<!-- When naming the support request please title the request as `[New Device] <Name of new device>` Please open one issue per device you would like to add --> ### Name of device: <!-- Please put the name of the product, including manufacturer, beneath this line --> Please Add Support for Corsair K57 Wireless keyboard, currently ICUE eats un-necessary amount of CPU / Ram resources for the keyboard, my Keyboard is the Corsair Series K57 Wireless Keyboard (Walmart special brand i.e in store buy for cheap but does the job) ### Link to manufacturer's product page: <!-- Please add a link to the manufacturer's product page beneath this line --> https://www.corsair.com/us/en/Categories/Products/Gaming-Keyboards/Standard-Gaming-Keyboards/K57-RGB-WIRELESS-Gaming-Keyboard/p/CH-925C015-NA ### Please select what type of device/interface the device uses: <!-- Please select from one of the following This determines how the device connects to the PC --> ~"DeviceType::USB" <!-- The device connects to an internal header or external usb port --> <!-- Please delete any lines that are not relevant --> ### ID information: <!-- For PCI (GPU) devices we will need the Vendor ID, Device ID, Sub-Vendor ID and Sub-Device IDs In Windows this can be found under the device manager and on Linux this can be found with lspci -vv For USB devices we will need the USB VID and PID -->  ### Please attach screenshots of the device's official control application here: <!-- Screenshots of the official control software should show lists of supported modes, color selection, and zone/LED selection capabilities of the device's official software. -->   ### Please attach device captures here: <!-- If you have code examples from other projects please link them here or alternatively for information on how to capture device packets please refer to the wiki article https://gitlab.com/Dr_No/OpenRGB/-/wikis/OpenRGB-doesn%27t-have-my-device --> [Color_Shift_Slow_-_Medium_-_fast_mode.pcapng](/uploads/25bbb16bd65f15b044b02bd812d676d3/Color_Shift_Slow_-_Medium_-_fast_mode.pcapng) [Initialize_and_color_changing.pcapng](/uploads/13eec279f236e22199aa5bc7beacf6b2/Initialize_and_color_changing.pcapng) [Visor_Mode.pcapng](/uploads/2aeca86734d7d338495a79e26bf20744/Visor_Mode.pcapng) <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [X] Name of device - [x] A link to the vendors product page has been included - [X] The transport bus has been identified and the appropriate label added to the issue. - [x] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [x] Screenshots of the OEM Application are included - [x] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->