<!-- When naming the support request please title the request as `[New Device] <Name of new device>` Please open one issue per device you would like to add --> ### Name of device: <!-- Please put the name of the product, including manufacturer, beneath this line --> EVGA Z12 ### Link to manufacturer's product page: <!-- Please add a link to the manufacturer's product page beneath this line --> https://www.evga.com/products/product.aspx?pn=834-W0-12US-KR ### Please select what type of device/interface the device uses: ~"DeviceType::USB" <!-- The device connects to an internal header or external usb port --> <!-- Please delete any lines that are not relevant --> ### ID information: Linux Terminal: lsusb --> Bus 001 Device 017: ID 3842:2612 EVGA Z12 Gaming Keyboard ### Please attach screenshots of the device's official control application here: <!-- Screenshots of the official control software should show lists of supported modes, color selection, and zone/LED selection capabilities of the device's official software. --> <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [x] Name of device - [x] A link to the vendors product page has been included - [x] The transport bus has been identified and the appropriate label added to the issue. - [x] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [ ] Screenshots of the OEM Application are included - [ ] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->