[New Device] Please add support for STRIMER L-Connect 3 Controller
[New Device] Please add support for STRIMER L-Connect 3 Controller
Name of device:
Lian Li STRIMER L-Connect 3 Controller
Link to manufacturer's product page:
https://lian-li.com/product/strimer-l-connect-3-controller/
Please select what type of device/interface the device uses:
ID information:
It is the WinUSB Device at very low of the List of the txt file Powershell_USB.txt
Please attach screenshots of the device's official control application here:
The ability to set colors on up to 6 channels per STRIMER Device
lets call the Zones -> Lights/Leds 1-6 for our controller,
and the Stimmer Devices 1 and 2 -> Zones 1 and 2 in the controller
Please attach device captures here:
Sadly the Software asks for i think a temperature value in like 1-3 sec intervalls so it is hard to make clean captures
USB Plug In (Descriptor): USB_Plug_in__no_software_running_.pcapng
Set Black to all 6 Channels on both Devices Set_all_Black__29_and30_sec_at_time_.pcapng
(Set Black should be done when initialize the controller to remove default rainbow may set)
Set all Red to all 6 Channels on both Devices Set_all_Red__3_and_4_sec_at_time_.pcapng
Set all Green to all 6 Channels on both Devices Set_all_Green__5_and_6_sec_at_time_.pcapng
Set all Blue to all 6 Channels on both Devices Set_all_Blue__4_and_5_sec_at_time_.pcapng
Checklist for Step2
-
Name of device -
A link to the vendors product page has been included -
The transport bus has been identified and the appropriate label added to the issue. -
The device ID's have been included for USB or PCI -
Screenshots of the OEM Application are included -
There is either, appropriate code examples linked or suitable device captures attached