### Name of device: MPG Z890I EDGE TI WIFI ### Link to manufacturer's product page: https://www.msi.com/Motherboard/MPG-Z890I-EDGE-TI-WIFI/Overview ### Please select what type of device/interface the device uses: ~"DeviceType::USB" ### ID information: Manufacturer: MSI Board Model: MPG Z890I EDGE TI WIFI (MS-7E33) PCI Vendor ID: 0x8086 (Intel) PCI Device ID: 0x7F23 (Arrow Lake-S PCH SMBus) Subsystem ID: 1462:7E33 USB VID: 0DB0 (MSI) USB PID: 0076 [OpenRGB_20260324_235236.log](/uploads/52b68e04ef440d3fce05bd70f1b6c47d/OpenRGB_20260324_235236.log) ### Please attach screenshots of the device's official control application here: {width=1428 height=867} ### Please attach device captures here: [MSI_Z890_7E33_RGB_Capture2.pcapng](/uploads/421345800b115d6b5632ddb96d268730/MSI_Z890_7E33_RGB_Capture2.pcapng) I've captured the USB data for VID:0DB0 PID:0076. RGB Commands: 326 bytes. Attached is a clean capture containing: Static Red(255, 0, 0), Green(0, 255, 0), Blue(0, 0, 255), and Off sequences. The device is confirmed as USB HID on my MSI Z890I EDGE TI WIFI. <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [ ] Name of device - [ ] A link to the vendors product page has been included - [ ] The transport bus has been identified and the appropriate label added to the issue. - [ ] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [ ] Screenshots of the OEM Application are included - [ ] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->