code review (codespell)

parent 33df6ba2
...@@ -29,7 +29,7 @@ between. For more detailed information see the or git log. ...@@ -29,7 +29,7 @@ between. For more detailed information see the or git log.
- #196 (nx-rc): fixup 'lastexit' value storing [Mingye Wang] - #196 (nx-rc): fixup 'lastexit' value storing [Mingye Wang]
- #197 (nano) (vim) (readline) (keybindings): fixup file - #197 (nano) (vim) (readline) (keybindings): fixup file
existence checks which are intented to prevent file conflicts existence checks which are intended to prevent file conflicts
when multiple Bash sessions are started at the same time when multiple Bash sessions are started at the same time
[Mingye Wang] [Mingye Wang]
......
...@@ -64,7 +64,7 @@ Overview of changes in v9.1 "Dial T for TNT" ...@@ -64,7 +64,7 @@ Overview of changes in v9.1 "Dial T for TNT"
- trap - trap
- PROMPT_COMMAND - PROMPT_COMMAND
for not overriding the useful info with useless, aswell as for: for not overriding the useful info with useless, as well as for:
- echo ${lastcommand} - echo ${lastcommand}
- echo ${lastcommandprintable} - echo ${lastcommandprintable}
...@@ -95,7 +95,7 @@ Overview of changes in v9.1 "Dial T for TNT" ...@@ -95,7 +95,7 @@ Overview of changes in v9.1 "Dial T for TNT"
=== Bash Settings === === Bash Settings ===
* add GLOBIGNORE: everything to ignore from globbing. Default value: empty. * add GLOBIGNORE: everything to ignore from globbing. Default value: empty.
++ if you set it to ".:.." issueing '$ ls .*' will not include '.' and '..' ++ if you set it to ".:.." issuing '$ ls .*' will not include '.' and '..'
* add History Sync: sync history between simultaneously running sessions. * add History Sync: sync history between simultaneously running sessions.
++ commands from other sessions become available to 'history' immediately, ++ commands from other sessions become available to 'history' immediately,
...@@ -305,7 +305,7 @@ Overview of changes in v9.0 "A New Wave" ...@@ -305,7 +305,7 @@ Overview of changes in v9.0 "A New Wave"
but not applied, so it (or changes to it) took until the second new but not applied, so it (or changes to it) took until the second new
Bash session after program run to make readline configuration apply) Bash session after program run to make readline configuration apply)
* #184 (make): * #184 (make):
fix desktop file not beeing installed fix desktop file not being installed
* #185 (configure): * #185 (configure):
properly check for python version (was confused by version longer than properly check for python version (was confused by version longer than
four digits, for example 2.7.10 which translated to 2710) four digits, for example 2.7.10 which translated to 2710)
...@@ -351,7 +351,7 @@ Overview of changes in v9.0 "A New Wave" ...@@ -351,7 +351,7 @@ Overview of changes in v9.0 "A New Wave"
==== Improved Shell Functions ==== ==== Improved Shell Functions ====
* lscd: various improvements. If a file is passed as arguement to lscd, * lscd: various improvements. If a file is passed as argument to lscd,
it will cd into the containing directory. New optional setting lscd_mkdir, it will cd into the containing directory. New optional setting lscd_mkdir,
if True lscd will create the directory if it does not exist (or if it's if True lscd will create the directory if it does not exist (or if it's
not a file which's directory we can cd into or not an -* cd parameter). not a file which's directory we can cd into or not an -* cd parameter).
...@@ -366,12 +366,12 @@ Overview of changes in v9.0 "A New Wave" ...@@ -366,12 +366,12 @@ Overview of changes in v9.0 "A New Wave"
==== New Shell Functions ==== ==== New Shell Functions ====
* loop function: loop for a colon-divided list (eg. PATH) and return * loop function: loop for a colon-divided list (eg. PATH) and return
the full path if the second arguement is found inside any member of the full path if the second argument is found inside any member of
the colon-divided list (similar to which, but for any provided list the colon-divided list (similar to which, but for any provided list
and both files and directories) and both files and directories)
* reload function: a clean function to reload .bashrc (x2cd) * reload function: a clean function to reload .bashrc (x2cd)
* quickscript function: writes all commands in history to a file. * quickscript function: writes all commands in history to a file.
starting point is the last occurence of "###" (joedhon) starting point is the last occurrence of "###" (joedhon)
* ngroups function: system default 'groups' lists all user-groups you're in * ngroups function: system default 'groups' lists all user-groups you're in
ngroups lists all user-groups you're NOT in. (gniourf_gniourf) ngroups lists all user-groups you're NOT in. (gniourf_gniourf)
* psgrep function: find process by name (flatcap) * psgrep function: find process by name (flatcap)
...@@ -842,7 +842,7 @@ to try them out pass `--dirinfo-enable' to the configure script. ...@@ -842,7 +842,7 @@ to try them out pass `--dirinfo-enable' to the configure script.
+ when filetype indention is enabled, also enable autoindent + when filetype indention is enabled, also enable autoindent
+ when filetype indention is enabled, also enable smartindent + when filetype indention is enabled, also enable smartindent
+ set linespace to 0 + set linespace to 0
+ load $HOME/.vimrc.custom if availabe (put your stuff here) + load $HOME/.vimrc.custom if available (put your stuff here)
* colorshell: changes the color for the shell output after each command * colorshell: changes the color for the shell output after each command
...@@ -1015,7 +1015,7 @@ Overview of changes in v7.11 "I Shot The Blender" ...@@ -1015,7 +1015,7 @@ Overview of changes in v7.11 "I Shot The Blender"
* mkchangelog function (generates ChangeLog from git log) * mkchangelog function (generates ChangeLog from git log)
=== Bugfixes === === Bugfixes ===
* #98: support spaces in arguements for all functions * #98: support spaces in arguments for all functions
* #99: errornous output in showspace * #99: errornous output in showspace
* #100: make sure to use \$ rather than $ in all styles * #100: make sure to use \$ rather than $ in all styles
* #101: correctly get (and therefore log) the bash patch-level * #101: correctly get (and therefore log) the bash patch-level
...@@ -1055,7 +1055,7 @@ Overview of changes in v7.11 "I Shot The Blender" ...@@ -1055,7 +1055,7 @@ Overview of changes in v7.11 "I Shot The Blender"
* listing all files in lo function * listing all files in lo function
* listing all files in lg function * listing all files in lg function
* support for multiple arguements in lm function * support for multiple arguments in lm function
* First-run-wizard (sets up several options for functions) * First-run-wizard (sets up several options for functions)
......
...@@ -62,9 +62,9 @@ bashstyle-ng (8.3-1nano) unstable; urgency=low ...@@ -62,9 +62,9 @@ bashstyle-ng (8.3-1nano) unstable; urgency=low
* New upstream stable release * New upstream stable release
* Upstream changes: * Upstream changes:
* fix 143 (make): dont enforce make install/uninstall to * fix 143 (make): don't enforce make install/uninstall to
be run as root (prevents building rpm packages) be run as root (prevents building rpm packages)
* fix 144 (docs): dont auto-install docs like AUTHORS, * fix 144 (docs): don't auto-install docs like AUTHORS,
COPYING etc. let this the package-maintainer do. COPYING etc. let this the package-maintainer do.
Only the user-manual will be installed on your system Only the user-manual will be installed on your system
* fix 145 (clock-advanced prompt): fix calculating prompt-size * fix 145 (clock-advanced prompt): fix calculating prompt-size
...@@ -75,8 +75,8 @@ bashstyle-ng (8.3-1nano) unstable; urgency=low ...@@ -75,8 +75,8 @@ bashstyle-ng (8.3-1nano) unstable; urgency=low
ini-file for bs-ng-wizard (first update of the file in v8.3) ini-file for bs-ng-wizard (first update of the file in v8.3)
* install-extras: simple script to install other (possibly) * install-extras: simple script to install other (possibly)
insteressting stuff for bash (currently: bash-git-prompt) insteressting stuff for bash (currently: bash-git-prompt)
* nx-rc: dont pollute environment with useless variables * nx-rc: don't pollute environment with useless variables
* installdirs: dont create no longer used directories upon install * installdirs: don't create no longer used directories upon install
* colorshell: option to return to normal text-color after pressing enter * colorshell: option to return to normal text-color after pressing enter
* bs-ng-wizard: update ini_file to v2 (add color_shell_reset option) * bs-ng-wizard: update ini_file to v2 (add color_shell_reset option)
* configure 4.2.2: * configure 4.2.2:
......
...@@ -31,7 +31,7 @@ storing [Mingye Wang] ...@@ -31,7 +31,7 @@ storing [Mingye Wang]
@item #196 (nx-rc): fixup @code{lastexit} value storing [Mingye Wang] @item #196 (nx-rc): fixup @code{lastexit} value storing [Mingye Wang]
@item #197 (nano) (vim) (readline) (keybindings): fixup file existence checks @item #197 (nano) (vim) (readline) (keybindings): fixup file existence checks
which are intented to prevent file conflicts when multiple Bash sessions are which are intended to prevent file conflicts when multiple Bash sessions are
started at the same time [Mingye Wang] started at the same time [Mingye Wang]
@item #198 (nx-rc): fixup detection of vendor ini version on first load of nx-rc @item #198 (nx-rc): fixup detection of vendor ini version on first load of nx-rc
......
...@@ -36,9 +36,9 @@ This controls how many history entries are saved. 0 for infinite. ...@@ -36,9 +36,9 @@ This controls how many history entries are saved. 0 for infinite.
@end defvr @end defvr
@defvr {Setting} Sync History (Multisession) @defvr {Setting} Sync History (Multisession)
This is a BashStyle-NG extension wich allows syncronized history over multiple, This is a BashStyle-NG extension which allows syncronized history over multiple,
simultaneously running Bash sessions. It provides custom functions for history simultaneously running Bash sessions. It provides custom functions for history
controling aswell and history blacklisting is honoured aswell. controlling as well and history blacklisting is honoured as well.
@end defvr @end defvr
@heading BashStyle-NG @heading BashStyle-NG
...@@ -80,7 +80,7 @@ This option saves the last directory upon session exit. When a new session is ...@@ -80,7 +80,7 @@ This option saves the last directory upon session exit. When a new session is
started, Bash will automatically change into it. started, Bash will automatically change into it.
Note: if you've enabled either @code{lscd} or @code{treecd} the directory will Note: if you've enabled either @code{lscd} or @code{treecd} the directory will
be additonally saved everytime you change the directory, allowing you to start be additionally saved every time you change the directory, allowing you to start
a new shell in your current directory immediately. a new shell in your current directory immediately.
@end defvr @end defvr
...@@ -95,7 +95,7 @@ All @code{tree} options are supported, see @code{tree --help} for all possibilit ...@@ -95,7 +95,7 @@ All @code{tree} options are supported, see @code{tree --help} for all possibilit
@end defvr @end defvr
@defvr {Setting} Let @code{dd} continue on error @defvr {Setting} Let @code{dd} continue on error
Normally the @code{dd} utility will abort on the first occuring error. Enabling Normally the @code{dd} utility will abort on the first occurring error. Enabling
this will make @code{dd} displaying a warning and continuing it's work instead. this will make @code{dd} displaying a warning and continuing it's work instead.
This is mostly useful when dealing with damaged CDs or thelike. This is mostly useful when dealing with damaged CDs or thelike.
...@@ -132,7 +132,7 @@ Various options for Bash builtin functions and features. ...@@ -132,7 +132,7 @@ Various options for Bash builtin functions and features.
A colon separted list of directories to which's subdirectories @code{cd} can A colon separted list of directories to which's subdirectories @code{cd} can
directly change into. For example if @code{~/Desktop/myfancydir} exists and directly change into. For example if @code{~/Desktop/myfancydir} exists and
@code{~/Desktop} is in @code{CDPATH}, you can enter this directory from anywhere @code{~/Desktop} is in @code{CDPATH}, you can enter this directory from anywhere
by issueing @code{cd myfancydir}. by issuing @code{cd myfancydir}.
@end defvr @end defvr
@defvr {Setting} Completion Blacklist @defvr {Setting} Completion Blacklist
......
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
@chapter Configuration Files @chapter Configuration Files
While BashStyle-NG is able to auto-generate the configuration files based on While BashStyle-NG is able to auto-generate the configuration files based on
your choices in the UI, you might want to do manual additions aswell. your choices in the UI, you might want to do manual additions as well.
@heading Main Configuration Files @heading Main Configuration Files
@itemize @bullet @itemize @bullet
......
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
@chapter User Interface Icons @chapter User Interface Icons
BashStyle-NG uses Oxygen icons by default (supplied), but if the icons exist BashStyle-NG uses Oxygen icons by default (supplied), but if the icons exist
in your currently active GTK+ icon theme aswell, they will be used instead. in your currently active GTK+ icon theme as well, they will be used instead.
Those are 32x32 pixel icons, using the following names Those are 32x32 pixel icons, using the following names
@itemize @bullet @itemize @bullet
......
...@@ -84,7 +84,7 @@ the @code{**/} glob will match all directories and subdirectories, but no files. ...@@ -84,7 +84,7 @@ the @code{**/} glob will match all directories and subdirectories, but no files.
@defvr {Setting} checkjobs @defvr {Setting} checkjobs
Before exiting bash show the status of currently running background jobs. If there Before exiting bash show the status of currently running background jobs. If there
are any, the exit is delayed until a second attempt to prevent accidently killing are any, the exit is delayed until a second attempt to prevent accidentally killing
running jobs. running jobs.
@end defvr @end defvr
......
...@@ -1915,7 +1915,7 @@ msgid "" ...@@ -1915,7 +1915,7 @@ msgid ""
"\n" "\n"
" source /usr/share/bashstyle-ng/rc/nx-rc\n" " source /usr/share/bashstyle-ng/rc/nx-rc\n"
"\n" "\n"
"assuming /usr was the choosen install prefix. " "assuming /usr was the chosen install prefix. "
msgstr "" msgstr ""
"BashStyle-NG wird beim Shell-Start nicht geladen.\n" "BashStyle-NG wird beim Shell-Start nicht geladen.\n"
"\n" "\n"
...@@ -2542,7 +2542,7 @@ msgstr "Config" ...@@ -2542,7 +2542,7 @@ msgstr "Config"
#~ msgid "" #~ msgid ""
#~ "dd_noerror\n" #~ "dd_noerror\n"
#~ "\n" #~ "\n"
#~ "normally \"dd\" abort on any occuring error. This\n" #~ "normally \"dd\" abort on any occurring error. This\n"
#~ "will prevent dd from aborting, it will just report\n" #~ "will prevent dd from aborting, it will just report\n"
#~ "the read error and continue." #~ "the read error and continue."
#~ msgstr "" #~ msgstr ""
......
...@@ -118,7 +118,7 @@ msgid "Random Prompt" ...@@ -118,7 +118,7 @@ msgid "Random Prompt"
msgstr "Zufälliger Prompt" msgstr "Zufälliger Prompt"
#: rc/nx-rc:126 #: rc/nx-rc:126
msgid "randomly choosen" msgid "randomly chosen"
msgstr "zufällig ausgewählt" msgstr "zufällig ausgewählt"
#: rc/nx-rc:135 #: rc/nx-rc:135
...@@ -224,7 +224,7 @@ msgid "GIT user name" ...@@ -224,7 +224,7 @@ msgid "GIT user name"
msgstr "GIT Benutzername" msgstr "GIT Benutzername"
#: rc/settings/git-rc:20 #: rc/settings/git-rc:20
msgid "GIT user mail adress" msgid "GIT user mail address"
msgstr "GIT E-Mail-Adresse" msgstr "GIT E-Mail-Adresse"
#: rc/settings/git-rc:25 #: rc/settings/git-rc:25
......
...@@ -130,7 +130,7 @@ case ${1} in ...@@ -130,7 +130,7 @@ case ${1} in
-o "openhub:|open GitHub project page using x-www-browser"\ -o "openhub:|open GitHub project page using x-www-browser"\
-o "revision:|get 6 digit revision from a GIT repo"\ -o "revision:|get 6 digit revision from a GIT repo"\
-o "revno:|get traditional revision number from a GIT repo"\ -o "revno:|get traditional revision number from a GIT repo"\
-o "undelete:|undelete files accidently deleted locally" -o "undelete:|undelete files accidentally deleted locally"
;; ;;
esac esac
...@@ -13,7 +13,7 @@ case ${1} in ...@@ -13,7 +13,7 @@ case ${1} in
--help | -h) --help | -h)
bsng-help -a "Christopher Roy Bratusek" -e "nano@jpberlin.de" -h "http://www.nanolx.org/"\ bsng-help -a "Christopher Roy Bratusek" -e "nano@jpberlin.de" -h "http://www.nanolx.org/"\
-l "GNU GPL v3" -n "power" -s "calculater powers of numbers" -v "${BSNG_VERSION}" -y "${BSNG_YEAR}"\ -l "GNU GPL v3" -n "power" -s "calculate powers of numbers" -v "${BSNG_VERSION}" -y "${BSNG_YEAR}"\
-o "number:|number to calculate power from"\ -o "number:|number to calculate power from"\
-o "power:|(optional) power [or 2]" -o "power:|(optional) power [or 2]"
;; ;;
......
...@@ -16,7 +16,7 @@ case ${1} in ...@@ -16,7 +16,7 @@ case ${1} in
--help | -h | "") --help | -h | "")
bsng-help -a "joedhon" -e "" -h "http://www.commandlinefu.com/"\ bsng-help -a "joedhon" -e "" -h "http://www.commandlinefu.com/"\
-l "Public Domain" -n "quickscript"\ -l "Public Domain" -n "quickscript"\
-s "Create script from last commands in history, starting from last occurence of ###"\ -s "Create script from last commands in history, starting from last occurrence of ###"\
-v "${BSNG_VERSION}" -y "${BSNG_YEAR}"\ -v "${BSNG_VERSION}" -y "${BSNG_YEAR}"\
-o "file:|script filename" -o "file:|script filename"
;; ;;
......
...@@ -123,7 +123,7 @@ if [[ $(ini_get use_bashstyle) == True ]]; then ...@@ -123,7 +123,7 @@ if [[ $(ini_get use_bashstyle) == True ]]; then
11 ) pstyle=ayoli ;; 11 ) pstyle=ayoli ;;
esac esac
dbg_msg $"BashStyle-NG Setting:" ${pstyle} $"randomly choosen" dbg_msg $"BashStyle-NG Setting:" ${pstyle} $"randomly chosen"
else else
pstyle=$(ini_get prompt_style) pstyle=$(ini_get prompt_style)
[[ ${pstyle} == clock-ad ]] && pstyle="equinox" [[ ${pstyle} == clock-ad ]] && pstyle="equinox"
......
...@@ -17,7 +17,7 @@ if [[ $(ini_get git_user_name) != "" ]]; then ...@@ -17,7 +17,7 @@ if [[ $(ini_get git_user_name) != "" ]]; then
fi fi
if [[ $(ini_get git_user_mail) != "" ]]; then if [[ $(ini_get git_user_mail) != "" ]]; then
dbg_msg $"BashStyle-NG Setting:" $"GIT user mail adress" dbg_msg $"BashStyle-NG Setting:" $"GIT user mail address"
dbg_log git config --global user.email "$(ini_get git_user_mail)" dbg_log git config --global user.email "$(ini_get git_user_mail)"
fi fi
......
...@@ -7127,7 +7127,7 @@ You can add the entry manually like: ...@@ -7127,7 +7127,7 @@ You can add the entry manually like:
source /usr/share/bashstyle-ng/rc/nx-rc source /usr/share/bashstyle-ng/rc/nx-rc
assuming /usr was the choosen install prefix. </property> assuming /usr was the chosen install prefix. </property>
</object> </object>
<packing> <packing>
<property name="expand">False</property> <property name="expand">False</property>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment