Support for the Corsair Hydro H150i Platinum

Hi. Was wondering if there will be any type of support for the Corsair Hydro H150i Platinum. I know there's support for the H100i and the H115i so wondering if there will be support for the H150i since I assume it's the same product but different descriptions software side. Will there be a way to somehow manipulate it so that it can show up as a H115i? Thanks in advance.

Name of device:

Hydro Series™ H150i PRO RGB 360mm Liquid CPU Cooler

Link to manufacturer's product page:

https://www.corsair.com/us/en/Categories/Products/Liquid-Cooling/Hydro-Series%E2%84%A2-PRO-RGB-Liquid-CPU-Coolers/p/CW-9060031-WW

Please select what type of device/interface the device uses:

DeviceTypeUSB

ID information:

SIUSBXP USB\VID_1B1C&PID_0C12\7289_2.0

Please attach screenshots of the device's official control application here:

Please attach device captures here:

Captures: Red_Capture_File.pcapng Green_Capture_File.pcapng Blue_Capture_File.pcapng

Modes: All_Colors_Capture_File.pcapng Off_Capture_File.pcapng Color_Shift_Capture_File.pcapng Color_Pulse_Mode_Shift_Capture_File.pcapng ... xxxx_xxxx_ReportDescriptor.pcapng

Checklist for Step2

• Name of device
• A link to the vendors product page has been included
• The transport bus has been identified and the appropriate label added to the issue.
• The device ID's have been included for USB or PCI
• Screenshots of the OEM Application are included
• There is either, appropriate code examples linked or suitable device captures attached