[Bug Report] OpenRGB does not set all zones on first try

Description of Bug

When applying a color or a profile to all zones of my device using direct mode, only one single zone gets actually set the first time. Applying the same color or profile again then successfully sets it to all zones. This happens using a Razer RGB Controller with five devices attached once after each boot. Starting OpenRGB and then clicking on a single color in the device sets it only to zone Channel 6, clicking it again sets it to all zones. This is reproducible for some time now.

I removed the whole OpenRGB config folder and set up everything again, with the same results.

During startup I used this command in a systemd unit for some time:

ExecStart=/usr/bin/openrgb --config /home/bioxz/.config/OpenRGB/ --noautoconnect -c FFFFFF -b 100

which shows the same behavior. Only zone channel 6 is set. When I restart the unit, all zones get set.

Attached Log

OpenRGB_20231226_140416.log

Operating System

OS - Linux

Hardware Configuration

  • X670 AORUS ELITE AX (ARGB)
    • 2x unused
  • Razer Chroma Adressable RGB Controller (ARGB)
    • 2x BeQuiet fans
    • 2x LED light bars
    • 1x Phanteks fan
    • 1x unused