<!-- When naming the support request please title the request as `[New Device] <Name of new device>` Please open one issue per device you would like to add --> ### Name of device: <!-- Please put the name of the product, including manufacturer, beneath this line --> Corsair DOMINATOR TITANIUM RGB 96GB (2x48GB) DDR5 DRAM 6600MT/s CL32 Intel XMP Memory Kit (PC5 52800) Desktop Memory Model CMP96GX5M2B6600C32 ### Link to manufacturer's product page: <!-- Please add a link to the manufacturer's product page beneath this line --> https://www.corsair.com/us/en/p/memory/cmp96gx5m2b6600c32/dominator-titanium-rgb-2x48gb-ddr5-dram-6600mt-s-cl32-intel-xmp-memory-kit-cmp96gx5m2b6600c32 ### Please select what type of device/interface the device uses: <!-- Please select from one of the following This determines how the device connects to the PC --> ~"DeviceType::IDK" <!-- I Don't know --> ~"DeviceType::SMBus" <!-- The device is connected to the SMBus eg. RAM --> <!-- Please delete any lines that are not relevant --> ### ID information: <!-- For PCI (GPU) devices we will need the Vendor ID, Device ID, Sub-Vendor ID and Sub-Device IDs To get the Device ID formation for a GPU on Windows run the following command in Powershell: wmic path Win32_VideoController get name,PNPDeviceID Linux this can be found using the terminal: lspci -d 1002: -nnvm | head -6 | tail -n 4 && lspci -d 10DE: -nnvm | head -6 | tail -n 4 --> <!-- For USB devices we will need the USB VID and PID Windows Powershell: gwmi Win32_USBControllerDevice |%{[wmi]($_.Dependent)} | Sort Manufacturer,Description,DeviceID | Ft -GroupBy Manufacturer Description,Service,DeviceID Linux Terminal: lsusb --> ### Please attach screenshots of the device's official control application here: <!-- Screenshots of the official control software should show lists of supported modes, color selection, and zone/LED selection capabilities of the device's official software. --> N/A (using Linux) ### Please attach device captures here: <!-- If you have code examples from other projects please link them here or alternatively for information on how to capture device packets please refer to the wiki article https://gitlab.com/Dr_No/OpenRGB/-/wikis/OpenRGB-doesn%27t-have-my-device --> <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [x] Name of device - [x] A link to the vendors product page has been included - [x] The transport bus has been identified and the appropriate label added to the issue. - [ ] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [ ] Screenshots of the OEM Application are included - [ ] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->