[New Device] <JGINYUE 600/700 series MotherBoard>

Name of device:

JGINYUE 600/700 series MotherBoard including:

Z790M Snow Dream / B760M Snow Dream / H610M HD / H610M GAMING / H610M GAMING D5 / H610I GAMING / B660I Snow Dream / B760I Snow Dream D5 / B760I Snow Dream / B760I GAMING / B760M GAMING / B760M GAMING D5 / B760M-VDH / B760M HD

Link to manufacturer's product page:

http://jginyue.com.cn/ (May hard to access due to Firewall policy)

Please select what type of device/interface the device uses:

~"DeviceType::GPIO"

ID information:

Detect device by motherboard DMIinfo;And have GPIO access by inpoutX64.dll to control GPIO register 0xE06A0A50,write in 0x84000201 for High and 84000200 for low.

Please attach screenshots of the device's official control application here:

The first offical supported control software is OpenRGB.All the motherboard in this series have same physical layout ,have one or two 5V3pin headers but one zone.Color selection contains 0x000000-0xFFFFFF(GGRRBB).And support per LED control,direct control and effects.The device don't support save. In 8/23-8/25 our customers check the per LED control,direct control and effects.All these functions work properly.

Please attach device captures here:

We introduce our lib:openJGINYUErgb.dll into the project.And we fork our lib to an open-source project https://gitlab.com/SU_YongHang_electronic/open_jginyue_argb_lib .Compared to the lib we used,open-source projects don't have the configed GPIO address , to make it easier for other people using different GPIOs layout to use this lib and avoid the legal risks of infringement to intel.If you need the source code of the lib,I can provide the project file privately.

The fork waited to be merged:https://gitlab.com/SU_YongHang_electronic/open-rgb-jginyue-gpio-argb

Checklist for Step2

  • Name of device
  • A link to the vendors product page has been included
  • The transport bus has been identified and the appropriate label added to the issue.
  • The device ID's have been included for USB or PCI
  • Screenshots of the OEM Application are included
  • There is either, appropriate code examples linked or suitable device captures attached
Edited by Tong R