[New Device] Cooler Master MM731
Name of device:
Cooler Master MM731
Link to manufacturer's product page:
https://www.coolermaster.com/catalog/peripheral/mice/mm731/
Please select what type of device/interface the device uses:
ID information:
VID_2516&PID_0167
Please attach screenshots of the device's official control application here:
TBA, Sorry I was pressed for time. Masterplus software screenshots online give a good idea until I can get better.
Please attach device captures here:
These were captured by a noob in a rush. I hope they'll do. I hope to be able to grab more later.
Plug and unplug MM731_ReportDescriptor.pcapng
Switch to red (Sorry, the filter was capturing everything here) MM731_Red.pcapng
Switch to green MM731_Green.pcapng
Switch to blue MM731_Blue.pcapng
Switch Off MM731_Off.pcapng
Switch on, set to white, modulate full range of brightness MM731_On_White_Brightness.pcapng
Switch to breathing, set to white, set full brightness MM731_Breathing_White_Full_Bright.pcapng
Switch to colour cycle, set full brightness, modulate speed (5 steps, low to high) MM731_Cycle_Full_Bright_Speed_Slow_to_Fast_5Steps.pcapng
Checklist for Step2
-
Name of device -
A link to the vendors product page has been included -
The transport bus has been identified and the appropriate label added to the issue. -
The device ID's have been included for USB or PCI -
Screenshots of the OEM Application are included -
There is either, appropriate code examples linked or suitable device captures attached