Commit aca7b507 authored by Alan Wood's avatar Alan Wood

Documentation added minor changes

parent bbb8f3b0
......@@ -57,7 +57,7 @@ platformio run
is build for each environment, in our case an Ice lattice build and an STM32 arm build. If you peak into your .pioenvs directory you will see the results of this process (you may have to dig down a little). However right now platformio doesn't understand how we have to structure the two builds with relation to each other, as we need them connected, let me explain.
The way myStorm currently works is as follows:
*1. Build the FPGA target with IceStorm from Verilog/pcf sources, using Yosys and then Arachnepnr to create a bitimage for the ice40.
* 1. Build the FPGA target with IceStorm from Verilog/pcf sources, using Yosys and then Arachnepnr to create a bitimage for the ice40.
* 2. Convert the bitimage to an objectfile with the correct symbols
* 3. Compile the stm32 source code c/c++ using Arm-eabi tools
* 4 Link it all in and create the bin/hex etc..
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment