TeamGroup T-Force Delta DDR5 RGB memory not detecting zones or LEDs properly - locking up entire system even without assigning it to PC randomly.
Name of device:
TEAMGROUP T-FORCE DELTA RGB DDR5 48GB (2x24GB) 7200Mhz Memory
Link to manufacturer's product page:
https://www.amazon.com/gp/product/B0C461BNRG
Please select what type of device/interface the device uses:
Please attach screenshots of the device's official control application here:
NA - no app.
System is rock solid when openRGB is closed. Once I open it - whether admin or not - it will sometimes detect zones or LED count for the memory, which shows up as ENE DRAM, but then the system locks up if I try to change any settings in OpenRGB. OpenRGB also seems to ask me for all of my corsair zone LED quantities each time I load it with this memory installed. I've used G.Skill memory for over a year in this system, but upgraded to the faster memory now. I've updated to the latest OpenRGB v.0.9 now in hopes to properly ID the memory and change it's colors, but the system will lock up if I try to use OpenRGB currently.
The last time I loaded OpenRGB, one stick has no zones, but the other stick has "DRAM" and "unknown" for zones. DRAM has 255 count for LEDs. "Unknown" has 506 unknown LEDs listed. When I tried to manually test the lights - I counted up to 8 LEDs on each stick of RAM. LED 9 and onwards did not change anything. The system locks up after about 60 seconds or so of OpenRGB being open if I'm trying to use an effect on the memory.
Checklist for Step2
-
Name of device -
A link to the vendors product page has been included -
The transport bus has been identified and the appropriate label added to the issue. -
The device ID's have been included for USB or PCI -
Screenshots of the OEM Application are included -
There is either, appropriate code examples linked or suitable device captures attached