mirror-help/bioc.md

@@ -13,14 +13,14 @@
 `source("https://bioconductor.org/biocLite.R")`
 或`install.packages('BioInstaller')`
 3. 打开 `BioC_mirrors.csv` 文件，文件路径为`R安装路径/doc/BioC_mirrors.csv` 将下列语句粘贴在文件末尾
-`China (Xi'an) [https],China,Xi'an,https://linux.xidian.edu.cn/mirrors/bioc/,"Xidian University","Xidian University Open Source Community",1,cn`
+`China (Xi'an),China,Xi'an,http://linux.xidian.edu.cn/mirrors/bioc/,"Xidian University","Xidian University Open Source Community",1,cn`
 4. 在R语言环境下运行 `chooseBioCmirror(local.only=T)`，（注意参数不可省略），选择“8: (other mirrors)”后，出现 “9: China (Xi'an) [https]”，则为开源社区的镜像
 
 # 超算中心（无外网时）重置镜像路径
 1. 打开 `BioC_mirrors.csv` 文件，文件路径为`R安装路径/doc/BioC_mirrors.csv` 将下列语句粘贴在文件末尾
-`China (Xi'an) [https],China,Xi'an,https://202.117.120.246/mirrors/bioc/,"Xidian University","Xidian University Open Source Community",1,cn`
+`China (Xi'an),China,Xi'an,http://202.117.120.246/mirrors/bioc/,"Xidian University","Xidian University Open Source Community",1,cn`
 2. 打开 `CRAN_mirrors.csv` 文件，文件路径为`R安装路径/doc/BioC_mirrors.csv` 将下列语句粘贴在文件末尾
-`"China (Xi'an) [https]",China,Xi'an,https://202.117.120.246/mirrors/CRAN/,"Xidian University","Xidian University Open Source Community",1,cn`
+`"China (Xi'an)",China,Xi'an,http://202.117.120.246/mirrors/CRAN/,"Xidian University","Xidian University Open Source Community",1,cn`
 > 202.117.120.246为 linux.xidian.edu.cn所对应的ip地址
 3. 安装所需的包时，先运行`chooseCRANmirror(local.only=T)` 和 `chooseBioCmirror(local.only=T)`，分别选择“China (Xi'an)”作为所用源，即可使用开源社区的镜像
 4. 当前问题是，超算中心无法正常安装BioInstaller包。