Commit 9a6fe129 authored by Eric S. Raymond's avatar Eric S. Raymond

Address GitLab issue #237: documentation refclock pps missing unit description

parent 51ec6156
Pipeline #11036396 passed with stages
in 12 minutes and 31 seconds
......@@ -99,6 +99,9 @@ over the last 16 seconds.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -433,6 +433,9 @@ screen width and looks similar to:
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ _time_ ::
Specifies the time offset calibration factor, in seconds and fraction.
The default value depends on the clock type.
......
......@@ -194,6 +194,9 @@ since the last poll.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the PPS time offset calibration factor, in seconds and
fraction, with default 0.0.
......
......@@ -67,6 +67,9 @@ http://www.symmetricom.com/[Symmetricom].
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -363,6 +363,9 @@ filegen clockstats file clockstats type day enable
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -37,6 +37,8 @@ No +filegen clockstats+ monitor data are produced by this driver.
== Driver Options ==
+unit+ 'number'::
Not used by this driver.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -53,6 +53,9 @@ Format].
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -132,6 +132,9 @@ with the Hayes connection and hang-up commands and result codes.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -217,6 +217,9 @@ switched on by sending the following string.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the PPS time offset calibration factor, in seconds and
fraction, with default 0.0.
......
......@@ -64,6 +64,9 @@ specific receiver in use will be required.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -90,6 +90,9 @@ synchronization without needing the Internet at all.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -154,6 +154,9 @@ for the specific unit.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the IPC unit name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
with default 0.0.
......
......@@ -85,6 +85,9 @@ received.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the PPS time offset calibration factor, in seconds and
fraction, with default 0.0.
......
......@@ -101,6 +101,9 @@ written as-is to the +clockstats+ file.
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Specifies the time offset calibration factor, in seconds and fraction,
to be used for the West satellite, with default 0.0.
......
......@@ -25,6 +25,9 @@ link:refclock.html[Reference Clock Drivers]
== Driver Options ==
+unit+ 'number'::
The driver unit number, defaulting to 0. Used as a distinguishing
suffix in the driver device name.
+time1+ 'time'::
Not used by this driver.
+time2+ 'time'::
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment