[New Device] E-YOOSO X-11 Wireless mouse

Name of device:

E-YOOSO X-11 Wireless/Wired Mouse (1000 DPI)

Link to manufacturer's product page:

http://eyspc.com/

1000 DPI: https://www.amazon.com/X-11-Wireless-Programmable-Recording-Computer/dp/B08XTWTYBV

8000 DPI: https://www.amazon.com/YOOSO-X-11-Rechargeable-Programmable-Programming/dp/B09V6LQL2X

software: https://drive.google.com/file/d/1PU8uWK7bRJgi9Md2H-wDLzp4Bxxei0ZU/view?usp=sharing

The official link doesn't work?: eyspc.com/dr/MOK0003.rar -source 8000 DPI amazon page

Please select what type of device/interface the device uses:

DeviceTypeUSB

ID information:

image

Please attach screenshots of the device's official control application here:

image image image image

The mouse has a "mode switch" button on the bottom and can switch modes to have two different profiles. The device also has two power modes, regular (side + mouse wheel lighting), and eco (only mouse wheel lighting). Mouse wheel color is controlled by checked DPI color under the advance tab, while side lighting is controlled under the lighting tab.

I'm prob the only person who is using this mouse here but it would be cool if device support for my mouse could be added lol. If you have any questions or would like me to test stuff, feel free to reply or reach out over discord at Funtimesgetfunner#8807. I am in the OpenRGB discord.

Thanks again!

Please attach device captures here:

The mouse wheel can only do the Respiration effect image If yall need anything else feel free to let me know.

X-11_ReportDescriptor.pcapng

connecting_device_to_pc_and_opening_app.pcapng

mouse_wheel__Respiration__along_with_brightness_and_speed.pcapng

setting_sides_and_mouse_wheel_to_blue.pcapng

setting_sides_and_mouse_wheel_to_green.pcapng

setting_sides_and_mouse_wheel_to_off.pcapng

setting_sides_and_mouse_wheel_to_red.pcapng

side_rgb__Respiration_+_Streaming__along_with_brightness_and_speed_for_each.pcapng

Checklist for Step2

  • Name of device
  • A link to the vendors product page has been included
  • The transport bus has been identified and the appropriate label added to the issue.
  • The device ID's have been included for USB or PCI
  • Screenshots of the OEM Application are included
  • There is either, appropriate code examples linked or suitable device captures attached
Edited by legouju