYs"
default n if TARGET_brcm47xx_mips74k
default n if TARGET_bcm47xx_mips74k
default y
help
Enable support for G-PHY. This includes support for the following devices:
......@@ -304,7 +304,7 @@ config PACKAGE_B43_USE_BCMA
config PACKAGE_B43_PHY_LP
bool "Enable support for LP-PHYs"