Commit 82dd82db authored by Alan Wood's avatar Alan Wood

Added lisence header to verilog tutorial files

parent 22c46a60
/******************************************************************************
* *
* Copyright 2016 myStorm Copyright and related *
* rights are licensed under the Solderpad Hardware License, Version 0.51 *
* (the “License”); you may not use this file except in compliance with *
* the License. You may obtain a copy of the License at *
* http://solderpad.org/licenses/SHL-0.51. Unless required by applicable *
* law or agreed to in writing, software, hardware and materials *
* distributed under this License is distributed on an “AS IS” BASIS, *
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or *
* implied. See the License for the specific language governing *
* permissions and limitations under the License. *
* *
******************************************************************************/
module LED_top(
// 50MHz clock input
input clk,
......
/******************************************************************************
* *
* Copyright 2016 myStorm Copyright and related *
* rights are licensed under the Solderpad Hardware License, Version 0.51 *
* (the “License”); you may not use this file except in compliance with *
* the License. You may obtain a copy of the License at *
* http://solderpad.org/licenses/SHL-0.51. Unless required by applicable *
* law or agreed to in writing, software, hardware and materials *
* distributed under this License is distributed on an “AS IS” BASIS, *
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or *
* implied. See the License for the specific language governing *
* permissions and limitations under the License. *
* *
******************************************************************************/
module blinker(
input clk,
input rst,
output blink
);
module blinker( inputclk, input rst, output blink );
reg [24:0] counter_d, counter_q;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment