New Device Steelseries USB controller (lightbar and logo) on MSI GE 68/78

Name of device:

MSI GE 68/78 HX 13V

Link to manufacturer's product page:

https://www.msi.com/Laptop/Raider-GE68-HX-13VX/support https://www.msi.com/Laptop/Raider-GE78-HX-13VX/support

Please select what type of device/interface the device uses:

DeviceTypeUSB

ID information:

USB VID/PID: VID 0x1038 and PID 0x114B

Please attach screenshots of the device's official control application here:

gg2ggcolorshift

Please attach device captures here:

2facedalllights.pcapng

2facedfulllightbar.pcapng

2facedlogoonly.pcapng

2facedonelightbarlight.pcapng

The first capture is with all lights set to #2faced, the second capture is with all lightbar lights set to #2faced, the third capture is only the logo on the back of the screen set to #2faced, and the fourth capture is with just one light of the lightbar lit to #2faced.\

Checklist for Step2

  • Name of device
  • A link to the vendors product page has been included
  • The transport bus has been identified and the appropriate label added to the issue.
  • The device ID's have been included for USB or PCI
  • Screenshots of the OEM Application are included
  • There is either, appropriate code examples linked or suitable device captures attached
Edited by Chris M